Sign in
Search msp430
Subscribe to msp430
Ads
Discussion Groups
Discussion Groups | MSP430 | Default value in EEPROM 24XX series
The purpose of this group is to foster exchange of information on the Texas Instruments MSP430 family of microcontrollers and related tools. Everyone welcome, all levels of familiarity/expertise.
Default value in EEPROM 24XX series - diptipanchal - Jul 23 2:45:51 2008
We are using 24XX series EEPROM of microchip make. I have read the data from
the EEPROM (without writing data to EEPROM), it always give as 0xFF. Atleast
i have checked in 5 EEPROM.
In the datasheet, it is not mentioned what should be the default value?
Could anyone let me know what should be the default value in EEPROM.
-
Dipti
--
View this message in context: http://www.nabble.com/Default-value-in-EEPROM-24XX-series-tp18604798p18604798.html
Sent from the MSP430 - Discuss mailing list archive at Nabble.com.
------------------------------------
(You need to be a member of msp430 -- send a blank email to msp430-subscribe@yahoogroups.com )
RE: Default value in EEPROM 24XX series - Microbit_P43000 - Jul 23 3:03:00 2008
Non-volatile memory like EEPROM always comes in the 'erased' state IOW 0xFF.
So, this is normal in your EEPROM.
AFAIK the only exception is large NAND flash, which can/will have bad sector
markers.
HTH
-- Kris
-----Original Message-----
From: m...@yahoogroups.com [mailto:m...@yahoogroups.com] On Behalf Of
diptipanchal
Sent: Wednesday, 23 July 2008 4:46 PM
To: m...@yahoogroups.com
Subject: [msp430] Default value in EEPROM 24XX series
We are using 24XX series EEPROM of microchip make. I have read the data from
the EEPROM (without writing data to EEPROM), it always give as 0xFF. Atleast
i have checked in 5 EEPROM.
In the datasheet, it is not mentioned what should be the default value?
Could anyone let me know what should be the default value in EEPROM.
-
Dipti
--
View this message in context:
http://www.nabble.com/Default-value-in-EEPROM-24XX-series-tp18604798p1860479
8.html
Sent from the MSP430 - Discuss mailing list archive at Nabble.com.
------------------------------------
(You need to be a member of msp430 -- send a blank email to msp430-subscribe@yahoogroups.com )
So, this is normal in your EEPROM.
AFAIK the only exception is large NAND flash, which can/will have bad sector
markers.
HTH
-- Kris
-----Original Message-----
From: m...@yahoogroups.com [mailto:m...@yahoogroups.com] On Behalf Of
diptipanchal
Sent: Wednesday, 23 July 2008 4:46 PM
To: m...@yahoogroups.com
Subject: [msp430] Default value in EEPROM 24XX series
We are using 24XX series EEPROM of microchip make. I have read the data from
the EEPROM (without writing data to EEPROM), it always give as 0xFF. Atleast
i have checked in 5 EEPROM.
In the datasheet, it is not mentioned what should be the default value?
Could anyone let me know what should be the default value in EEPROM.
-
Dipti
--
View this message in context:
http://www.nabble.com/Default-value-in-EEPROM-24XX-series-tp18604798p1860479
8.html
Sent from the MSP430 - Discuss mailing list archive at Nabble.com.
------------------------------------
(You need to be a member of msp430 -- send a blank email to msp430-subscribe@yahoogroups.com )
RE: Default value in EEPROM 24XX series - dipt...@mt.com - Jul 23 3:24:46 2008
In my application, based on this default value of the EEPROM, its gonna
perform some 'X' task. If in future this default value i.e. 0xFF would
change then my application won't perform 'X' task. That is why I want to
be 100% sure whether it has to be 0xFF or not.
Just a doubt, If it comes in erased state why datasheet does not mention
about it ??
--
Dipti
________________________________
From: m...@yahoogroups.com [mailto:m...@yahoogroups.com] On Behalf
Of Microbit_P43000
Sent: Wednesday, July 23, 2008 12:33 PM
To: m...@yahoogroups.com
Subject: RE: [msp430] Default value in EEPROM 24XX series
Non-volatile memory like EEPROM always comes in the 'erased' state IOW
0xFF.
So, this is normal in your EEPROM.
AFAIK the only exception is large NAND flash, which can/will have bad
sector
markers.
HTH
-- Kris
-----Original Message-----
From: m...@yahoogroups.com
[mailto:m...@yahoogroups.com ] On
Behalf Of
diptipanchal
Sent: Wednesday, 23 July 2008 4:46 PM
To: m...@yahoogroups.com
Subject: [msp430] Default value in EEPROM 24XX series
We are using 24XX series EEPROM of microchip make. I have read the data
from
the EEPROM (without writing data to EEPROM), it always give as 0xFF.
Atleast
i have checked in 5 EEPROM.
In the datasheet, it is not mentioned what should be the default value?
Could anyone let me know what should be the default value in EEPROM.
-
Dipti
--
View this message in context:
http://www.nabble.com/Default-value-in-EEPROM-24XX-series-tp18604798p186
0479
8.html
Sent from the MSP430 - Discuss mailing list archive at Nabble.com.
------------------------------------
(You need to be a member of msp430 -- send a blank email to msp430-subscribe@yahoogroups.com )
perform some 'X' task. If in future this default value i.e. 0xFF would
change then my application won't perform 'X' task. That is why I want to
be 100% sure whether it has to be 0xFF or not.
Just a doubt, If it comes in erased state why datasheet does not mention
about it ??
--
Dipti
________________________________
From: m...@yahoogroups.com [mailto:m...@yahoogroups.com] On Behalf
Of Microbit_P43000
Sent: Wednesday, July 23, 2008 12:33 PM
To: m...@yahoogroups.com
Subject: RE: [msp430] Default value in EEPROM 24XX series
Non-volatile memory like EEPROM always comes in the 'erased' state IOW
0xFF.
So, this is normal in your EEPROM.
AFAIK the only exception is large NAND flash, which can/will have bad
sector
markers.
HTH
-- Kris
-----Original Message-----
From: m...@yahoogroups.com
[mailto:m...@yahoogroups.com
Behalf Of
diptipanchal
Sent: Wednesday, 23 July 2008 4:46 PM
To: m...@yahoogroups.com
Subject: [msp430] Default value in EEPROM 24XX series
We are using 24XX series EEPROM of microchip make. I have read the data
from
the EEPROM (without writing data to EEPROM), it always give as 0xFF.
Atleast
i have checked in 5 EEPROM.
In the datasheet, it is not mentioned what should be the default value?
Could anyone let me know what should be the default value in EEPROM.
-
Dipti
--
View this message in context:
http://www.nabble.com/Default-value-in-EEPROM-24XX-series-tp18604798p186
0479
8.html
Sent from the MSP430 - Discuss mailing list archive at Nabble.com.
------------------------------------
(You need to be a member of msp430 -- send a blank email to msp430-subscribe@yahoogroups.com )
Re: Default value in EEPROM 24XX series - Ian Okey - Jul 23 3:44:07 2008
2008/7/23 :
> In my application, based on this default value of the EEPROM, its gonna
> perform some 'X' task. If in future this default value i.e. 0xFF would
> change then my application won't perform 'X' task. That is why I want to
> be 100% sure whether it has to be 0xFF or not.
>
> Just a doubt, If it comes in erased state why datasheet does not mention
> about it ??
>
> --
>
> Dipti
>
> It does not mention it because, while it is normal for the device to be in
its erased state it is not normally guaranteed, so relying on this for your
device operation is a somewhat risky strategy. If you must have some magic
value in a given location then it is up to you to put it there.
Ian
[Non-text portions of this message have been removed]
------------------------------------
(You need to be a member of msp430 -- send a blank email to msp430-subscribe@yahoogroups.com )
> In my application, based on this default value of the EEPROM, its gonna
> perform some 'X' task. If in future this default value i.e. 0xFF would
> change then my application won't perform 'X' task. That is why I want to
> be 100% sure whether it has to be 0xFF or not.
>
> Just a doubt, If it comes in erased state why datasheet does not mention
> about it ??
>
> --
>
> Dipti
>
> It does not mention it because, while it is normal for the device to be in
its erased state it is not normally guaranteed, so relying on this for your
device operation is a somewhat risky strategy. If you must have some magic
value in a given location then it is up to you to put it there.
Ian
[Non-text portions of this message have been removed]
------------------------------------
(You need to be a member of msp430 -- send a blank email to msp430-subscribe@yahoogroups.com )
Re: Default value in EEPROM 24XX series - Arie de Muijnck - Jul 23 19:06:12 2008
----- Original Message -----
From:
To:
Sent: Wednesday, July 23, 2008 09-24
Subject: RE: [msp430] Default value in EEPROM 24XX series
>
> In my application, based on this default value of the EEPROM, its gonna
> perform some 'X' task. If in future this default value i.e. 0xFF would
> change then my application won't perform 'X' task. That is why I want to
> be 100% sure whether it has to be 0xFF or not.
>
> Just a doubt, If it comes in erased state why datasheet does not mention
> about it ??
> Dipti
> ________________________________
> From: m...@yahoogroups.com [mailto:m...@yahoogroups.com] On Behalf
> Of Microbit_P43000
>
> Non-volatile memory like EEPROM always comes in the 'erased' state IOW
> 0xFF.
> So, this is normal in your EEPROM.
> AFAIK the only exception is large NAND flash, which can/will have bad
> sector
> markers.
And also: the very nice pin-compatible FRAM chips from Ramtron (100 ns R/W
time, and almost infinite write operations allowed) just happen to come with
a somewhat random 0x00 - 0xFF pattern.
Don't ever trust an initial state - program it explictly in production,
maybe using some special 'init' command in the application.
Arie de Muynck
------------------------------------
(You need to be a member of msp430 -- send a blank email to msp430-subscribe@yahoogroups.com )
RE: Default value in EEPROM 24XX series - dipt...@mt.com - Jul 24 0:05:55 2008
Thanks for all your inputs....
--
Dipti
________________________________
From: m...@yahoogroups.com [mailto:m...@yahoogroups.com] On Behalf
Of Arie de Muijnck
Sent: Thursday, July 24, 2008 1:45 AM
To: m...@yahoogroups.com
Subject: Re: [msp430] Default value in EEPROM 24XX series
----- Original Message -----
From: >
To: >
Sent: Wednesday, July 23, 2008 09-24
Subject: RE: [msp430] Default value in EEPROM 24XX series
>
> In my application, based on this default value of the EEPROM, its
gonna
> perform some 'X' task. If in future this default value i.e. 0xFF would
> change then my application won't perform 'X' task. That is why I want
to
> be 100% sure whether it has to be 0xFF or not.
>
> Just a doubt, If it comes in erased state why datasheet does not
mention
> about it ??
> Dipti
> ________________________________
> From: m...@yahoogroups.com
[mailto:m...@yahoogroups.com ] On
Behalf
> Of Microbit_P43000
>
> Non-volatile memory like EEPROM always comes in the 'erased' state IOW
> 0xFF.
> So, this is normal in your EEPROM.
> AFAIK the only exception is large NAND flash, which can/will have bad
> sector
> markers.
And also: the very nice pin-compatible FRAM chips from Ramtron (100 ns
R/W
time, and almost infinite write operations allowed) just happen to come
with
a somewhat random 0x00 - 0xFF pattern.
Don't ever trust an initial state - program it explictly in production,
maybe using some special 'init' command in the application.
Arie de Muynck
[Non-text portions of this message have been removed]
------------------------------------
(You need to be a member of msp430 -- send a blank email to msp430-subscribe@yahoogroups.com )
--
Dipti
________________________________
From: m...@yahoogroups.com [mailto:m...@yahoogroups.com] On Behalf
Of Arie de Muijnck
Sent: Thursday, July 24, 2008 1:45 AM
To: m...@yahoogroups.com
Subject: Re: [msp430] Default value in EEPROM 24XX series
----- Original Message -----
From:
To:
Sent: Wednesday, July 23, 2008 09-24
Subject: RE: [msp430] Default value in EEPROM 24XX series
>
> In my application, based on this default value of the EEPROM, its
gonna
> perform some 'X' task. If in future this default value i.e. 0xFF would
> change then my application won't perform 'X' task. That is why I want
to
> be 100% sure whether it has to be 0xFF or not.
>
> Just a doubt, If it comes in erased state why datasheet does not
mention
> about it ??
> Dipti
> ________________________________
> From: m...@yahoogroups.com
[mailto:m...@yahoogroups.com
Behalf
> Of Microbit_P43000
>
> Non-volatile memory like EEPROM always comes in the 'erased' state IOW
> 0xFF.
> So, this is normal in your EEPROM.
> AFAIK the only exception is large NAND flash, which can/will have bad
> sector
> markers.
And also: the very nice pin-compatible FRAM chips from Ramtron (100 ns
R/W
time, and almost infinite write operations allowed) just happen to come
with
a somewhat random 0x00 - 0xFF pattern.
Don't ever trust an initial state - program it explictly in production,
maybe using some special 'init' command in the application.
Arie de Muynck
[Non-text portions of this message have been removed]
------------------------------------
(You need to be a member of msp430 -- send a blank email to msp430-subscribe@yahoogroups.com )
RE: Default value in EEPROM 24XX series - Microbit_P43000 - Jul 24 0:31:12 2008
Good point. I would rely on a unique signature, like 4-6 bytes long.
At reset, check for that signature in EEPROM - if not there, it's a default
device. I always use this principle in RAM to work out whether an MCU is in
cold or warm start.
B rgds
Kris
-----Original Message-----
From: m...@yahoogroups.com [mailto:m...@yahoogroups.com] On Behalf Of
Arie de Muijnck
Sent: Thursday, 24 July 2008 6:15 AM
To: m...@yahoogroups.com
Subject: Re: [msp430] Default value in EEPROM 24XX series
----- Original Message -----
From:
To:
Sent: Wednesday, July 23, 2008 09-24
Subject: RE: [msp430] Default value in EEPROM 24XX series
>
> In my application, based on this default value of the EEPROM, its gonna
> perform some 'X' task. If in future this default value i.e. 0xFF would
> change then my application won't perform 'X' task. That is why I want to
> be 100% sure whether it has to be 0xFF or not.
>
> Just a doubt, If it comes in erased state why datasheet does not mention
> about it ??
> Dipti
> ________________________________
> From: m...@yahoogroups.com [mailto:m...@yahoogroups.com] On Behalf
> Of Microbit_P43000
>
> Non-volatile memory like EEPROM always comes in the 'erased' state IOW
> 0xFF.
> So, this is normal in your EEPROM.
> AFAIK the only exception is large NAND flash, which can/will have bad
> sector
> markers.
And also: the very nice pin-compatible FRAM chips from Ramtron (100 ns R/W
time, and almost infinite write operations allowed) just happen to come with
a somewhat random 0x00 - 0xFF pattern.
Don't ever trust an initial state - program it explictly in production,
maybe using some special 'init' command in the application.
Arie de Muynck
------------------------------------
(You need to be a member of msp430 -- send a blank email to msp430-subscribe@yahoogroups.com )
At reset, check for that signature in EEPROM - if not there, it's a default
device. I always use this principle in RAM to work out whether an MCU is in
cold or warm start.
B rgds
Kris
-----Original Message-----
From: m...@yahoogroups.com [mailto:m...@yahoogroups.com] On Behalf Of
Arie de Muijnck
Sent: Thursday, 24 July 2008 6:15 AM
To: m...@yahoogroups.com
Subject: Re: [msp430] Default value in EEPROM 24XX series
----- Original Message -----
From:
To:
Sent: Wednesday, July 23, 2008 09-24
Subject: RE: [msp430] Default value in EEPROM 24XX series
>
> In my application, based on this default value of the EEPROM, its gonna
> perform some 'X' task. If in future this default value i.e. 0xFF would
> change then my application won't perform 'X' task. That is why I want to
> be 100% sure whether it has to be 0xFF or not.
>
> Just a doubt, If it comes in erased state why datasheet does not mention
> about it ??
> Dipti
> ________________________________
> From: m...@yahoogroups.com [mailto:m...@yahoogroups.com] On Behalf
> Of Microbit_P43000
>
> Non-volatile memory like EEPROM always comes in the 'erased' state IOW
> 0xFF.
> So, this is normal in your EEPROM.
> AFAIK the only exception is large NAND flash, which can/will have bad
> sector
> markers.
And also: the very nice pin-compatible FRAM chips from Ramtron (100 ns R/W
time, and almost infinite write operations allowed) just happen to come with
a somewhat random 0x00 - 0xFF pattern.
Don't ever trust an initial state - program it explictly in production,
maybe using some special 'init' command in the application.
Arie de Muynck
------------------------------------
(You need to be a member of msp430 -- send a blank email to msp430-subscribe@yahoogroups.com )