You Don't Need an RTOS (Part 2)
In this second article, we'll tweak the simple superloop in three critical ways that will improve it's worst-case response time (WCRT) to be nearly as good as a preemptive RTOS ("real-time operating system"). We'll do this by adding task priorities, interrupts, and finite state machines. Additionally, we'll discuss how to incorporate a sleep mode when there's no work to be done and I'll also share with you a different variation on the superloop that can help schedule even the toughest of task sets.
You Don't Need an RTOS (Part 1)
In this first article, we'll compare our two contenders, the superloop and the RTOS. We'll define a few terms that help us describe exactly what functions a scheduler does and why an RTOS can help make certain systems work that wouldn't with a superloop. By the end of this article, you'll be able to: - Measure or calculate the deadlines, periods, and worst-case execution times for each task in your system, - Determine, using either a response-time analysis or a utilization test, if that set of tasks is schedulable using either a superloop or an RTOS, and - Assign RTOS task priorities optimally.
Make Your Own MCU Boards (2023 Teardown Conference)
Ditch the development boards! Products like the Nucleo development boards serve a wonderful purpose, but they’re ill-suited for projects that need to be small and cheap, such as hobby projects or products just beginning a production run. In this talk (a recording from the 2023 Teardown Conference), you’ll learn how to put a microcontroller or other custom circuit on a PCB a little larger than a stick of gum for less than $3 a board.
Embedded Systems Roadmaps
What skills should every embedded systems engineer have? What should you study next to improve yourself as an embedded systems engineer? In this article I'll share with you a few lists from well-respected sources that seek to answer these questions, with the hope of helping provide you a path to mastery. Whether you've only just finished your first Arduino project or you've been building embedded systems for decades, I believe there's something in here for everyone to help improve themselves as embedded systems engineers.
What does it mean to be 'Turing complete'?
The term "Turing complete" describes all computers and even some things we don't expect to be as powerful as a typical computer. In this article, I describe what it means and discuss the implications of Turing completeness on projects that need just a little more power, on alternative processor designs, and even security.
What I Learned From Crashing and Burning in Grad School
Have you ever felt so consumed by something that it started to crowd other parts of your life? So obsessed with success in a particular area that you could hardly think about anything else? I found myself in exactly that spot in 2018 when I first started graduate school; I wanted to succeed so badly that I worked myself to the bone and I let even my marriage and my health suffer in service to it. This state of being is, believe it or not, NOT conducive to success, in neither the long-term nor the short-term. But it took two authors and one pivotal book for me to understand that, to see the pit I had dug for myself, and to begin the path back out. In this blog, I want to share with you my journey in the hopes that you can avoid the mistakes I made.
You Don't Need an RTOS (Part 4)
In this fourth (and final!) article I'll share with you the last of the inter-process communication (IPC) methods I mentioned in Part 3: mailboxes/queues, counting semaphores, the Observer pattern, and something I'm calling a "marquee". When we're done, we'll have created the scaffolding for tasks to interact in all sorts of different the ways. Additionally, I'll share with you another alternative design for a non-preemptive scheduler called a dispatch queue that is simple to conceptualize and, like the time-triggered scheduler, can help you schedule some of your most difficult task sets.
Make Your Own MCU Boards (2023 Teardown Conference)
Ditch the development boards! Products like the Nucleo development boards serve a wonderful purpose, but they’re ill-suited for projects that need to be small and cheap, such as hobby projects or products just beginning a production run. In this talk (a recording from the 2023 Teardown Conference), you’ll learn how to put a microcontroller or other custom circuit on a PCB a little larger than a stick of gum for less than $3 a board.
Pay it Forward
A popular car bumper sticker reads, "If you can read this, thank a teacher!" I might say, "If you can read THIS (article on Embedded Related), then you've been blessed with great experiences and/or great educators or volunteers that got you excited about tech and helped you believe that you had a future in this field!" Why not pay it forward by helping other children have those same great experiences? As we enter another season of giving, I hope you consider doing what you can to support the hundreds or thousands of non-profit organizations, educators, and volunteers around the world who are getting kids excited about tech the same way YOU got excited about tech. In this article, I'll share with you a handful of organizations that I know of or donate to that have this mission. How do you like to give back?
The Teardown Conference Call for Proposals is Open for Another Week!
The Teardown conference "Call for Proposals" goes until Wednesday, January 15th! Get yours in soon!
Make Your Own MCU Boards (2023 Teardown Conference)
Ditch the development boards! Products like the Nucleo development boards serve a wonderful purpose, but they’re ill-suited for projects that need to be small and cheap, such as hobby projects or products just beginning a production run. In this talk (a recording from the 2023 Teardown Conference), you’ll learn how to put a microcontroller or other custom circuit on a PCB a little larger than a stick of gum for less than $3 a board.
What I Learned From Crashing and Burning in Grad School
Have you ever felt so consumed by something that it started to crowd other parts of your life? So obsessed with success in a particular area that you could hardly think about anything else? I found myself in exactly that spot in 2018 when I first started graduate school; I wanted to succeed so badly that I worked myself to the bone and I let even my marriage and my health suffer in service to it. This state of being is, believe it or not, NOT conducive to success, in neither the long-term nor the short-term. But it took two authors and one pivotal book for me to understand that, to see the pit I had dug for myself, and to begin the path back out. In this blog, I want to share with you my journey in the hopes that you can avoid the mistakes I made.
Pay it Forward
A popular car bumper sticker reads, "If you can read this, thank a teacher!" I might say, "If you can read THIS (article on Embedded Related), then you've been blessed with great experiences and/or great educators or volunteers that got you excited about tech and helped you believe that you had a future in this field!" Why not pay it forward by helping other children have those same great experiences? As we enter another season of giving, I hope you consider doing what you can to support the hundreds or thousands of non-profit organizations, educators, and volunteers around the world who are getting kids excited about tech the same way YOU got excited about tech. In this article, I'll share with you a handful of organizations that I know of or donate to that have this mission. How do you like to give back?
The Teardown Conference Call for Proposals is Open for Another Week!
The Teardown conference "Call for Proposals" goes until Wednesday, January 15th! Get yours in soon!
Project Log: Pixelblaze Christmas Lights
Festive fun and the hacker spirit combine in my janky attempt to adorn my house with addressable LEDs! In this post, I show you how I used a Pixelblaze and a cheap strip of WS2811 RGB LEDs (and not a little bit of hot glue and paper clips) to make a super cool set of Christmas lights.
