eZ430-RF2500 UART
Started by ●November 14, 2007
Has anyone tried using the UART for communication with a PC through the USB
interface? How does that work? With the ez430-F2013 module, the UART is not
really a UART, the debugger grabs the data and displays it in the debugger
terminal window. I'm assuming that the RF2500 UART relies on a USB to
serial type of Windows driver to pass the serial data into a PC. I wonder why
TI decided to make this function available for the RF module, but not for the
regular MCU module. It would be nice to have a serial port available which
didn't require a debugging session.
Reply by ●November 15, 20072007-11-15
i have a ez430-rf. the serial interface works nice. the problem is only the
vista do not really recognize it programmer only the sireal interface.
----- Ursprüngliche Mail ----
Von: Aaron Greer
An: msp430
Gesendet: Mittwoch, den 14. November 2007, 20:01:24 Uhr
Betreff: [msp430] eZ430-RF2500 UART
Has anyone tried using the UART for communication with a PC through the USB interface? How does that work? With the ez430-F2013 module, the UART is not really a UART, the debugger grabs the data and displays it in the debugger terminal window. I'm assuming that the RF2500 UART relies on a USB to serial type of Windows driver to pass the serial data into a PC. I wonder why TI decided to make this function available for the RF module, but not for the regular MCU module. It would be nice to have a serial port available which didn't require a debugging session.
Jetzt Mails schnell in einem Vorschaufenster überfliegen. Dies und viel mehr bietet das neue Yahoo! Mail - www.yahoo.de/mail
----- Ursprüngliche Mail ----
Von: Aaron Greer
An: msp430
Gesendet: Mittwoch, den 14. November 2007, 20:01:24 Uhr
Betreff: [msp430] eZ430-RF2500 UART
Has anyone tried using the UART for communication with a PC through the USB interface? How does that work? With the ez430-F2013 module, the UART is not really a UART, the debugger grabs the data and displays it in the debugger terminal window. I'm assuming that the RF2500 UART relies on a USB to serial type of Windows driver to pass the serial data into a PC. I wonder why TI decided to make this function available for the RF module, but not for the regular MCU module. It would be nice to have a serial port available which didn't require a debugging session.
Jetzt Mails schnell in einem Vorschaufenster überfliegen. Dies und viel mehr bietet das neue Yahoo! Mail - www.yahoo.de/mail
Reply by ●November 16, 20072007-11-16
What I found works is use an EZ-430 programmer (blue) with the RF2500 devise
(red)plugged into it. Use the center 4 pins to match up with the 4 pin socket
on the ez430 kit.
Dan
----- Original Message ----
From: Anton Gorbunov
To: m...
Sent: Thursday, November 15, 2007 4:06:12 PM
Subject: AW: [msp430] eZ430-RF2500 UART
i have a ez430-rf. the serial interface works nice. the problem is only the vista do not really recognize it programmer only the sireal interface.
----- Ursprgliche Mail ----
Von: Aaron Greer
An: msp430
Gesendet: Mittwoch, den 14. November 2007, 20:01:24 Uhr
Betreff: [msp430] eZ430-RF2500 UART
Has anyone tried using the UART for communication with a PC through the USB interface? How does that work? With the ez430-F2013 module, the UART is not really a UART, the debugger grabs the data and displays it in the debugger terminal window. I'm assuming that the RF2500 UART relies on a USB to serial type of Windows driver to pass the serial data into a PC.. I wonder why TI decided to make this function available for the RF module, but not for the regular MCU module. It would be nice to have a serial port available which didn't require a debugging session.
Jetzt Mails schnell in einem Vorschaufenster erfliegen. Dies und viel mehr bietet das neue Yahoo! Mail - www.yahoo.de/ mail
____________________________________________________________________________________
Never miss a thing. Make Yahoo your home page.
http://www.yahoo.com/r/hs
Dan
----- Original Message ----
From: Anton Gorbunov
To: m...
Sent: Thursday, November 15, 2007 4:06:12 PM
Subject: AW: [msp430] eZ430-RF2500 UART
i have a ez430-rf. the serial interface works nice. the problem is only the vista do not really recognize it programmer only the sireal interface.
----- Ursprgliche Mail ----
Von: Aaron Greer
An: msp430
Gesendet: Mittwoch, den 14. November 2007, 20:01:24 Uhr
Betreff: [msp430] eZ430-RF2500 UART
Has anyone tried using the UART for communication with a PC through the USB interface? How does that work? With the ez430-F2013 module, the UART is not really a UART, the debugger grabs the data and displays it in the debugger terminal window. I'm assuming that the RF2500 UART relies on a USB to serial type of Windows driver to pass the serial data into a PC.. I wonder why TI decided to make this function available for the RF module, but not for the regular MCU module. It would be nice to have a serial port available which didn't require a debugging session.
Jetzt Mails schnell in einem Vorschaufenster erfliegen. Dies und viel mehr bietet das neue Yahoo! Mail - www.yahoo.de/ mail
____________________________________________________________________________________
Never miss a thing. Make Yahoo your home page.
http://www.yahoo.com/r/hs
Reply by ●November 16, 20072007-11-16
Dan, are you describing a way to program the RF2500 module with Vista?
----- "Dan Larson" wrote:
> What I found works is use an EZ-430 programmer (blue) with the RF2500
> devise (red)plugged into it. Use the center 4 pins to match up with
> the 4 pin socket on the ez430 kit.
>
> Dan
>
> ----- Original Message ----
> From: Anton Gorbunov < r...@yahoo.de >
> To: m...
> Sent: Thursday, November 15, 2007 4:06:12 PM
> Subject: AW: [msp430] eZ430-RF2500 UART
>
> i have a ez430-rf. the serial interface works nice. the problem is
> only the vista do not really recognize it programmer only the sireal
> interface.
>
> ----- Ursprüngliche Mail ----
>
> Von: Aaron Greer
>
> An: msp430
>
> Gesendet: Mittwoch, den 14. November 2007 , 20:01:24 Uhr
>
> Betreff: [msp430] eZ430-RF2500 UART
>
> Has anyone tried using the UART for communication with a PC through
> the USB interface? How does that work? With the ez430-F2013 module,
> the UART is not really a UART, the debugger grabs the data and
> displays it in the debugger terminal window. I'm assuming that the
> RF2500 UART relies on a USB to serial type of Windows driver to pass
> the serial data into a PC.. I wonder why TI decided to make this
> function available for the RF module, but not for the regular MCU
> module. It would be nice to have a serial port available which didn't
> require a debugging session.
>
>
>
>
>
>
>
> Jetzt Mails schnell in einem Vorschaufenster überfliegen. Dies und
> viel mehr bietet das neue Yahoo! Mail - www.yahoo.de/ mail
>
>
>
>
>
>
>
>
>
> __________________________________________________________
> Never miss a thing. Make Yahoo your home page.
> http://www.yahoo.com/r/hs
>
>
>
>
----- "Dan Larson" wrote:
> What I found works is use an EZ-430 programmer (blue) with the RF2500
> devise (red)plugged into it. Use the center 4 pins to match up with
> the 4 pin socket on the ez430 kit.
>
> Dan
>
> ----- Original Message ----
> From: Anton Gorbunov < r...@yahoo.de >
> To: m...
> Sent: Thursday, November 15, 2007 4:06:12 PM
> Subject: AW: [msp430] eZ430-RF2500 UART
>
> i have a ez430-rf. the serial interface works nice. the problem is
> only the vista do not really recognize it programmer only the sireal
> interface.
>
> ----- Ursprüngliche Mail ----
>
> Von: Aaron Greer
>
> An: msp430
>
> Gesendet: Mittwoch, den 14. November 2007 , 20:01:24 Uhr
>
> Betreff: [msp430] eZ430-RF2500 UART
>
> Has anyone tried using the UART for communication with a PC through
> the USB interface? How does that work? With the ez430-F2013 module,
> the UART is not really a UART, the debugger grabs the data and
> displays it in the debugger terminal window. I'm assuming that the
> RF2500 UART relies on a USB to serial type of Windows driver to pass
> the serial data into a PC.. I wonder why TI decided to make this
> function available for the RF module, but not for the regular MCU
> module. It would be nice to have a serial port available which didn't
> require a debugging session.
>
>
>
>
>
>
>
> Jetzt Mails schnell in einem Vorschaufenster überfliegen. Dies und
> viel mehr bietet das neue Yahoo! Mail - www.yahoo.de/ mail
>
>
>
>
>
>
>
>
>
> __________________________________________________________
> Never miss a thing. Make Yahoo your home page.
> http://www.yahoo.com/r/hs
>
>
>
>
Reply by ●November 16, 20072007-11-16
Yes it is possible to program the ez430-rf with the ez430 "dongel".
----- Ursprüngliche Mail ----
Von: Aaron Greer
An: m...
Gesendet: Freitag, den 16. November 2007, 21:52:53 Uhr
Betreff: Re: AW: [msp430] eZ430-RF2500 UART
Dan, are you describing a way to program the RF2500 module with Vista?
----- "Dan Larson" wrote:
> What I found works is use an EZ-430 programmer (blue) with the RF2500
> devise (red)plugged into it. Use the center 4 pins to match up with
> the 4 pin socket on the ez430 kit.
>
> Dan
>
> ----- Original Message ----
> From: Anton Gorbunov < rad_junki@yahoo. de >
> To: msp430@yahoogroups. com
> Sent: Thursday, November 15, 2007 4:06:12 PM
> Subject: AW: [msp430] eZ430-RF2500 UART
>
> i have a ez430-rf. the serial interface works nice. the problem is
> only the vista do not really recognize it programmer only the sireal
> interface.
>
> ----- Ursprüngliche Mail ----
>
> Von: Aaron Greer
>
> An: msp430
>
> Gesendet: Mittwoch, den 14. November 2007 , 20:01:24 Uhr
>
> Betreff: [msp430] eZ430-RF2500 UART
>
> Has anyone tried using the UART for communication with a PC through
> the USB interface? How does that work? With the ez430-F2013 module,
> the UART is not really a UART, the debugger grabs the data and
> displays it in the debugger terminal window. I'm assuming that the
> RF2500 UART relies on a USB to serial type of Windows driver to pass
> the serial data into a PC.. I wonder why TI decided to make this
> function available for the RF module, but not for the regular MCU
> module. It would be nice to have a serial port available which didn't
> require a debugging session.
>
>
>
>
>
>
>
> Jetzt Mails schnell in einem Vorschaufenster überfliegen. Dies und
> viel mehr bietet das neue Yahoo! Mail - www.yahoo.de/ mail
>
>
>
>
>
>
>
>
>
> ____________ _________ _________ _________ _________ _________ _
> Never miss a thing. Make Yahoo your home page.
> http://www.yahoo. com/r/hs
>
>
>
>
__________________________________ Ihr erstes Baby? Holen Sie sich Tipps von anderen Eltern. www.yahoo.de/clever
----- Ursprüngliche Mail ----
Von: Aaron Greer
An: m...
Gesendet: Freitag, den 16. November 2007, 21:52:53 Uhr
Betreff: Re: AW: [msp430] eZ430-RF2500 UART
Dan, are you describing a way to program the RF2500 module with Vista?
----- "Dan Larson" wrote:
> What I found works is use an EZ-430 programmer (blue) with the RF2500
> devise (red)plugged into it. Use the center 4 pins to match up with
> the 4 pin socket on the ez430 kit.
>
> Dan
>
> ----- Original Message ----
> From: Anton Gorbunov < rad_junki@yahoo. de >
> To: msp430@yahoogroups. com
> Sent: Thursday, November 15, 2007 4:06:12 PM
> Subject: AW: [msp430] eZ430-RF2500 UART
>
> i have a ez430-rf. the serial interface works nice. the problem is
> only the vista do not really recognize it programmer only the sireal
> interface.
>
> ----- Ursprüngliche Mail ----
>
> Von: Aaron Greer
>
> An: msp430
>
> Gesendet: Mittwoch, den 14. November 2007 , 20:01:24 Uhr
>
> Betreff: [msp430] eZ430-RF2500 UART
>
> Has anyone tried using the UART for communication with a PC through
> the USB interface? How does that work? With the ez430-F2013 module,
> the UART is not really a UART, the debugger grabs the data and
> displays it in the debugger terminal window. I'm assuming that the
> RF2500 UART relies on a USB to serial type of Windows driver to pass
> the serial data into a PC.. I wonder why TI decided to make this
> function available for the RF module, but not for the regular MCU
> module. It would be nice to have a serial port available which didn't
> require a debugging session.
>
>
>
>
>
>
>
> Jetzt Mails schnell in einem Vorschaufenster überfliegen. Dies und
> viel mehr bietet das neue Yahoo! Mail - www.yahoo.de/ mail
>
>
>
>
>
>
>
>
>
> ____________ _________ _________ _________ _________ _________ _
> Never miss a thing. Make Yahoo your home page.
> http://www.yahoo. com/r/hs
>
>
>
>
__________________________________ Ihr erstes Baby? Holen Sie sich Tipps von anderen Eltern. www.yahoo.de/clever
Reply by ●November 17, 20072007-11-17
yes as long as you can use the ez430 (blue) kit to program with vista, then you
can use the usb portion to program the RF2500 (red).
----- Original Message ----
From: Anton Gorbunov
To: m...
Sent: Friday, November 16, 2007 6:54:13 PM
Subject: AW: AW: [msp430] eZ430-RF2500 UART
Yes it is possible to program the ez430-rf with the ez430 "dongel".
----- Ursprgliche Mail ----
Von: Aaron Greer
An: msp430@yahoogroups. com
Gesendet: Freitag, den 16. November 2007, 21:52:53 Uhr
Betreff: Re: AW: [msp430] eZ430-RF2500 UART
Dan, are you describing a way to program the RF2500 module with Vista?
----- "Dan Larson" wrote:
> What I found works is use an EZ-430 programmer (blue) with the RF2500
> devise (red)plugged into it. Use the center 4 pins to match up with
> the 4 pin socket on the ez430 kit.
>
> Dan
>
> ----- Original Message ----
> From: Anton Gorbunov < rad_junki@yahoo. de >
> To: msp430@yahoogroups. com
> Sent: Thursday, November 15, 2007 4:06:12 PM
> Subject: AW: [msp430] eZ430-RF2500 UART
>
> i have a ez430-rf. the serial interface works nice. the problem is
> only the vista do not really recognize it programmer only the sireal
> interface.
>
> ----- Ursprgliche Mail ----
>
> Von: Aaron Greer
>
> An: msp430
>
> Gesendet: Mittwoch, den 14. November 2007 , 20:01:24 Uhr
>
> Betreff: [msp430] eZ430-RF2500 UART
>
> Has anyone tried using the UART for communication with a PC through
> the USB interface? How does that work? With the ez430-F2013 module,
> the UART is not really a UART, the debugger grabs the data and
> displays it in the debugger terminal window. I'm assuming that the
> RF2500 UART relies on a USB to serial type of Windows driver to pass
> the serial data into a PC.. I wonder why TI decided to make this
> function available for the RF module, but not for the regular MCU
> module. It would be nice to have a serial port available which didn't
> require a debugging session.
>
>
>
>
>
>
>
> Jetzt Mails schnell in einem Vorschaufenster erfliegen. Dies und
> viel mehr bietet das neue Yahoo! Mail - www.yahoo.de/ mail
>
>
>
>
>
>
>
>
>
> ____________ _________ _________ _________ _________ _________ _
> Never miss a thing. Make Yahoo your home page.
> http://www.yahoo. com/r/hs
>
>
>
>
____________ _________ _________ ____ Ihr erstes Baby? Holen Sie sich Tipps von anderen Eltern. www.yahoo.de/ clever
____________________________________________________________________________________
Be a better pen pal.
Text or chat with friends inside Yahoo! Mail. See how. http://overview.mail.yahoo.com/
----- Original Message ----
From: Anton Gorbunov
To: m...
Sent: Friday, November 16, 2007 6:54:13 PM
Subject: AW: AW: [msp430] eZ430-RF2500 UART
Yes it is possible to program the ez430-rf with the ez430 "dongel".
----- Ursprgliche Mail ----
Von: Aaron Greer
An: msp430@yahoogroups. com
Gesendet: Freitag, den 16. November 2007, 21:52:53 Uhr
Betreff: Re: AW: [msp430] eZ430-RF2500 UART
Dan, are you describing a way to program the RF2500 module with Vista?
----- "Dan Larson" wrote:
> What I found works is use an EZ-430 programmer (blue) with the RF2500
> devise (red)plugged into it. Use the center 4 pins to match up with
> the 4 pin socket on the ez430 kit.
>
> Dan
>
> ----- Original Message ----
> From: Anton Gorbunov < rad_junki@yahoo. de >
> To: msp430@yahoogroups. com
> Sent: Thursday, November 15, 2007 4:06:12 PM
> Subject: AW: [msp430] eZ430-RF2500 UART
>
> i have a ez430-rf. the serial interface works nice. the problem is
> only the vista do not really recognize it programmer only the sireal
> interface.
>
> ----- Ursprgliche Mail ----
>
> Von: Aaron Greer
>
> An: msp430
>
> Gesendet: Mittwoch, den 14. November 2007 , 20:01:24 Uhr
>
> Betreff: [msp430] eZ430-RF2500 UART
>
> Has anyone tried using the UART for communication with a PC through
> the USB interface? How does that work? With the ez430-F2013 module,
> the UART is not really a UART, the debugger grabs the data and
> displays it in the debugger terminal window. I'm assuming that the
> RF2500 UART relies on a USB to serial type of Windows driver to pass
> the serial data into a PC.. I wonder why TI decided to make this
> function available for the RF module, but not for the regular MCU
> module. It would be nice to have a serial port available which didn't
> require a debugging session.
>
>
>
>
>
>
>
> Jetzt Mails schnell in einem Vorschaufenster erfliegen. Dies und
> viel mehr bietet das neue Yahoo! Mail - www.yahoo.de/ mail
>
>
>
>
>
>
>
>
>
> ____________ _________ _________ _________ _________ _________ _
> Never miss a thing. Make Yahoo your home page.
> http://www.yahoo. com/r/hs
>
>
>
>
____________ _________ _________ ____ Ihr erstes Baby? Holen Sie sich Tipps von anderen Eltern. www.yahoo.de/ clever
____________________________________________________________________________________
Be a better pen pal.
Text or chat with friends inside Yahoo! Mail. See how. http://overview.mail.yahoo.com/
