(@faiz1303)
Hi mr_bandit,Now, firstly I had created the text file in sdcard. I had copied all the hex bytes having the information as removable disk name, file name and...
Thanks mr_bandit,Sorry for the incomplete information, I am using a FAT32 file system. It is a normal bare metal code tested on windows(RAM as MSD). Sd card and...
Hi,I am trying to read the sdcard which is connected to the spi port of arm lpc2388 as a mass storage device, I had run the USBMem (RAM) code Keil on my OLIMEX board and...
Thanks Kocsonya,Sorry for posting a insufficient information, I first try to do as you have suggested, I am having a problem, when I use a SD card with SSP0, but...
Thanks mr_bandit,I didn't get any thing working, I thought that the problem is in SSP initialization. Please tell me, what if I initialize the SD CARD read and...
Hi,Hi,I am working on a project, in which I want to copy a data from SD card (on SSP0) to a USB flash drive, I want to reduce the time span required to copy data...
Thanks mr_banditBut it seems difficult to resolve the problem through the hardware, only option is to feed a different capacitance combination across the crystal,...
Thanks mr_bandit,I tried to contact NXP, no response yet, I think instead of 32768Hz I am getting a 32766.86 I'll try to measure the oscillator frequency on scope...
HI WaltxMain board is powered by 12V, controller is operating at 3.3V, back up battery is of 3V. I have a doubt, can we get exact 32768 tick from the crystal, or...
Hello mr_bandit,We have design our own custom board for voice logger and I have gone through the errata for LPC2388, only two issue related to VBat are mention,...
Hi,ARM LPC2388 has a inbuild RTC,I am using an external crystal of 32,768 Hz with capacitor of 10pf, RTC is powered by a 3V battery which is new one. Today...
Use this form to contact faiz1303
Before you can contact a member of the *Related Sites:
- You must be logged in (register here)
- You must confirm you email address
