SEGGER's 25th Anniversary Video
Chances are you will find this video more interesting to watch if you take five minutes to first read the story of the week I spent at SEGGER's headquarters at the end of June.
The video is only a little more than 2 minutes long. If you decide to watch it, make sure to go full screen and I would really love to read your thoughts about it in the comments down bellow. Do you think a video like this succeeds in making the viewer want to learn more about the company?...
Went 280km/h (174mph) in a Porsche Panamera in Germany!
Those of you who've been following my blog lately already know that I am going through some sort of mid-life crisis that involves going out there to meet people and make videos. It all started with Embedded World early this year, then continued at ESC Boston a couple of months ago and the latest chapter just concluded as I returned from Germany after spending a week at SEGGER's headquarters to produce a video to highlight their 25th anniversary.
VERY Fast Japanese Sumo Robots
For some reasons, I could not stop watching. I would love to have the maker of one of these robots to blog about the project here on EmbeddedRelated.com, the sensors, microcontroller, algorithms and the challenges... This would make for a very interesting read! Do you know someone?
Going back to Germany!
A couple of blog posts ago, I wrote that the decision to go to ESC Boston ended up being a great one for many different reasons. I came back from the conference energized and really happy that I went.
These feelings were amplified a few days after my return when I received an email from Rolf Segger, the founder of SEGGER Microcontroller (check out their very new website), asking if I would be interested in visiting their headquarters...
ESC Boston's Videos are Now Up
In my last blog, I told you about my experience at ESC Boston and the few videos that I was planning to produce and publish. Here they are, please have a look and any feedback (positive or negative) is appreciated.
Short HighlightThis is a very short (one minute) montage of some of the footage that I shot at the show & conference. In future shows, I absolutely need to insert clips here and there of engineers saying a few words about the conference (why they...
Back from ESC Boston
NOT going to ESC Boston would have allowed me to stay home, in my comfort zone.
NOT going to ESC Boston would have saved me from driving in the absolutely horrible & stressful Boston traffic1.
NOT going to ESC Boston would have saved me from having to go through a full search & questioning session at the Canada Customs on my return2.
2017/06/06 update: Videos are now up!So two days...
Launch of Youtube Channel: My First Videos - Embedded World 2017
I went to Embedded World 2017 in Nuremberg with an ambitious plan; I would make video highlights of several exhibits (booths) to be presented to the *Related sites audience. I would try to make the vendors focus their pitch on the essential in order to produce a one to three minutes video per booth.
So far my experience with making videos was limited to family videos, so I knew I had lots of reading to do and lots of Youtube videos and tutorials to watch. Trade shows are...
Who else is going to Embedded World 2017 in Nuremberg?
These days I am particularly excited. In a little bit less than a month and a half, I will be travelling to Nuremberg in Germany to attend Embedded World, by far the biggest Embedded Systems trade show with over 1000 vendors displaying their products and services.
I have downloaded the Duolingo app and I'm trying to do a minimum of 30 minutes per day to learn some German. So far, I know that 'Frau' is a woman, 'Mann' is a man, 'Danke' is thank you and 'tschüss' is bye - still a...
New Comments System (please help me test it)
I thought it would take me a day or two to implement, it took almost two weeks...
But here it is, the new comments systems for blogs, heavily inspired by the forum system I developed earlier this year.
Which means that:
- You can easily add images, either by drag and drop or through the 'Insert Image' button
- You can add MathML, TeX and ASCIImath equations and they will be rendered with Mathjax
- You can add code snippets and they will be highlighted with highlights.js
- You can edit...
3 Good News
Good News #1Last week, I announced a new and ambitious reward program that will be funded by the new Vendors Directory.
This week, I am happy to announce that we have our firsts two sponsors! Quantum Leaps & Abelon Systems have agreed to pay the sponsorship fee to be listed in the new Vendors Directory. Because of their support, there is now some money in the reward pool ($1,000) and enough to pay for the firsts 500 'beers' awarded. Please...
The New Forum is LIVE!
After months of hard word, I am very excited to introduce to you the new forum interface.
Here are the key features:
1- Easily add images to a post by drag & dropping the images in the editor
2- Easily attach files to a post by drag & dropping the files in the editor
3- Add latex equations to a post and they will be rendered with Mathjax (tutorial)
4- Add a code snippet and surround the code with
ESC Boston's Videos are Now Up
In my last blog, I told you about my experience at ESC Boston and the few videos that I was planning to produce and publish. Here they are, please have a look and any feedback (positive or negative) is appreciated.
Short HighlightThis is a very short (one minute) montage of some of the footage that I shot at the show & conference. In future shows, I absolutely need to insert clips here and there of engineers saying a few words about the conference (why they...
3 Good News
Good News #1Last week, I announced a new and ambitious reward program that will be funded by the new Vendors Directory.
This week, I am happy to announce that we have our firsts two sponsors! Quantum Leaps & Abelon Systems have agreed to pay the sponsorship fee to be listed in the new Vendors Directory. Because of their support, there is now some money in the reward pool ($1,000) and enough to pay for the firsts 500 'beers' awarded. Please...
Embedded World 2018 - The Interviews
Once again this year, I had the chance to go to Embedded World in Nuremberg Germany. And once again this year, I brought my video equipment to try and capture some of the most interesting things at the show.
Something new this year, I asked Jacob Beningo if he would partner with me in doing interviews with a few vendors. I would operate the camera while Jacob would ask the right questions to the vendors to make them talk about the key products/features that...
Favorite Software AND Hardware Tools for Embedded Systems Development
Last year, at the Embedded Online Conference, we interviewed the speakers and asked them what were some of their favorite software and hardware tools for Embedded development.
We aggregated all their answers in one insightful video that you can watch here.
Although you should really watch the video in order to get the full picture, I've compiled the following non-exhaustive list for the fun of it (again, I cannot overstate enough how much valuable...
Launch of EmbeddedRelated.tv
With the upcoming Embedded Word just around the corner, I am very excited to launch the EmbeddedRelated.tv platform.
This is where you will find the schedule for all the live broadcasts that I will be doing from Embedded World next week. Please note that the schedule will be evolving constantly, even during the show, so I suggest your refresh the page often. For instance, I am still unsure if I will be able to do the 'opening of the doors' broadcast as...
Helping New Bloggers to Break the Ice: A New Ipad Pro for the Author with the Best Article!
Breaking the ice can be tough. Over the years, many individuals have asked to be given access to the blogging interface only to never post an article.
What to See at Embedded World 2023
Embedded World 2023 is just around the corner, and I am thrilled to be attending this year's edition in Nuremberg, Germany. The last time I was there was three years ago, and the world was on the cusp of a major pandemic. It was a surreal experience as many booths and exhibits were empty and cordoned off by security tape due to last-minute cancellations. It was clear that something big was happening.
But with more than 900 vendors exhibiting this year, I'm glad to see that Embedded...
2022 Embedded Online Conference - Final Push!
With the Embedded Online Conference only a couple of weeks away, we are now doing a final push to ensure that as many engineers as possible who could benefit from the conference are aware of it.
If you'd like to help us spread the word, not only will you make our day, but you'll also earn a chance to win one of TWO Saleae Logic Pro 8.
Prize: TWO Saleae Logic Pro 8Raffle...Announcing the 2021 Embedded Online Conference!
Once again this year, Jacob Beningo and I are putting together the Embedded Online Conference. Last year's edition was a very rewarding experience, with over 6,000 registrants, fantastic & insightful talks, and lots of positive feedback. For this year's edition, we are delighted to announce that none other than Jack Ganssle will be giving a Keynote presentation about the 50th anniversary of the Microprocessor.
The 2021 Embedded Online Conference will...
Free Embedded Systems Books
Following the success of the Collaborative Writing Experiment: What are your favorite Embedded Systems Online Resources? blog post, let's try a second collaborative writing experiment. This time, let's work on a file that will list the best embedded systems books that are available online for free. I am not talking about books that are illegally made available for download by pirates, but books that are made available online by authors and/or publishers.
Do you know of...
Favorite Software AND Hardware Tools for Embedded Systems Development
Last year, at the Embedded Online Conference, we interviewed the speakers and asked them what were some of their favorite software and hardware tools for Embedded development.
We aggregated all their answers in one insightful video that you can watch here.
Although you should really watch the video in order to get the full picture, I've compiled the following non-exhaustive list for the fun of it (again, I cannot overstate enough how much valuable...
Call for Bloggers!
Are you passionate about embedded systems? Do you have valuable insights, tips, or stories to share with the embedded community? Do you want to reach a large and engaged audience of embedded enthusiasts and professionals? We are currently looking at adding a few more inspired writers to our team of bloggers.
Announcing the 2021 Embedded Online Conference!
Once again this year, Jacob Beningo and I are putting together the Embedded Online Conference. Last year's edition was a very rewarding experience, with over 6,000 registrants, fantastic & insightful talks, and lots of positive feedback. For this year's edition, we are delighted to announce that none other than Jack Ganssle will be giving a Keynote presentation about the 50th anniversary of the Microprocessor.
The 2021 Embedded Online Conference will...
Collaborative Writing Experiment: What are your favorite Embedded Systems Online Resources?
Edit 22/05 - Wow, this went better than expected. I will try submitting this blog post to Reddit/ece and see if we can get a few more interesting links before I close the document. Thanks to everyone who contributed!
_______
Edit 28/05 - The document is now closed to editing. If there is a link that you would like to see added, please use the comment system at the end of this blog. Thanks to all who participated!
Up next, Free...
The New Forum is LIVE!
After months of hard word, I am very excited to introduce to you the new forum interface.
Here are the key features:
1- Easily add images to a post by drag & dropping the images in the editor
2- Easily attach files to a post by drag & dropping the files in the editor
3- Add latex equations to a post and they will be rendered with Mathjax (tutorial)
4- Add a code snippet and surround the code with
Get Involved: Contribute Quiz Questions for the Embedded Systems Community for a Chance to Win a LAP-C Pro!
Submit a Quiz Question for a chance to win a Zeroplus Lac-C Pro!
DSPRelated and EmbeddedRelated now on Facebook & I will be at EE Live!
I have two news to share with you today.
The first one is that I finally created Facebook pages for DSPRelated.com and EmbeddedRelated (DSPRelated page - EmbeddedRelated page). For a long time I didn't feel that this was something that was needed, but it seems that these days more and more people are using their Facebook account to stay updated with their favorite websites. In any event, if you have a Facebook account, I would greatly appreciate if you could use the next 5 seconds to "like"...
Back from Embedded World 2023
It was great to be back in Nuremberg for Embedded World after three long years. The trade show is probably the most significant event in the embedded systems industry, and it was a relief to see that it has survived the pandemic with more than 900 vendors exhibiting.
I recorded this video on the very first day when the doors opened. What you see in the video is probably 10% or less of the full show floor. I am always impressed by the size of...
Embedded Online Conference 2021 - Watch the Speakers Share their Thoughts on the Value for Attendees
Over the last few weeks, we've had a chance to chat with some of the speakers at the upcoming Embedded Online Conference. We asked them to share their thoughts on conferences and the Embedded Online Conference in particular. Here are their answers edited together in one video:
If you are not registered yet for the conference but are considering it, please make sure to use the promo code ER149 to save more than 40% on your registration...