|
Hi all. I have a problem with LPC2292/2294 device, please help me.I made system with LPC2294/2292 Philips processor.System contains CPU, 24MHz, xtal, two capacitors, JTAG EI012 interface, decouple capacitors for all supply pins(100nF) and supply devices(LM2941S, LP3961). When I connect system to PC, all well works, but LPC2292 and LPC2294 give me same ID code 0x9FF0F0F.I works with JTAG-tools. http://sourceforge.net/projects/jtagtools Next I changed supply device(high operating temperature of voltage regulator LP3961), something I must did wrong, becouse nothing works, oscilator did not work too. I changed CPU, JTAG not works.Oscilator work on 24MHz frequency, voltage on xtal is 1.515V, U3.3=3.26 V, U1.8=1.8V, power consumation is 20mA. First function prototype consumation about 200mA power. All pins and peripherials I check, all is OK. I don't have idea, what is worng. Tell me please any idea, how I find what is wrong. Thanks for all advices. BTW: I did not check system via ISP features, I must do it. http://www.geocities.com/kralikbo |
|
|
LPC2294/LPC2292, JTAG and any Hardware problem
Started by ●October 5, 2004
Reply by ●October 6, 20042004-10-06
|
Now I make ISP communication and it works well. Device ID is 50462403, BootLoader ID:1.6, I using LPC2000 Flash Utility V2.1.0. I don't understand where is problem with JTAG. Please, do you know anybody where I download BSDL file for LPC2292/ LPC2294 processors ? BY --- In , "kralikbo" <kralikbo@y...> wrote: > > Hi all. > I have a problem with LPC2292/2294 device, please help me.I made > system with LPC2294/2292 Philips processor.System contains CPU, > 24MHz, > xtal, two capacitors, JTAG EI012 interface, decouple capacitors for > all supply pins(100nF) and supply devices(LM2941S, LP3961). When I > connect system to PC, all well works, but LPC2292 and LPC2294 give me > same ID code 0x9FF0F0F.I works with JTAG-tools. > http://sourceforge.net/projects/jtagtools > > Next I changed supply device(high operating temperature of voltage > regulator LP3961), something I > must did wrong, becouse nothing works, oscilator did not work too. I > changed CPU, JTAG not works.Oscilator work on 24MHz frequency, > voltage > on xtal is 1.515V, U3.3=3.26 V, U1.8=1.8V, power consumation is 20mA. > First function prototype consumation about 200mA power. All pins and > peripherials I check, all is OK. I don't have idea, what is worng. > Tell me please any idea, how I find what is wrong. Thanks for all > advices. > > BTW: I did not check system via ISP features, I must do it. > > http://www.geocities.com/kralikbo |
