I'm thinking of getting a developement board for either LPC2478 or LPC
2468. I just have a few questions regarding a bootloader.

1. Is it possible to completely remove the Phillips boot loader and
just use my own?

2. If not, Do I have to jump to sections of the phillips bootloader in
order to write to flash, or can my bootloader be completely independant?

3. What are some good refernece documents for writing bootloaders for
LPC.

Start a New Thread

On Thursday 29 January 2009 20:07, robinsm123 wrote:
> I'm thinking of getting a developement board for either LPC2478 or
> LPC 2468. I just have a few questions regarding a bootloader.

Rolled my own. Just got the pcb from the fab. 2 layers lpc2468 32MB
ram, sd card, ethernet ks8721, 4 serial, usb host + usb and jtag.
Waiting for the solder paste.

>
> 1. Is it possible to completely remove the Phillips boot loader and
> just use my own?
>
> 2. If not, Do I have to jump to sections of the phillips bootloader
> in order to write to flash, or can my bootloader be completely
> independant?
>
> 3. What are some good refernece documents for writing bootloaders
> for LPC.

Boot loader would be one area i would looking closely.
But first to populate and exercise the board.

--
Rgds
JTD

Start a New Thread