EmbeddedRelated.com
The 2024 Embedded Online Conference

C to C++: 5 Tips for Refactoring C Code into C++

Jacob Beningo July 23, 20235 comments

The article titled "Simple Tips to Refactor C Code into C++: Improve Embedded Development" provides essential guidance for embedded developers transitioning from C to C++. The series covers fundamental details necessary for a seamless transition and emphasizes utilizing C++ as a better C rather than diving into complex language features. The article introduces five practical tips for refactoring C code into C++. Replace #define with constexpr and const: Discouraging the use of #define macros, the article advocates for safer alternatives like constexpr and const to improve type safety, debugging, namespaces, and compile-time computation. Use Namespaces: Demonstrating the benefits of organizing code into separate logical groupings through namespaces, the article explains how namespaces help avoid naming conflicts and improve code readability. Replace C-style Pointers with Smart Pointers and References: Emphasizing the significance of avoiding raw pointers, the article suggests replacing them with C++ smart pointers (unique_ptr, shared_ptr, weak_ptr) and using references


NULL pointer protection with ARM Cortex-M MPU

Miro Samek July 16, 2023

This post explains how you can set up the ARM Cortex-M MPU (Memory Protection Unit) to protect thy code from dragons, demons, core dumps, and numberless other foul creatures awaiting thee after thou dereference the NULL pointer.


Getting Started with (Apache) NuttX RTOS Part 2 - Looking Inside and Creating Your Customized Image

Alan C Assis July 5, 2023

In the previous article (https://www.embeddedrelated.com/showarticle/1524.p...) we saw how to run NuttX RTOS using the SIMulator. Today we will see how NuttX's directory tree is organized and how to use the menuconfig to enable some applications, including some tricks to search and solve dependencies.

NuttX Directories organization:

If you have previously compiled the Linux kernel or the U-Boot bootloader you will see that the NuttX source tree organization is very...


Getting Started With Zephyr: Kconfig

Mohammed Billoo June 22, 2023

In this blog post, we briefly look at Kconfig, one of the core pieces of the Zephyr infrastructure. Kconfig allows embedded software developers to turn specific subsystems on or off within Zephyr efficiently and control their behavior. We also learn how we can practically use Kconfig to control the features of our application using the two most common mechanisms.


Getting Started with (Apache) NuttX RTOS - Part 1

Alan C Assis June 2, 20234 comments

NuttX RTOS is used in many products from companies like Sony, Xiaomi, Samsung, Google/Fitbit, WildernessLabs and many other companis. So, probably you are already using NuttX even without knowing it, like the you was using Linux on your TV, WiFi router more than 10 years ago and didn't know too! Today you will have the chance to discover a little bit of this fantastic Linux-like RTOS! Are you ready? So, let's get started!


STM32 B-CAMS-OMV Walkthrough

Peter McLaughlin April 30, 20231 comment

The STM32 B-CAMS-OMV camera module offers an accessible way to get started with embedded vision. Coupled with the STM32H747I-DISCO discovery kit and the FP-AI-VISION1 function pack, it's possible to be up and running in minutes.

This video describes the camera connection interface to the discovery kit and the key software functions required to control the camera and process its data. We review the ISP (Image Signal Processor) interface with examples of image processing...


STM32 VS Code Extension Under The Hood

Peter McLaughlin April 21, 2023

VS Code is becoming the "go to" environment for many developers. Increasingly, toolchain providers are publishing VS Code extensions and ST has recently followed suit. Additionally, CMake is significantly growing in popularity, with many projects adopting it for its ease of use and flexibility. This video shows how the STM32 VS Code extension works under the hood and how to get more out of it.

Specifically, we'll review the CMake files generated by the VS Code extension and how to modify...


C to C++: 3 Reasons to Migrate

Jacob Beningo October 31, 202222 comments

I’ve recently written several blogs that have set the stage with a simple premise: The C programming language no longer provides embedded software developers the tools they need to develop embedded software throughout the full software stack. Now, don’t get me wrong, C is a powerhouse, with over 80% of developers still using it; however, as embedded systems have reached unprecedented levels of complexity, C might not be the right tool for the job.

In this post, I’m kicking off a series...


3 Overlooked Embedded Software Elements

Jacob Beningo July 9, 20223 comments

Have you ever wondered, while you and your team are busy writing software if the foundation of how embedded software systems are built has changed and left you in the dust? What if while you were busily focusing on getting your product out the door, fighting bugs, and dealing with supply issues, there were techniques and processes that you completely overlooked that could save the day? I’ve found three elements embedded software teams often underutilize that could dramatically improve...


From Baremetal to RTOS: A review of scheduling techniques

Jacob Beningo June 8, 201617 comments

Transitioning from bare-metal embedded software development to a real-time operating system (RTOS) can be a difficult endeavor. Many developers struggle with the question of whether they should use an RTOS or simply use a bare-metal scheduler. One of the goals of this series is to walk developers through the transition and decision making process of abandoning bare-metal thinking and getting up to speed quickly with RTOSes. Before diving into the details of RTOSes, the appropriate first step...


Introduction to Microcontrollers - Button Matrix & Auto Repeating

Mike Silva November 12, 2013

Too Many Buttons, Not Enough Inputs

Assigning one GPIO input to each button can use up a lot of GPIO pins.  Numeric input requires at least 10 buttons, plus however many additional control or function buttons.  This can quickly get expensive, GPIO pin-wise, and also connector-wise if the keypad is off the uC PCB as it often would be.  A very common response to this expense is to wire buttons (keys, etc) in a matrix.  By connecting our buttons in an...


Introduction to Microcontrollers - 7-segment displays & Multiplexing

Mike Silva August 14, 20141 comment

Doing the 7 Segment Shuffle

The 7 segment display is ubiquitous in the modern world.  Just about every digital clock, calculator and movie bomb has one.  The treadmills at my gym have 6 or 7, each one displaying 3 or 4 digits.  What makes the 7-seg interesting is that it presents an opportunity to make a trade off between GPIO (output pins) for time.  Every 7-seg display requires 8 outputs (the 7 segments and usually either a decimal point or a...


Cortex-M Exception Handling (Part 1)

Ivan Cibrario Bertolotti November 28, 20152 comments

This article describes how Cortex-M processors handle interrupts and, more generally, exceptions, a concept that plays a central role in the design and implementation of most embedded systems.


Introduction to Microcontrollers - More On Interrupts

Mike Silva September 25, 2013

A Little More Detail About The Interrupt Mechanism

It's time to look a little closer at what happens in an interrupt request and response.  Again this is in general terms, and different microcontroller designs may do things somewhat differently, but the basics remain the same.  Most but not all interrupt requests are latched, which means the interrupt event sets a flag that stays set even if the interrupt event then goes away.  It is this latched flag...


Arduino robotics #4 - HC-SR04 ultrasonic sensor

Lonnie Honeycutt October 20, 20131 comment
Arduino Robotics

Arduino robotics is a series of article chronicling my first autonomous robot build, Clusterbot.  This build is meant to be affordable, relatively easy and instructive.  The total cost of the build is around $50.  

1. Arduino robotics - motor control2. Arduino robotics - chassis, locomotion and power3. Arduino robotics - wiring, coding and a test run4.

Slew Rate Limiters: Nonlinear and Proud of It!

Jason Sachs October 6, 2014

I first learned about slew rate limits when I was in college. Usually the subject comes up when talking about the nonideal behavior of op-amps. In order for the op-amp output to swing up and down quickly, it has to charge up an internal capacitor with a transistor circuit that’s limited in its current capability. So the slew rate limit \( \frac{dV}{dt} = \frac{I_{\rm max}}{C} \). And as long as the amplitude and frequency aren’t too high, you won’t notice it. But try to...


From bare-metal to RTOS: 5 Reasons to use an RTOS

Jacob Beningo October 18, 20167 comments

Developers can come up with amazing and convoluted reasons to not use an RTOS. I have heard excuses ranging from they are too expensive (despite open source solutions) all the way to they aren’t efficient and use too much memory. In some circumstances some excuses are justified but there are many reasons why a developer should look to an RTOS to help with their real-time scheduling needs.

From bare-metal to RTOS Quick Links
  • Part 1: 

Cortex-M Exception Handling (Part 2)

Ivan Cibrario Bertolotti February 1, 20169 comments

The first part of this article described the conditions for an exception request to be accepted by a Cortex-M processor, mainly concerning the relationship of its priority with respect to the current execution priority. This part will describe instead what happens after an exception request is accepted and becomes active.

PROCESSOR OPERATION AND PRIVILEGE MODE

Before discussing in detail the sequence of actions that occurs within the processor after an exception request...


OOKLONE: a cheap RF 433.92MHz OOK frame cloner

Fabien Le Mentec August 12, 201417 comments
Introduction

A few weeks ago, I bought a set of cheap wireless outlets and reimplemented the protocol for further inclusion in a domotics platform. I wrote a post about it here:

//www.embeddedrelated.com/showarticle/620.php

Following that, I had access to another outlet from a different vendor:

http://www.castorama.fr/store/Prise-telecommandee-BLYSS---Interieur-prod4470027.html

The device documentation mentions that it operates on the same frequency as the previous...


The 2024 Embedded Online Conference