Tenderfoot: How to Write a Great Bug Report
A well-written bug report can save hours of debugging and prevent last-minute scrambles before demos. This post uses a contrived embedded RF product example to show what good and bad reports look like, the essential fields to include, and how clear reproduction steps helped find a simple bitmask bug before a trade show. Finish with a short template you can adapt to your team.
Who else is going to Sensors Expo in San Jose? Looking for roommate(s)!
Stephane Boucher is heading to Sensors Expo in San Jose for the first time, and he is bringing cameras to capture demos and build a highlights video. He is also looking for roommates for a roomy Airbnb near the convention center, plus local tips for making the most of a free day in the Bay Area. If you are attending, there is also a registration discount code and a VIP pass giveaway in the mix.
Voltage - A Close Look
The post examines what voltage actually indicates in fast circuits by revisiting a classic interview puzzle and transmission-line wave behavior. Using a voltmeter and a compass to infer electric and magnetic field directions, the author shows how the right-hand rule reveals energy-flow direction rather than a simple ‘voltage source’ location. Revisiting leading and reflected waves on an open transmission line, the post explains that reflected wave fronts convert magnetic field energy into electric field energy (doubling the voltage at the open) and that energy is exchanged between field forms rather than being lost or simply ‘reflected away.’ The author emphasizes that voltage can represent storage, flow, or dissipation depending on context, and that an oscilloscope remains the primary practical tool for observing these energy phenomena in high-speed design.
What is Electronics
This article challenges the conventional circuit-theory view and defines electronics as the controlled flow of electromagnetic field energy in conducting structures. It argues that signals are manifestations of stored and moving energy in the space between conductors rather than energy residing primarily inside conductors, using transmission-line examples to illustrate how only a tiny fraction of electrons carry current while most energy occupies surrounding fields. The post contrasts Maxwell’s field-based perspective with lumped-circuit abstractions, explains wavefronts, reflections, and the exchange between electric and magnetic energy, and shows how those behaviors produce oscillation and signal issues. The practical conclusion is that PCB geometry, impedance control, and decoupling placement must be designed to provide smooth paths for field energy to minimize interference and support high-speed operation.
Linear Regression with Evenly-Spaced Abscissae
Jason Sachs cuts through the matrix algebra to show a tiny trick for linear regression when x values are evenly spaced. You can compute the intercept as the mean and the slope as a simple weighted sum with arithmetic weights, using q = 12/(m^3 - m). The post includes Python examples and a compact routine to get least-squares coefficients without matrix solvers.
Linear Feedback Shift Registers for the Uninitiated, Part XIV: Gold Codes
Gold codes solve a practical spread-spectrum problem, sharing one PRBS across many transmitters eventually runs into ugly synchronization and correlation issues. Jason Sachs walks through why shifted copies of a single LFSR sequence are not enough, then shows how preferred pairs of m-sequences create a family of Gold codes with bounded cross-correlation. The post wraps with Python experiments and a UART DSSS demo that decodes multiple overlapping messages cleanly.
Crowdfunding Articles?
Technical writers in the embedded world often have the expertise, but not always the time or incentive to turn it into a post. Stephane Boucher explores a crowdfunding model for technical articles, where readers would pledge small amounts to back promising abstracts before the writing begins. It is an interesting attempt to create more high quality EE content by paying authors upfront.
How precise is my measurement?
Precision is quantifiable, not guesswork. This post walks through practical, measurement-oriented statistics you can apply to static or dynamic signals to answer the question, "How precise is my measurement?" It focuses on using multiple samples, checking distribution assumptions, and constructing confidence intervals and levels so you can trade measurement time for a desired precision.
Embedded World 2018 - More Videos!
Two cinematic videos from Embedded World 2018 turn the show floor into slow-motion, stabilized footage using a Zhiyun Crane gimbal and a Sony a6300. One is a SEGGER booth highlights piece featuring Rolf Segger and Axel Wolf, the other is a roaming montage with appearances from Jacob Beningo, Micheal Barr, and Alan Hawse. Stephane asks viewers to enable audio and share feedback.
Embedded World 2018 - The Interviews
Stephane Boucher brought video gear to Embedded World 2018 and teamed up with Jacob Beningo to capture concise vendor interviews that focus on real product news. The videos showcase Percepio's new Tracealyzer with a drone demo, Intrinsic ID's method for creating device-unique IDs from manufacturing variations, and SEGGER's broader toolset including embOS now certified by TÜV SÜD. Watch for short demos and expert explanations.
Going back to Germany!
A conference conversation turned into a return trip to Germany for Stephane Boucher, this time to visit SEGGER’s headquarters in Dusseldorf and produce videos. The post shares how a chance introduction at ESC Boston led to the invitation, and it teases coverage from SEGGER’s 25th anniversary celebration. He also invites local tips and customer questions before the trip.
Signal Processing Contest in Python (PREVIEW): The Worst Encoder in the World
Jason Sachs previews a hands-on Python contest to find the best velocity estimator for a noisy, low-cost quadrature encoder. The post explains the Estimator API, submission constraints, and a 5 second, 10 kHz evaluation harness that uses a simulated "Lucky Wheel" encoder with realistic manufacturing timing errors. Jason also includes a simple baseline estimator and discusses the practical tradeoff between noise reduction and phase lag in velocity estimation.
New Promo Video for the 2022 Embedded Online Conference
Less than a week remains before the 2022 Embedded Online Conference, and Stephane Boucher shares a new promo video that previews an all-star lineup of embedded engineers, shown in order of appearance: Helen Leigh, Peter McLaughlin, Jack Ganssle, Colin O'Flynn, Miro Samek, Jean Labrosse and others. If you haven't registered yet, watch the video and save $100 on registration with promo code EMBEDDEDRELATED.
Stuck with Jira — and Stuckons
Jason Sachs vents about Jira’s quirks and why it still feels stuck despite years of fixes. He walks through concrete pain points: nonstandard markup, relentless notification noise, poor meta-task support, and limited analytics that make day-to-day engineering work harder. To explain why schedules blow up, he introduces a simple kepton model of planons, workons, and stuckons that highlights unexpected work.
Arduino robotics #2 - chassis, locomotion and power
Lonnie Honeycutt walks through building Clusterbot's round differential-drive chassis, showing how a circular base and Tamiya gearbox simplify turning and torque tradeoffs. The post covers motor selection, wheel fit, balance issues, and a practical two-battery power arrangement with VMOT for the motors and a separate 9V for the Arduino. Expect hands-on tips and lessons learned from a first-time robot build.
Introduction to Microcontrollers - Ada - 7 Segments and Catching Errors
Mike demos an Ada implementation of a multiplexed 7-segment driver on the STM32F407 Discovery board, highlighting Ada idioms like protected objects for ISRs and packed-boolean GPIO mapping. The post shows practical timer setup for Timer 6, how to avoid ARR/CNT races, and how Ada's runtime range checks plus a last-chance handler surface out-of-range errors with file and line diagnostics.
Embedded Toolbox: Programmer's Calculator
A tiny but powerful cross-platform tool, QCalc evaluates full C-syntax expressions so you can paste results straight into firmware. It handles bitwise ops, mixed hex/decimal/binary constants, and scientific math, and it automatically shows integer results in formatted hex and binary. The post explains key features, variable handling, error messages, and how to run qcalc.tcl with the wish Tk interpreter.
I Stopped Testing Embedded Systems by Hand. Here's What Replaced It.
Everardo Garcia walks through the shift from manual, terminal-based system-level testing to automated tests that run during development. He shows how OpenHTF (a framework originally built at Google for manufacturing lines) plus a laptop, a USB cable, and ~150 lines of Python closes the functional testing gap most embedded teams carry, and how spec-driven prompting with GitHub Copilot makes writing plugs and phases fast enough to keep up.
3 Overlooked Embedded Software Elements
Jacob Beningo points out three often-overlooked elements that can make embedded projects less painful and faster to ship. He highlights model-generated code for off-target iteration, configuration-generated code to manage SKUs and avoid fragile conditional compilation, and automated test harnesses to catch regressions early. The post gives practical reasons to consider each approach and how they fit into modern embedded DevOps.
A wireless door monitor based on the BANO framework
Fabien Le Mentec built a battery-powered wireless door monitor and a reusable node framework called BANO to monitor doors across seven floors without wired links. The post highlights BANO's 17-byte key,value protocol, the node runtime that enables wake-on-interrupt low-power operation, and practical RF choices like the NRF905 plus a 330 µF cap to handle coin-cell transmission peaks. It includes source, PCB, and base station notes.
A Beginner's Guide to Embedded Systems
Embedded systems are everywhere, and this guide gives a practical, project-first roadmap for beginners. It explains what embedded systems are, the typical constraints you will face, and a clear learning sequence: circuit fundamentals, digital logic, C, and microcontrollers before moving on to RTOS or embedded Linux. The post also recommends hands-on dev boards and student clubs to accelerate real-world skills.
3 Good News
Stephane Boucher reports three quick wins for the EmbeddedRelated community: two sponsors have seeded a $1,000 rewards pool, the site now serves all pages over HTTPS, and the new forums have their first active discussions. If you want a share of the sponsor-funded rewards, jump into the forums and check the Vendors Directory for opportunities. Stay tuned for more updates.
ESC Boston's Videos are Now Up
Stephane Boucher shares the videos he produced from ESC Boston, including a short highlight montage, a booth video for DLOGIC, and full talk clips from the conference. He also reflects on what he learned shooting on the show floor, especially the challenge of getting engineers on camera. It’s a quick behind-the-scenes look at technical event videography, with a preview of his next stop in Germany.
How to Analyze a Three-Op-Amp Instrumentation Amplifier
The three-op-amp instrumentation amplifier gives you high input impedance, improved net bandwidth, and much lower sensitivity to resistor mismatch than a single-op-amp differential stage. Jason M. Sachs walks through the algebra, numeric examples, and historical notes to show how the preamp isolates common-mode, why splitting gain boosts bandwidth, how overall gain can be set with one resistor, and what practical limits to watch.
How to install Ubuntu 12.04 Precise, Xubuntu-desktop and Open JDK-7 on Beagleboard Rev. C2
Want to run Java GUI apps on a BeagleBoard Rev C2? This hands-on post walks through installing Ubuntu 12.04, adding the Xubuntu desktop, and getting OpenJDK-7 running, including SD flashing, u-boot and network setup, display and audio tweaks, and a fix for XFCE login ownership problems. Follow the exact commands and small workarounds the author used to get a monitor, sound, and Java VM working on the board.
Linear Feedback Shift Registers for the Uninitiated, Part III: Multiplicative Inverse, and Blankinship's Algorithm
Jason Sachs walks through Blankinship's constant-space variant of the Extended Euclidean Algorithm and shows how to compute multiplicative inverses both modulo an integer and in GF(2)[x]. The article uses clear numeric and polynomial examples, Python snippets, and an LFSR finite-field example to show how the algorithm yields Bézout coefficients and inverses useful for discrete-log tricks and cryptographic contexts. Readers get a practical recipe for inverse computation.
An Iterative Approach to USART HAL Design using ChatGPT
Discover how to leverage ChatGPT and an iterative process to design and generate a USART Hardware Abstraction Layer (HAL) for embedded systems, enhancing code reusability and scalability. Learn the step-by-step journey, improvements made, and the potential for generating HALs for other peripherals.
Modulation Alternatives for the Software Engineer
Jason starts with a hardware curiosity, the 7497 synchronous rate multiplier, and turns it into a practical lesson for firmware engineers. He contrasts conventional PWM with a simple accumulator-based method called "synthetic division," showing how it implements first-order delta-sigma behavior in software. The post explains when to pick PWM or delta-sigma and why the accumulator trick can give higher effective resolution at low update rates.
Tenderfoot: Embedded Software and Firmware Specialties
This post revisits an earlier Stack Overflow answer and breaks embedded firmware into practical specialties, from assembly optimization and device drivers to DSP, IoT networking, security, UI, and systems architecture. It outlines the core skills, tools, and math each specialty demands, and explains how product constraints and industries shape those roles. Newcomers get clear guidance on where to focus their learning and career development.
Lightweight C++ Error-Codes Handling
The traditional C++ approach to error handling tends to distinguish the happy path from the unhappy path. This makes handling errors hard (or at least boring) to write and hard to read. In this post, I present a technique based on chaining operations that merges the happy and the unhappy paths. Thanks to C++ template and inlining the proposed technique is lightweight and can be used proficiently for embedded software.
