Hello,
I am new to this controller.
Can anybody suggest which tool chain to select for AT91SAM7S256 with which its
easy to start with that is set of IDE+Compiler+Debugger.
I need .a79 as my output file extention.??
thank you,
AT91SAM7S256...
Started by ●March 3, 2011
Reply by ●March 4, 20112011-03-04
Hello,Rushikesh
Im begginer on ARM too.
but im using KEIL Compiler for it you can find it on :www.keil.com
its so easy.
for programming you can use directly connect controller to pc usb and use samba software. it is very simple not need any external device.
for see its example you can download it from atmel website:
http://www.atmel.com/dyn/products/product_apps.asp?category_id3&family_id`5&subfamily_id86&part_id524
i try to search the example for you , cant find it .you can try to this page
please let me if you have any question .
Have nice time
Amir Zendehdel
--- In A..., "rushikesh" wrote:
>
> Hello,
>
> I am new to this controller.
>
> Can anybody suggest which tool chain to select for AT91SAM7S256 with which its easy to start with that is set of IDE+Compiler+Debugger.
>
> I need .a79 as my output file extention.??
> thank you,
>
Im begginer on ARM too.
but im using KEIL Compiler for it you can find it on :www.keil.com
its so easy.
for programming you can use directly connect controller to pc usb and use samba software. it is very simple not need any external device.
for see its example you can download it from atmel website:
http://www.atmel.com/dyn/products/product_apps.asp?category_id3&family_id`5&subfamily_id86&part_id524
i try to search the example for you , cant find it .you can try to this page
please let me if you have any question .
Have nice time
Amir Zendehdel
--- In A..., "rushikesh" wrote:
>
> Hello,
>
> I am new to this controller.
>
> Can anybody suggest which tool chain to select for AT91SAM7S256 with which its easy to start with that is set of IDE+Compiler+Debugger.
>
> I need .a79 as my output file extention.??
> thank you,
>
Reply by ●March 6, 20112011-03-06
Thanks Amir for reply.
while using keil i think we can't give output file extension.
i need out file with .a79 extension.
Regards,
Rushikesh Koshti
+919561546564
--- On Fri, 4/3/11, amir wrote:
From: amir
Subject: [AT91SAM] Re: AT91SAM7S256...
To: A...
Date: Friday, 4 March, 2011, 12:20 PM
Hello,Rushikesh
Im begginer on ARM too.
but im using KEIL Compiler for it you can find it on :www.keil.com
its so easy.
for programming you can use directly connect controller to pc usb and use samba software. it is very simple not need any external device.
for see its example you can download it from atmel website:
http://www.atmel.com/dyn/products/product_apps.asp?category_id3&family_id`5&subfamily_id86&part_id524
i try to search the example for you , cant find it .you can try to this page
please let me if you have any question .
Have nice time
Amir Zendehdel
--- In A..., "rushikesh" wrote:
>
> Hello,
>
> I am new to this controller.
>
> Can anybody suggest which tool chain to select for AT91SAM7S256 with which its easy to start with that is set of IDE+Compiler+Debugger.
>
> I need .a79 as my output file extention.??
>
>
> thank you,
>
while using keil i think we can't give output file extension.
i need out file with .a79 extension.
Regards,
Rushikesh Koshti
+919561546564
--- On Fri, 4/3/11, amir wrote:
From: amir
Subject: [AT91SAM] Re: AT91SAM7S256...
To: A...
Date: Friday, 4 March, 2011, 12:20 PM
Hello,Rushikesh
Im begginer on ARM too.
but im using KEIL Compiler for it you can find it on :www.keil.com
its so easy.
for programming you can use directly connect controller to pc usb and use samba software. it is very simple not need any external device.
for see its example you can download it from atmel website:
http://www.atmel.com/dyn/products/product_apps.asp?category_id3&family_id`5&subfamily_id86&part_id524
i try to search the example for you , cant find it .you can try to this page
please let me if you have any question .
Have nice time
Amir Zendehdel
--- In A..., "rushikesh" wrote:
>
> Hello,
>
> I am new to this controller.
>
> Can anybody suggest which tool chain to select for AT91SAM7S256 with which its easy to start with that is set of IDE+Compiler+Debugger.
>
> I need .a79 as my output file extention.??
>
>
> thank you,
>
Reply by ●March 6, 20112011-03-06
Hi,Rushikesh
Can i ask you" why you need .a79 file?"
Regard
Amir Zendehdel,Iran
--- In A..., rushikesh koshti wrote:
>
> Thanks Amir for reply.
>
> while using keil i think we can't give output file extension.
>
> i need out file with .a79 extension.
>
> Regards,
>
> Rushikesh Koshti
>
> +919561546564
>
> --- On Fri, 4/3/11, amir wrote:
>
> From: amir
> Subject: [AT91SAM] Re: AT91SAM7S256...
> To: A...
> Date: Friday, 4 March, 2011, 12:20 PM
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> Hello,Rushikesh
>
> Im begginer on ARM too.
>
> but im using KEIL Compiler for it you can find it on :www.keil.com
>
> its so easy.
>
> for programming you can use directly connect controller to pc usb and use samba software. it is very simple not need any external device.
>
> for see its example you can download it from atmel website:
>
> http://www.atmel.com/dyn/products/product_apps.asp?category_id=163&family_id=605&subfamily_id=1586&part_id=3524
>
> i try to search the example for you , cant find it .you can try to this page
>
>
>
> please let me if you have any question .
>
> Have nice time
>
> Amir Zendehdel
>
>
>
> --- In A..., "rushikesh" wrote:
>
> >
>
> > Hello,
>
> >
>
> > I am new to this controller.
>
> >
>
> > Can anybody suggest which tool chain to select for AT91SAM7S256 with which its easy to start with that is set of IDE+Compiler+Debugger.
>
> >
>
> > I need .a79 as my output file extention.??
>
> >
>
> >
>
> > thank you,
>
>
Can i ask you" why you need .a79 file?"
Regard
Amir Zendehdel,Iran
--- In A..., rushikesh koshti wrote:
>
> Thanks Amir for reply.
>
> while using keil i think we can't give output file extension.
>
> i need out file with .a79 extension.
>
> Regards,
>
> Rushikesh Koshti
>
> +919561546564
>
> --- On Fri, 4/3/11, amir wrote:
>
> From: amir
> Subject: [AT91SAM] Re: AT91SAM7S256...
> To: A...
> Date: Friday, 4 March, 2011, 12:20 PM
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> Hello,Rushikesh
>
> Im begginer on ARM too.
>
> but im using KEIL Compiler for it you can find it on :www.keil.com
>
> its so easy.
>
> for programming you can use directly connect controller to pc usb and use samba software. it is very simple not need any external device.
>
> for see its example you can download it from atmel website:
>
> http://www.atmel.com/dyn/products/product_apps.asp?category_id=163&family_id=605&subfamily_id=1586&part_id=3524
>
> i try to search the example for you , cant find it .you can try to this page
>
>
>
> please let me if you have any question .
>
> Have nice time
>
> Amir Zendehdel
>
>
>
> --- In A..., "rushikesh" wrote:
>
> >
>
> > Hello,
>
> >
>
> > I am new to this controller.
>
> >
>
> > Can anybody suggest which tool chain to select for AT91SAM7S256 with which its easy to start with that is set of IDE+Compiler+Debugger.
>
> >
>
> > I need .a79 as my output file extention.??
>
> >
>
> >
>
> > thank you,
>
>