FAT I/O code for Atmel 8051

I'm trying to find some code for my CompactFlash project. All the code
I find is for AVR and obviously wont work.  Does anyone have any full
code I can have? OR can recommend a place to purchase code?  Most of
the code I have found for sell is for x86 boards.


Thanks,

Sean

seanw122@vigoris.net (Sean Whitesell) wrote in
news:d122ada9.0401131351.147bff47@posting.google.com: 

> I'm trying to find some code for my CompactFlash project. All the code
> I find is for AVR and obviously wont work.  Does anyone have any full
> code I can have? OR can recommend a place to purchase code?  Most of
> the code I have found for sell is for x86 boards.

How hard could it be to port it? It's C after all.

-- 
- Mark ->
--

I may be showing my inexperience but I got to start somewhere.  In the
little time I have for the project I'll even ask stupid questions if they
somehow help.


"Mark A. Odell" <nospam@embeddedfw.com> wrote in message
news:Xns946FABD3CDFDBCopyrightMarkOdell@130.133.1.4...
> seanw122@vigoris.net (Sean Whitesell) wrote in
> news:d122ada9.0401131351.147bff47@posting.google.com:
>
> > I'm trying to find some code for my CompactFlash project. All the code
> > I find is for AVR and obviously wont work.  Does anyone have any full
> > code I can have? OR can recommend a place to purchase code?  Most of
> > the code I have found for sell is for x86 boards.
>
> How hard could it be to port it? It's C after all.
>
> --
> - Mark ->
> --

The AT89C51SND1 demo board comes with FAT code source

-- 
Best Regards
Ulf at atmel dot com
These comments are intended to be my own opinion and they
may, or may not be shared by my employer, Atmel Sweden.

"Sean Whitesell" <seanw122@vigoris.net> wrote in message
news:d122ada9.0401131351.147bff47@posting.google.com...
> I'm trying to find some code for my CompactFlash project. All the code
> I find is for AVR and obviously wont work.  Does anyone have any full
> code I can have? OR can recommend a place to purchase code?  Most of
> the code I have found for sell is for x86 boards.
>
>
> Thanks,
>
> Sean

I'm quite aware of that. But, that code is so interconnected that I'm
having a hard time pulling it out for my project.  My project will not
have the voice, song, and mp3 drivers.  I'm trying to get just the FAT
(and CompactFlash, ata, etc) code seperate.  Can you help with this?

thanks,

sean


"Ulf Samuelsson" <ulf@NOSPAMatmel.com> wrote in message news:<bu8jse$7od$1@public2.atmel-nantes.fr>...
> The AT89C51SND1 demo board comes with FAT code source
> 
> -- 
> Best Regards
> Ulf at atmel dot com
> These comments are intended to be my own opinion and they
> may, or may not be shared by my employer, Atmel Sweden.
> 
> "Sean Whitesell" <seanw122@vigoris.net> wrote in message
> news:d122ada9.0401131351.147bff47@posting.google.com...
> > I'm trying to find some code for my CompactFlash project. All the code
> > I find is for AVR and obviously wont work.  Does anyone have any full
> > code I can have? OR can recommend a place to purchase code?  Most of
> > the code I have found for sell is for x86 boards.
> >
> >
> > Thanks,
> >
> > Sean

"Sean Whitesell" <seanw122@vigoris.net> wrote in message
news:d122ada9.0401161128.1df02842@posting.google.com...
> I'm quite aware of that. But, that code is so interconnected that I'm
> having a hard time pulling it out for my project.  My project will not
> have the voice, song, and mp3 drivers.  I'm trying to get just the FAT
> (and CompactFlash, ata, etc) code seperate.  Can you help with this?
>
> thanks,
>
> sean
>


So much time, so little to do, or whas it the other way ?
You may ask your local Atmel contact though.
-- 
Best Regards
Ulf at atmel dot com
These comments are intended to be my own opinion and they
may, or may not be shared by my employer, Atmel Sweden.