How to Give Persistent Names To USB-Serial Devices on Ubuntu 14.04
If you have a bunch of USB-serial devices connected to your dock station and you needed to bind your USB-serial devices under static names so that all the USB-serial devices don't get to be assigned to random names by "udev" manager when you re-plug your laptop to the dock station, follow the instructions below. I will share the udev rules I created as a reference and give the step by step instructions to achieve persistent naming. All the steps worked on my Ubuntu 14.04...
Tenderfoot: Introduction to Magic (Numbers that is...)
Once upon a time, while participating in a source code review, I stumbled across the following C code in a header file:
struct Foo { //various structure fields char string_buffer[45+3]; //buffer requires about 45 bytes };My right eyebrow raised, I took a note, and continued with the code review, only to later stumble into this line of code in the body of a C function:
char * temp_string_buffer = (char*) malloc(45+3);Again, I took a note on this function, and continued...
Back from ESC Boston
NOT going to ESC Boston would have allowed me to stay home, in my comfort zone.
NOT going to ESC Boston would have saved me from driving in the absolutely horrible & stressful Boston traffic1.
NOT going to ESC Boston would have saved me from having to go through a full search & questioning session at the Canada Customs on my return2.
2017/06/06 update: Videos are now up!So two days...
Donald Knuth Is the Root of All Premature Optimization
This article is about something profound that a brilliant young professor at Stanford wrote nearly 45 years ago, and now we’re all stuck with it.
TL;DRThe idea, basically, is that even though optimization of computer software to execute faster is a noble goal, with tangible benefits, this costs time and effort up front, and therefore the decision to do so should not be made on whims and intuition, but instead should be made after some kind of analysis to show that it has net...
Launch of Youtube Channel: My First Videos - Embedded World 2017
I went to Embedded World 2017 in Nuremberg with an ambitious plan; I would make video highlights of several exhibits (booths) to be presented to the *Related sites audience. I would try to make the vendors focus their pitch on the essential in order to produce a one to three minutes video per booth.
So far my experience with making videos was limited to family videos, so I knew I had lots of reading to do and lots of Youtube videos and tutorials to watch. Trade shows are...
Intel 8088 - A blast from the past
The Intel 8088 is an 8 bit processor related to the 16 bit 8086.
The Microcomputer class consisted of wire-wrapping the chips to perfboard using sockets.I had taken computers apart, soldered, etc., but had never used wire-wrapping to construct a computer board to that point.Most people carried the board to class. A few people stared when I opened the plywood box with breadboard area, and plugged the full-sized power supply in. The lid is wide enough to hold the 11x17 paper the...
Zebras Hate You For No Reason: Why Amdahl's Law is Misleading in a World of Cats (And Maybe in Ours Too)
I’ve been wasting far too much of my free time lately on this stupid addicting game called the Kittens Game. It starts so innocently. You are a kitten in a catnip forest. Gather catnip.
And you click on Gather catnip and off you go. Soon you’re hunting unicorns and building Huts and studying Mathematics and Theology and so on. AND IT’S JUST A TEXT GAME! HTML and Javascript, that’s it, no pictures. It’s an example of an
Favorite Tools: C++11 std::array
Many embedded software and firmware projects must be developed to high standards of reliability. To meet these reliability requirements, firmware project teams will consider many design tradeoffs. For example, an engineering team may avoid or outright ban the use of dynamic memory allocation, a feature typically accessed via the C library call "malloc" or the C++ allocator "new". When authoring software under such...
Who else is going to Embedded World 2017 in Nuremberg?
These days I am particularly excited. In a little bit less than a month and a half, I will be travelling to Nuremberg in Germany to attend Embedded World, by far the biggest Embedded Systems trade show with over 1000 vendors displaying their products and services.
I have downloaded the Duolingo app and I'm trying to do a minimum of 30 minutes per day to learn some German. So far, I know that 'Frau' is a woman, 'Mann' is a man, 'Danke' is thank you and 'tschüss' is bye - still a...
My little runaway...
Since most vehicles won't float and land gently from more than a few inches, some type of stand is needed to keep the vehicle stationary as work is being done. It can also prevent crashes and broken things, which becomes more important as the vehicle becomes larger and heavier.
For now, most of my work is done with 1/10 scale or smaller vehicles, so I made a stand from leftover wood. Full-size vehicles may require a hydraulic lift and jack stands.
Smaller vehicles can be held by...
Reading and Understanding Profitability Metrics from Financial Statements
Whoa! That has got to be the most serious-minded title I’ve ever written. Profitability Metrics from Financial Statements, indeed. I’m still writing Part 2 of my Supply Chain Games article, and I was about to mention something about whether a company is profitable, when I realized something that didn’t quite fit into the flow of things, so I thought I’d handle it separately: how are you supposed to know what I mean, when I say a company is profitable? And how am I...
March is Oscilloscope Month — and at Tim Scale!
I got my oscilloscope today.
Maybe that was a bit of an understatement; I'll have to resort to gratuitous typography:
I GOT MY OSCILLOSCOPE TODAY!!!!Those of you who are reading this blog may remember I made a post about two years ago about searching for the right oscilloscope for me. Since then, I changed jobs and have been getting situated in the world of applications engineering, working on motor control projects. I've been gradually working to fill in gaps in the infrastructure...
Reverse engineering wireless wall outlets
Introduction
I am improving the domotics framework that I described in a previous article://www.embeddedrelated.com/showarticle/605.php
I want to support wireless wall outlets, allowing me to switch devices power from a remote location over HTTP.
To do so, I could design my own wireless wall outlets and use a hardware similar to the previous one, based on the NRF905 chipset. The problem is that such a product would not be certified, and that would be an issue regarding the home insurance,...
Basic hand tools for electronics assembly
Though the software tools vary with different microcontrollers, many hardware tools are the same.
Introduction to Microcontrollers - Adding Some Real-World Hardware
When 2 LEDs Just Don't Cut It Anymore
So far, we've done everything in this series using two LEDs and one button. I'm guessing that the thrill of blinking an LED has worn off by now, hard as that is to imagine. What's more, we've just about reached the limits of what we can learn with such limited I/O. We have come to the point where we need to add some hardware to our setup to continue with additional concepts and microcontroller...
Acceptance Tests vs. TDD
Contents:
Elliptic Curve Cryptography
Secure online communications require encryption. One standard is AES (Advanced Encryption Standard) from NIST. But for this to work, both sides need the same key for encryption and decryption. This is called Private Key encryption.
How to use SPI devices in NuttX RTOS
Previously in this EmbeddedRelated article, we saw how to use I2C device connected to your board. Although I2C devices are very common nowadays, probably you will need to use some SPI device as well. Today we will see how to do exactly that. So, lets to get started!
The SPI (Serial Peripheral Interface) is synchronous serial communication protocol (by synchronous it means there is a common clock signal to indicate when which signal transition will occur)....
Energia - program a TI MSP430 using Arduino sketches
TI MSP430 Launchpad
I started tinkering with microcontroller a couple of years ago with an Arduino Uno. I had a little experience with C, so programming in the Arduino environment has been relatively easy and straightforward for me. My code is not necessarily elegant or efficient, but I can usually figure out how to make an Arduino do what I want it to do eventually. A lot of credit to the Arduino userbase, as it is very easy to figure most things out with a quick Google...
Arduino robotics #4 - HC-SR04 ultrasonic sensor
Arduino RoboticsArduino robotics is a series of article chronicling my first autonomous robot build, Clusterbot. This build is meant to be affordable, relatively easy and instructive. The total cost of the build is around $50.
1. Arduino robotics - motor control2. Arduino robotics - chassis, locomotion and power3. Arduino robotics - wiring, coding and a test run4.Racing to Sleep
Today we’re going to talk about low-power design.
Suppose I’m an electrical engineer working with wildlife biologists who are gathering field data on the Saskatchewan ringed-neck mountain goat. My team has designed a device called the BigBrotherBear 2000 (BBB2000) with a trip cable and a motor and a camera and a temperature sensor and a hot-wire anemometer and a real-time clock and an SD card and a battery and a LoRa transceiver. The idea is something like...
2025 Embedded Online Conference: Your Guide to This Year's Schedule
Welcome to the 2025 Embedded Online Conference! As in previous years, the event features a rich mix of pre-recorded on-demand talks and live Zoom sessions including Keynotes, Workshops and Panel Discussions. We've carefully curated the schedule to deliver valuable technical content across a wide range of embedded systems topics.
New this year: Most live Q&A sessions will be held as track-based group discussions rather than individual speaker Q&As. These sessions will be moderated by Jacob...
Working with Microchip PIC 8-bit GPIO
The third in a series of five posts looks at GPIO with PIC 8-bit microcontrollers. After a detailed review of the registers for configuring and managing GPIO on the PIC18F47Q10 processor, a basic application is stood up programming those registers to blink external LEDs at 0.5Hz.
Introducing the VPCIe framework
IntroductionMy daily work involves platforms featuring an embedded CPU communcating with a FPGA device over a PCI Express link (PCIe for short). The main purpose of this link is for the CPU to convey configuration, control, and status commands to hardware slaves implemented in the FPGA. For data intensive applications (2D XRay detector readout backend), this link can also be used as a DMA channel to transfer data from the FPGA to the CPU memory. Finally, a slave can interrupt the CPU using...
Mathematics and Cryptography
The mathematics of number theory and elliptic curves can take a life time to learn because they are very deep subjects. As engineers we don't have time to earn PhD's in math along with all the things we have to learn just to make communications systems work. However, a little learning can go a long way to helping make our communications systems secure - we don't need to know everything. The following articles are broken down into two realms, number theory and elliptic...
8 Weeks - 8 Giveaways!
If for some reason, you've been putting off registering for the upcoming 2021 Embedded Online Conference, here are 8 good reasons to register today.
The idea is simple; if you are registered for the conference by the 'raffle date' for any of the following giveaways, you'll automatically be entered into the draw.
So for instance, if you are already registered for the conference or register before March the 22nd, you'll be automatically entered into the 8 draws...
Linear Feedback Shift Registers for the Uninitiated
In 2017 and 2018 I wrote an eighteen-part series of articles about linear feedback shift registers, or LFSRs:
div.jms-article-content ol > li { list-style-type: upper-roman } Ex-Pralite Monks and Finite Fields, in which we describe what an LFSR is as a digital circuit; its cyclic behavior over time; the definition of groups, rings, and fields; the isomorphism between N-bit LFSRs and the field \( GF(2^N) \); and the reason why I wrote this seriesWhat is Electronics
Introduction
One answer to the question posed by the title might be: "The understanding that allows a designer to interconnect electrical components to perform electrical tasks." These tasks can involve measurement, amplification, moving and storing digital data, dissipating energy, operating motors, etc. Circuit theory uses the sinusoidal relations between components, voltages, current and time to describe how a circuit functions. The parameters we can measure directly are...
C++ Assertion? Well Yes, But Actually No.
Assertions are a double-edged sword - on one side you enforce program correctness catching bugs close to their origin, on the other your application is subject to run-time error, like any interpreted language. This article explores what C++ can offer to get the advantages of assertions, without risking the crashes by moving contract checking at compile time.
Get Involved: Contribute Quiz Questions for the Embedded Systems Community for a Chance to Win a LAP-C Pro!
Submit a Quiz Question for a chance to win a Zeroplus Lac-C Pro!
