Sign in

Search piclist

Subscribe to piclist

piclist by Keywords

12F675 | 16F628 | 16F84 | 16f877 | 16F877A | 16F88 | 18F458 | ADC | AVR | Bootloader | CAN | CCS | CRC | EAGLE | EEPROM | ICD | ICSP | IDE | JDM | LED | Macros | Microchip | MPLAB | PCB-CAD | PIC10F | Pic12f675 | PIC16F84 | PIC16F84A | PIC16F877 | PIC18 | PIC18F452 | PicBasic | PICC | PICSTART | PWM | RS-485 | RS232 | SMT | SPI | UART | USART | USB | Wireless | Wisp628 | Xilinx

Ads

Discussion Groups

See Also

DSP

FPGA

Electronics

Discussion Groups | Piclist | Wisp628

Click here...

Advertise Here

A discussion group for the PICMicro microcontroller. Also called the Microchip PIC, this list is dedicated to the use and abuse of this fine, simple, microcontroller. Close to topic posts are welcome, ie. general electronics.

Wisp628 - Stephen D. Barnes - Jun 27 18:05:00 2003

Hello all, Is there programming software out there other than XWisp and Wisp that is compatible with the Wisp628 programmer? TIA for any replies. Regards, Stephen Barnes

(You need to be a member of piclist -- send a blank email to piclist-subscribe@yahoogroups.com )

Re: Wisp628 - holopoint.rm - Jun 30 10:44:00 2003

> Is there programming software out there other than XWisp and Wisp that is > compatible with the Wisp628 programmer? Bumblebee, http://home.hccnet.nl/d.a.kuipers/pic/bumblebee/ But the current version does not work with the PIC18 series. BTW, the XWisp is easier to use once you get used to that python thing it runs on.

(You need to be a member of piclist -- send a blank email to piclist-subscribe@yahoogroups.com )

Re: Re: Wisp628 - Stephen D. Barnes - Jun 30 16:35:00 2003

Thanks for the reply, I'll check it out!

Regards,

Steve

----- Original Message -----

From: holopoint.rm

To: p...@yahoogroups.com

Sent: Monday, June 30, 2003 11:44 AM

Subject: [piclist] Re: Wisp628

> Is there programming software out there other than XWisp and Wisp that is > compatible with the Wisp628 programmer? Bumblebee, http://home.hccnet.nl/d.a.kuipers/pic/bumblebee/ But the current version does not work with the PIC18 series. BTW, the XWisp is easier to use once you get used to that python thing it runs on.

to unsubscribe, go to http://www.yahoogroups.com and follow the instructions

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

(You need to be a member of piclist -- send a blank email to piclist-subscribe@yahoogroups.com )

Wisp628 - upand_at_them - Feb 28 22:55:00 2005

Hi all, I just bought a Wisp628 and I see on the Wouter's web page that the software doesn't work on Win2K. Is there other software for it that does? Or is there a driver that I need? Also, it doesn't list support for the 16F88. Is this just outdated information or am I out of luck? Mike

Re: Wisp628

(You need to be a member of piclist -- send a blank email to piclist-subscribe@yahoogroups.com )

Re: Wisp628 - Eugene Gopalan - Feb 28 23:09:00 2005

I use Wisp628 with Xwisp2 which is supposed to work on any win95 and up machine (haven't tried it on 2K). The device list supports the 16F88.

You can get it here: http://www.robh.nl/picsoft.html

Eugene upand_at_them wrote:

Hi all, I just bought a Wisp628 and I see on the Wouter's web page that the software doesn't work on Win2K. Is there other software for it that does? Or is there a driver that I need? Also, it doesn't list support for the 16F88. Is this just outdated information or am I out of luck? Mike

to unsubscribe, go to http://www.yahoogroups.com and follow the instructions --- [This E-mail has been scanned for viruses]

-- Eugene S. Gopalan
Systems Manager
Sierra Technology (M) S/B
No 27, Jalan SS 25/41
Mayang Industrial Park
47301 Petaling Jaya
Selangor, Malaysia.
Tel: 603 78063966
Fax: 603 78063900

(You need to be a member of piclist -- send a blank email to piclist-subscribe@yahoogroups.com )

Re: Wisp628 - upand_at_them - Mar 1 16:14:00 2005

Thanks. Mike --- In , Eugene Gopalan <eugene@s...> wrote:

(You need to be a member of piclist -- send a blank email to piclist-subscribe@yahoogroups.com )