Review: Embedded Software Design: A Practical Approach to Architecture, Processes, and Coding Techniques
Introduction
Full disclosure: I was given a copy of this book to review.
Embedded Software Design: A Practical Approach to Architecture, Processes, and Coding Techniques, by Jacob Beningo, is an excellent introduction to strategies for embedded systems design and bringing those designs to fruition. Renowned embedded systems expert Jack Ganssle was the technical reviewer.
This is a practical how-to book on the modern professional practice of embedded systems...
A Beginner's Guide to Embedded Systems
I was in my Junior year of college when I first learned about embedded systems. Sure, I’d heard about this mystical world of sensors and IoT, the same way I’d heard about thermonuclear astrophysics; But, the phrase “embedded systems” didn’t really mean anything to me. This, here, is a guide for people like teenage me. We’re going to learn what an embedded system actually is, and why working on embedded software is the coolest thing you could ever do!
What's an embedded...Five ‘80s Movies that Inspired Me to Become an Engineer
Five ‘80s Movies that Inspired Me to Become an Engineer
Movies and pop culture can incredibly impact society, particularly children. However, we never really know what conversation, demonstration, or movie could inspire someone to become an engineer. Recently in the Beningo house, we ran out of the film to watch for movie night. In desperation, I decided to find great movies from my childhood in the 80s. To my surprise, I realized how influential several of these films inspired me to...
Learning A New Microcontroller
Contents:- Introduction
- The Peripherals
- System Complexity
- Support Software
- Do It Like Phil
- The Programs
- WET And DRY Code
Review: Modern Software Engineering
This is actually a review of 3 books by Dave Farley, because they really form a set:
- Modern Software Engineering: Doing What Works to Build Better Software Faster (just released for 2022, 224 pages)
- Continuous Delivery: Reliable Software Releases through Build, Test, and Deployment Automation (co-authored with Jez Humble, 2011, 463 pages)
- Continuous Delivery Pipelines: How To Build Better Software Faster (2021,...
VolksEEG: Rust Development On Adafruit nRF52840 Feather Express
Contents:Learning Rust For Embedded Systems
The Motivational PortionBased on recommendations from Kevin Nause, the VolksEEG project is considering using Rust as the embedded system programming language. So I've been off on a tear skimming books and e-books and watching videos at 2x to evaluate it.
My conclusion? Do it!
Most of the rest of us participants are primarily C/C++ embedded developers. I had previously been sensitized to Rust for embedded systems by
Learning Rust For Embedded Systems
The Motivational PortionBased on recommendations from Kevin Nause, the VolksEEG project is considering using Rust as the embedded system programming language. So I've been off on a tear skimming books and e-books and watching videos at 2x to evaluate it.
My conclusion? Do it!
Most of the rest of us participants are primarily C/C++ embedded developers. I had previously been sensitized to Rust for embedded systems by
C to C++: Templates and Generics – Supercharging Type Flexibility
"C to C++: Templates and Generics – Supercharging Type Flexibility" illuminates the rigidity of C when managing multiple types and the confusion of code replication or macro complexity. In contrast, C++ offers templates, acting as type-agnostic blueprints for classes and functions, which allows for the creation of versatile and reusable code without redundancy. By using templates, developers can define operations like add once and apply them to any data type, simplifying codebases significantly. Generics further this concept, enabling a single code structure to handle diverse data types efficiently—a boon for embedded systems where operations must be performed on varying data, yet code efficiency is critical due to resource limitations. The blog walks through practical applications, showcasing how templates streamline processes and ensure type safety with static_assert, all while weighing the pros and cons of their use in embedded software, advocating for careful practice to harness their full potential.
Jumping from MCUs to FPGAs - 5 things you need to know
Are you a microcontroller expert beckoned by the siren song of the FPGA? Not long ago, that was me. FPGA-expert friends of mine regularly extolled the virtues of these mysterious components and I wanted in. When I made the leap, I found a world seemingly very familiar, but in reality, vastly different. I found that my years of C programming and microcontroller use often gave pre preconceived interpretations of FPGA resource material which resulted in eye-roll class mistakes in my code. I’ve gleaned five things of vital importance to help you make that transition faster than I did.
Examining The Stack For Fun And Profit
Well, maybe not so much for profit, but certainly for fun. This is a wandering journey of exploration and discovery, learning a variety of interesting and useful things.
One of the concerns with an embedded system is how much memory it needs, known as the memory footprint. This consists of the persistent storage needed for the program (i.e. the flash memory or filesystem space that stores the executable image), and the volatile storage needed to hold the data while executing over long...
Levitating Globe Teardown, Part 2
Part 1 of this article was really more of an extended (and cynical) product review. In this part of the article, I actually take things apart (sometimes a bit more suddenly than I meant to) and show you some innards.First the globe. I knew there was a magnet in there someplace, because it's obviously plastic and it also attracts metal. I had intended to gently part the globe at the glue bond along the equator. I started by trying to gently flex the thing on my work...
Bit-Banged Async Serial Output And Disciplined Engineering
This post covers implementing asynchronous serial output directly on a GPIO with bit-banging. This can be a valuable debug tool for getting information out of a system. It also covers disciplined engineering, using the bit-banging module as an example and template you can apply to other projects.
Embedded Developers, Ditch Your IDEs – Here’s Why!
Ditching your Integrated Development Environment (IDE) temporarily can be a transformative learning experience in embedded development. This post invites you to explore the underpinnings of IDEs by delving into alternative tools and processes like Makefile, CMake, Vim, GDB, and OpenOCD. Understanding these tools can demystify the background operations of IDEs, revealing the intricacies of compiling, linking, and debugging. This journey into the “under the hood” aspects of development is not just about learning new tools, but also about gaining a deeper appreciation for the convenience and efficiency that IDEs provide. By stepping out of your comfort zone and experimenting with these alternatives, you can sharpen your skills, enhance your knowledge, and possibly discover a more tailored and streamlined development experience. Whether you're a novice or a seasoned developer, this exploration promises insights and revelations that can elevate your embedded development journey.
UML Statechart tip: Handling errors when entering a state
This is my second post with advice and tips on designing software with UML statecharts. My first entry is here.
It has been nearly 20 years since I first studied UML statecharts. Since that initial exposure (thank you Samek!), I have applied event driven active object statechart designs to numerous projects [3]. Nothing has abated my preference for this pattern in my firmware and embedded software projects. Through the years I have taken note of a handful of common challenges when...
A Beginner's Guide to Embedded Systems
I was in my Junior year of college when I first learned about embedded systems. Sure, I’d heard about this mystical world of sensors and IoT, the same way I’d heard about thermonuclear astrophysics; But, the phrase “embedded systems” didn’t really mean anything to me. This, here, is a guide for people like teenage me. We’re going to learn what an embedded system actually is, and why working on embedded software is the coolest thing you could ever do!
What's an embedded...Examining The Stack For Fun And Profit
Well, maybe not so much for profit, but certainly for fun. This is a wandering journey of exploration and discovery, learning a variety of interesting and useful things.
One of the concerns with an embedded system is how much memory it needs, known as the memory footprint. This consists of the persistent storage needed for the program (i.e. the flash memory or filesystem space that stores the executable image), and the volatile storage needed to hold the data while executing over long...
Review: Hands-On RTOS with Microcontrollers
Full disclosure: I was given a free copy of this book for evaluation.
Hands-On RTOS with Microcontrollers: Building real-time embedded systems using FreeRTOS, STM32 MCUs, and SEGGER debug tools by Brian Amos is an outstanding book. It lives up to its name, extremely hands-on and practical, taking you from knowing nothing about RTOS's (Real-Time Operating Systems) up to building real multithreaded embedded system applications running on real hardware.
It uses the ST Micro
Learning A New Microcontroller
Contents:- Introduction
- The Peripherals
- System Complexity
- Support Software
- Do It Like Phil
- The Programs
- WET And DRY Code
Tenderfoot: Embedded Software and Firmware Specialties
Once upon a time (seven years ago) I answered a question on Stack Overflow. Then Stephane suggested I turn that answer into a blog post. Great idea! This post dives deeper into the original question: “Is it possible to fragment this field (embedded software and firmware) into sub-fields?”
This post represents a detailed and updated response to my original Stack Overflow answer. I hope this post provides guidance and useful information to the “tenderfoots” in the...
UML Statechart tip: Handling errors when entering a state
This is my second post with advice and tips on designing software with UML statecharts. My first entry is here.
It has been nearly 20 years since I first studied UML statecharts. Since that initial exposure (thank you Samek!), I have applied event driven active object statechart designs to numerous projects [3]. Nothing has abated my preference for this pattern in my firmware and embedded software projects. Through the years I have taken note of a handful of common challenges when...
Bit-Banged Async Serial Output And Disciplined Engineering
This post covers implementing asynchronous serial output directly on a GPIO with bit-banging. This can be a valuable debug tool for getting information out of a system. It also covers disciplined engineering, using the bit-banging module as an example and template you can apply to other projects.
Tenderfoot: Recommended Reading
Twenty years ago I read Code Complete by Steve McConnell. And then read it again. And again. And again. Of all the books I have read during my career, I believe this was the book that catapulted me from a young electrical engineer to a young and aspiring embedded software engineer. So to all the ‘tenderfoots’ embarking upon an embedded systems and especially embedded software and firmware career, this entry is for you.
First, I would certainly recommend that all engineers read and read...
Embedded Systems - free EdX course by UT-Austin!
I was very excited to see that there will be an Embedded Systems class available for free at https://www.edx.org/course/utaustin/ut-6-01x/embedded-systems-shape-world/1172
It's free to sign up and take the online class at the EdX website.
More exciting is that the class is based on a TI Launchpad Tiva microcontroller development board. The Tiva Launchpad features an 80-MHz ARM Cortex M-4 MCU with 256 KB of flash storage, 32 KB of RAM and 43 general purpose I/O pins.
C++ on microcontrollers 3 – a first shot at an hc595 class with 8 output pins
This blog series is about the use of C++ for modern microcontrollers. My plan is to show the gradual development of a basic I/O library. I will introduce the object-oriented C++ features that are used step by step, to provide a gentle yet practical introduction into C++ for C programmers. Reader input is very much appreciated, you might even steer me in the direction you find most interesting.
In the first part of...
C to C++: Templates and Generics – Supercharging Type Flexibility
"C to C++: Templates and Generics – Supercharging Type Flexibility" illuminates the rigidity of C when managing multiple types and the confusion of code replication or macro complexity. In contrast, C++ offers templates, acting as type-agnostic blueprints for classes and functions, which allows for the creation of versatile and reusable code without redundancy. By using templates, developers can define operations like add once and apply them to any data type, simplifying codebases significantly. Generics further this concept, enabling a single code structure to handle diverse data types efficiently—a boon for embedded systems where operations must be performed on varying data, yet code efficiency is critical due to resource limitations. The blog walks through practical applications, showcasing how templates streamline processes and ensure type safety with static_assert, all while weighing the pros and cons of their use in embedded software, advocating for careful practice to harness their full potential.
