Hi,
I need code for LPC2129 Can to communicate between three boards with each
tx and rx any 5 messages..
please help me out.
regards
Akram.
requesting for a code for lpc2129 Can.
Started by ●October 13, 2012
Reply by ●October 13, 20122012-10-13
On 13.10.2012 08:38, akram akku wrote:
> I need code for LPC2129 Can to communicate between three boards with each
> tx and rx any 5 messages..
>
> please help me out.
There is a lot of code in files section...
--
Timo
> I need code for LPC2129 Can to communicate between three boards with each
> tx and rx any 5 messages..
>
> please help me out.
There is a lot of code in files section...
--
Timo
Reply by ●October 13, 20122012-10-13
Il 13/10/2012 07:38, akram akku ha scritto:
>
>
> Hi,
>
> I need code for LPC2129 Can to communicate between three boards with each
> tx and rx any 5 messages..
>
> please help me out.
>
Technically.... you should write your application and ask to engineers
of this group specific questions if you find a problem or if you aren't
able to solve a bug or a requirement. But you have to realize your
application and this doesn't mean that you should ask to obtain some
pieces of souce code and then only connect them.... remember that
engineers here have their job and normally wrote their CAN
implementations and they have a value in terms of money, time spent and
effort.
>
> regards
> Akram.
>
>
>
>
> Hi,
>
> I need code for LPC2129 Can to communicate between three boards with each
> tx and rx any 5 messages..
>
> please help me out.
>
Technically.... you should write your application and ask to engineers
of this group specific questions if you find a problem or if you aren't
able to solve a bug or a requirement. But you have to realize your
application and this doesn't mean that you should ask to obtain some
pieces of souce code and then only connect them.... remember that
engineers here have their job and normally wrote their CAN
implementations and they have a value in terms of money, time spent and
effort.
>
> regards
> Akram.
>
>
Reply by ●October 13, 20122012-10-13
sorry sir, i actually worked on it,it's not working properly.I jst
wanted
the algorithm for my query.Even i aware of the value in terms of money,
time spent and
effort.
thank you
sorry again.
On Sat, Oct 13, 2012 at 11:12 AM, M. Manca wrote:
> **
> Il 13/10/2012 07:38, akram akku ha scritto:
>
> >
> >
> > Hi,
> >
> > I need code for LPC2129 Can to communicate between three boards with each
> > tx and rx any 5 messages..
> >
> > please help me out.
> >
> Technically.... you should write your application and ask to engineers
> of this group specific questions if you find a problem or if you aren't
> able to solve a bug or a requirement. But you have to realize your
> application and this doesn't mean that you should ask to obtain some
> pieces of souce code and then only connect them.... remember that
> engineers here have their job and normally wrote their CAN
> implementations and they have a value in terms of money, time spent and
> effort.
> >
> > regards
> > Akram.
> >
> >
> >
> >
>
>
>
--
****Akram****
the algorithm for my query.Even i aware of the value in terms of money,
time spent and
effort.
thank you
sorry again.
On Sat, Oct 13, 2012 at 11:12 AM, M. Manca wrote:
> **
> Il 13/10/2012 07:38, akram akku ha scritto:
>
> >
> >
> > Hi,
> >
> > I need code for LPC2129 Can to communicate between three boards with each
> > tx and rx any 5 messages..
> >
> > please help me out.
> >
> Technically.... you should write your application and ask to engineers
> of this group specific questions if you find a problem or if you aren't
> able to solve a bug or a requirement. But you have to realize your
> application and this doesn't mean that you should ask to obtain some
> pieces of souce code and then only connect them.... remember that
> engineers here have their job and normally wrote their CAN
> implementations and they have a value in terms of money, time spent and
> effort.
> >
> > regards
> > Akram.
> >
> >
> >
> >
>
>
>
--
****Akram****
Reply by ●October 13, 20122012-10-13
Il 13/10/2012 20:36, akram akku ha scritto:
> sorry sir, i actually worked on it,it's not working properly.I jst wanted
> the algorithm for my query.Even i aware of the value in terms of money,
> time spent and
> effort.
You ask to have a piece of software to communicate trough a CAN bus
right? This is a different matter. Ask about what is not working
properly and engineers of this group will help you.
>
> thank you
> sorry again.
>
> On Sat, Oct 13, 2012 at 11:12 AM, M. Manca wrote:
>
>> **
>> Il 13/10/2012 07:38, akram akku ha scritto:
>>
>>>
>>> Hi,
>>>
>>> I need code for LPC2129 Can to communicate between three boards with each
>>> tx and rx any 5 messages..
>>>
>>> please help me out.
>>>
>> Technically.... you should write your application and ask to engineers
>> of this group specific questions if you find a problem or if you aren't
>> able to solve a bug or a requirement. But you have to realize your
>> application and this doesn't mean that you should ask to obtain some
>> pieces of souce code and then only connect them.... remember that
>> engineers here have their job and normally wrote their CAN
>> implementations and they have a value in terms of money, time spent and
>> effort.
>>> regards
>>> Akram.
>>>
>>>
>>>
>>>
>>
>>
>>
>>
> sorry sir, i actually worked on it,it's not working properly.I jst wanted
> the algorithm for my query.Even i aware of the value in terms of money,
> time spent and
> effort.
You ask to have a piece of software to communicate trough a CAN bus
right? This is a different matter. Ask about what is not working
properly and engineers of this group will help you.
>
> thank you
> sorry again.
>
> On Sat, Oct 13, 2012 at 11:12 AM, M. Manca wrote:
>
>> **
>> Il 13/10/2012 07:38, akram akku ha scritto:
>>
>>>
>>> Hi,
>>>
>>> I need code for LPC2129 Can to communicate between three boards with each
>>> tx and rx any 5 messages..
>>>
>>> please help me out.
>>>
>> Technically.... you should write your application and ask to engineers
>> of this group specific questions if you find a problem or if you aren't
>> able to solve a bug or a requirement. But you have to realize your
>> application and this doesn't mean that you should ask to obtain some
>> pieces of souce code and then only connect them.... remember that
>> engineers here have their job and normally wrote their CAN
>> implementations and they have a value in terms of money, time spent and
>> effort.
>>> regards
>>> Akram.
>>>
>>>
>>>
>>>
>>
>>
>>
>>
Reply by ●October 13, 20122012-10-13
--- In l..., akram akku wrote:
>
> sorry sir, i actually worked on it,it's not working properly.I jst wanted
> the algorithm for my query.Even i aware of the value in terms of money,
> time spent and
> effort.
Algorithm? How can anyone in here suggest anything? What CAN mode do you want to run, for example? How fast? Any protocol? We don't even know if you have your test boards wired up correctly, the correct terminators in etc.
You don't even tell us the symptoms shown by your 'not working properly' code, what hardware and software debugging you have already done and what you found. Do you have ANY communication between any of yoru boards at all?
Your request, as it stands, is hopeless - a network of embedded boards cannot be written by blog.
Rgds,
Martin
>
> sorry sir, i actually worked on it,it's not working properly.I jst wanted
> the algorithm for my query.Even i aware of the value in terms of money,
> time spent and
> effort.
Algorithm? How can anyone in here suggest anything? What CAN mode do you want to run, for example? How fast? Any protocol? We don't even know if you have your test boards wired up correctly, the correct terminators in etc.
You don't even tell us the symptoms shown by your 'not working properly' code, what hardware and software debugging you have already done and what you found. Do you have ANY communication between any of yoru boards at all?
Your request, as it stands, is hopeless - a network of embedded boards cannot be written by blog.
Rgds,
Martin
