2106 | ADC | ARM7 | Atmel | Bootloader | CAN | CrossStudio | CrossWorks | DDS | ECos | Ethernet | ETM | FIFO | FLASH | FPGA | GCC | GDB | GNU | GNUARM | GPIO | I2C | IAP | IAR | JTAG | Kickstart | LCD | Linux | LPC | LPC-E2294 | LPC2000 | LPC2100 | LPC2104 | Lpc2106 | Lpc210x | LPC2114 | LPC2119 | LPC2124 | LPC2129 | Lpc2138 | LPC213x | LPC21xx | LPC2210 | LPC2212 | LPC2214 | LPC2292 | LPC2294 | LPC2xxx | LPC3128 | MCB2100 | Olimex | Philips | PWM | Rowley | RTC | RTOS | SPI | SSP | UART | UART0 | UART1 | ULINK | USB | Watchdog | Wiggler

Hello all,
Is available arm support package for CrossWorks to LPC13xx family?
best regards,
Jakub


(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )

Hi,

We received our first LPC1300 board only yesterday; no, there=92s no suppor=
t
yet, but it will come.

-- Paul.

From: l...@yahoogroups.com [mailto:l...@yahoogroups.com] On Behalf Of
Jakub Szumacher
Sent: 19 November 2008 10:44
To: l...@yahoogroups.com
Subject: [lpc2000] LPC13xx

Hello all,
=A0
Is available arm support package for CrossWorks to LPC13xx family?
=A0
best regards,
Jakub

------------------------------------



(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )

Knowing how fast Paul works, I guess that means a LPC1300 BSP sometime
late this evening then... ;)

________________________________

From: l...@yahoogroups.com [mailto:l...@yahoogroups.com] On Behalf
Of Paul Curtis
Sent: 19 November 2009 10:47
To: l...@yahoogroups.com
Subject: RE: [lpc2000] LPC13xx

Hi,

We received our first LPC1300 board only yesterday; no, there's no
support
yet, but it will come.

-- Paul.

From: l...@yahoogroups.com
[mailto:l...@yahoogroups.com ] On
Behalf Of
Jakub Szumacher
Sent: 19 November 2008 10:44
To: l...@yahoogroups.com
Subject: [lpc2000] LPC13xx

Hello all,

Is available arm support package for CrossWorks to LPC13xx family?

best regards,
Jakub



(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )

I'm not the one that's constructing the LPC1300 package; right now I'm
working on packages for EFM32 and MC13324, among other things...

> From: l...@yahoogroups.com [mailto:l...@yahoogroups.com] On Behalf
Of Toby Harris
>=20
> Knowing how fast Paul works, I guess that means a LPC1300 BSP sometime
late this evening then... ;)

--
Paul Curtis, Rowley Associates Ltd=A0=A0 http://www.rowley.co.uk
CrossWorks V2 is out for LPC1700, LPC3100, LPC3200, SAM9, and more!

------------------------------------



(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )

Could you estimate when LPC13xx package will be ready?

(I'm wondering about buying this MCUs... but I need a soft to use them.)

Jakub

----- Original Message -----
From: Paul Curtis
To: l...@yahoogroups.com
Sent: Thursday, November 19, 2009 12:16 PM
Subject: RE: [lpc2000] LPC13xx

I'm not the one that's constructing the LPC1300 package; right now I'm
working on packages for EFM32 and MC13324, among other things...

> From: l...@yahoogroups.com [mailto:l...@yahoogroups.com] On Behalf
Of Toby Harris
>
> Knowing how fast Paul works, I guess that means a LPC1300 BSP sometime
late this evening then... ;)

--
Paul Curtis, Rowley Associates Ltd http://www.rowley.co.uk
CrossWorks V2 is out for LPC1700, LPC3100, LPC3200, SAM9, and more!



(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )

Jakub Szumacher wrote:
> Could you estimate when LPC13xx package will be ready?
>
> (I'm wondering about buying this MCUs... but I need a soft to use them.)
First of all, you can reduce the time you have to wait by ONE YEAR by
setting your computer's clock to the correct date.

It's 2009 now, not 2008.
------------------------------------



(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )

> Could you=A0estimate when LPC13xx package will be ready?

Sure I can estimate. Oh, you mean you want to know? I don't quite know
yet. Probably not very long.
=A0
Just a warning here: many boards (such as the Keil MCB1343 board) will come
only with a Cortex SWD connector and will only support SW-DP. We now have =
a
solution that will allow you to use the small SWD connector with, for
instance, the LPC1300 which has only a SW-DP and not the JTAG-DP port.
There will be a new release of CrossWorks which will support this along wit=
h
a hardware adapter board which is both a format converter (20-pin to 10-pin
Cortex) and a protocol converter which allows you to use, for instance, any
FTDI-based JTAG adapter with CrossWorks on SW-DP-only parts such as the
LPC1300, LPC1100, and EFM32 in true single wire mode.

Regards,

--
Paul Curtis, Rowley Associates Ltd=A0=A0 http://www.rowley.co.uk
CrossWorks V2 is out for LPC1700, LPC3100, LPC3200, SAM9, and more!

------------------------------------



(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )

Hi,
What is best method to realize software MCU reset in LPC21xx?

best regards
Jakub



(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )

Can you *PLEASE* set the RTC of your PC to the correct time ???

Jakub Szumacher schrieb:
> Hi,
>
>
> What is best method to realize software MCU reset in LPC21xx?
>
Not servicing the watchdog

Herbert



(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )

--- In l...@yahoogroups.com, groups@... wrote:
>
> Can you *PLEASE* set the RTC of your PC to the correct time ???
>
> Jakub Szumacher schrieb:
> >
> >
> > Hi,
> >
> >
> > What is best method to realize software MCU reset in LPC21xx?
> >
> Not servicing the watchdog
>
> Herbert
>

Some email software will allow you to move directly to trash those messages with an invalid date (too old or date in the future). It is helpful for trashing emails from those senders that want their email at the top of your list.

Better yet: never accept email from Yahoo Groups, GMAIL, HOTMAIL, etc. If they come in at all, they go right straight to Trash.

Very useful, this software stuff...

Richard

Richard

------------------------------------



(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )

Only way is to set watchdog.

void RESET (void){
WDTC = 0xFF;
WDMOD = 0x0F;
WDFEED = 0xAA;
WDFEED = 0x55;
}

--- In l...@yahoogroups.com, "Jakub Szumacher" wrote:
>
> Hi,
> What is best method to realize software MCU reset in LPC21xx?
>
> best regards
> Jakub
>

------------------------------------



(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )

> There will be a new release of CrossWorks which will support this along with
> a hardware adapter board which is both a format converter (20-pin to 10-pin
> Cortex) and a protocol converter which allows you to use, for instance, any
> FTDI-based JTAG adapter with CrossWorks on SW-DP-only parts such as the
> LPC1300, LPC1100, and EFM32 in true single wire mode.

That's nice to know, particularly that the Olimex FTDI-based devices will work as will ... they're rather slow but the price makes up for it. I've already bought a J-Link for SWD support (before I knew about the adapter), but it's nice to know that all the other JTAG adapters I have will still be usable within Crossworks on the newer chips.

------------------------------------



(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )