Sign in

username:

password:



Not a member?

Search Comp.Arch.Embedded



Search tips

embedded by Keywords

68HC11 | 68HC12 | 8051 | 8052 | ARM | ARM7 | Asic | AT91 | AT91RM9200 | Atmel | AVR | AVRStudio | Bootloader | CFP | CompactFlash | Cygnal | Cypress | Dataflash | DSP | eCos | EEPROM | Embedded Linux | Emulator | Endian | Ethernet | Firewire | FPGA | Freescale | GCC | GNUARM | GSM | H8 | HDLC | I2C | Infineon | Interrupts | Java | JTAG | LCD | LED | LPC2000 | MCU | Microchip | MMC | MPLAB | MSP430 | PC104 | PCB | PCI | PCMCIA | PowerPC | Rabbit | RS232 | RS485 | RTOS | SBC | SDRAM | Sensor | SPI | STK500 | UART | UML | USART | USB | Verilog | VHDL | VxWorks | Xilinx

Ads

Discussion Groups

See Also

DSPFPGAElectronics

Discussion Groups | Comp.Arch.Embedded | I2C Driver for DSP/BIOS

There are 2 messages in this thread.

You are currently looking at messages 0 to 2.

I2C Driver for DSP/BIOS - ejkrohne - 2009-10-09 15:47:00

I've been in the embedded area for quite some time. I am currently running
DSP/BIOS on a TI F2801.

I am having trouble accessing an EEPROM over I2C.

I saw a thread that mentioned a DSP/BIOS driver for I2C and was wondering
if I could get the source to modify for my application.

I need to be able to write and/or read n bytes to/from any address in the
EEPROM.

	   
					
---------------------------------------		
This message was sent using the comp.arch.embedded web interface on
http://www.EmbeddedRelated.com



Re: I2C Driver for DSP/BIOS - Vladimir Vassilevsky - 2009-10-11 22:42:00


ejkrohne wrote:

> I've been in the embedded area for quite some time. I am currently running
> DSP/BIOS on a TI F2801.
> 
> I am having trouble accessing an EEPROM over I2C.

Don't use DSP/BIOS. Control the hardware by your own.

> I saw a thread that mentioned a DSP/BIOS driver for I2C and was wondering
> if I could get the source to modify for my application. 
> I need to be able to write and/or read n bytes to/from any address in the
> EEPROM.

Read the EEPROM datasheet, read the 21xx manual, write 20 lines of code.


Vladimir Vassilevsky
DSP and Mixed Signal Design Consultant
http://www.abvolt.com