Sign in
Search lpc2000
Subscribe to lpc2000
lpc2000 by Keywords
2106 | ADC | ARM7 | Atmel | Bootloader | CAN | CrossStudio | CrossWorks | DDS | ECos | Ethernet | ETM | FIFO | FLASH | FPGA | GCC | GDB | GNU | GNUARM | GPIO | I2C | IAP | IAR | JTAG | Kickstart | LCD | Linux | LPC | LPC-E2294 | LPC2000 | LPC2100 | LPC2104 | Lpc2106 | Lpc210x | LPC2114 | LPC2119 | LPC2124 | LPC2129 | Lpc2138 | LPC213x | LPC21xx | LPC2210 | LPC2212 | LPC2214 | LPC2292 | LPC2294 | LPC2xxx | LPC3128 | MCB2100 | Olimex | Philips | PWM | Rowley | RTC | RTOS | SPI | SSP | UART | UART0 | UART1 | ULINK | USB | Watchdog | Wiggler
Ads
Discussion Groups
See Also
Discussion Groups | LPC2000 | JTAG for LPC2148
Discussion group dedicated to the Philips LPC2000 family of ARM MCUs
JTAG for LPC2148 - raju_nem - Nov 6 5:42:02 2009
I have lpc2148 from spj embedded systems.i try to use a JTAG parallel port for debugging.i made a ckt which in the below link,ckt is fine.what JTAG software i need to use for this ckt and lpc2148.i am using GNU arm gcc compiler on windows operating system.
in my lpc2148 board,JTAG pins are 10.
http://www.frozeneskimo.com/electronics/wp-content/uploads/Schematics/jtagwigglersch.png.
------------------------------------
______________________________
Stellaris® MCU Family: New Parts, New Package, New Price.
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
Re: JTAG for LPC2148 - raju_nem - Nov 6 5:51:53 2009
> I have lpc2148 from spj embedded systems.i try to use a JTAG parallel port for
debugging.i made a ckt which in the below link,ckt is fine.what JTAG software i need to
use for this ckt and lpc2148.i am using GNU arm gcc compiler on windows operating
system.
> in my lpc2148 board,JTAG pins are 10.
http://www.frozeneskimo.com/electronics/arm-tutorials/jtag-wiggler-clone/
--- In l...@yahoogroups.com, "raju_nem" wrote:
> I have lpc2148 from spj embedded systems.i try to use a JTAG parallel port for debugging.i made a ckt which in the below link,ckt is fine.what JTAG software i need to use for this ckt and lpc2148.i am using GNU arm gcc compiler on windows operating system.
> in my lpc2148 board,JTAG pins are 10.
>
> http://www.frozeneskimo.com/electronics/wp-content/uploads/Schematics/jtagwigglersch.png.
>
------------------------------------
______________________________
Stellaris® MCU Family: New Parts, New Package, New Price.
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
> in my lpc2148 board,JTAG pins are 10.
http://www.frozeneskimo.com/electronics/arm-tutorials/jtag-wiggler-clone/
--- In l...@yahoogroups.com, "raju_nem"
> I have lpc2148 from spj embedded systems.i try to use a JTAG parallel port for debugging.i made a ckt which in the below link,ckt is fine.what JTAG software i need to use for this ckt and lpc2148.i am using GNU arm gcc compiler on windows operating system.
> in my lpc2148 board,JTAG pins are 10.
>
> http://www.frozeneskimo.com/electronics/wp-content/uploads/Schematics/jtagwigglersch.png.
>
------------------------------------
______________________________
Stellaris® MCU Family: New Parts, New Package, New Price.
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
Re: JTAG for LPC2148 - leon Heller - Nov 6 10:15:28 2009
----- Original Message -----
From: "raju_nem"
To:
Sent: Friday, November 06, 2009 10:38 AM
Subject: [lpc2000] JTAG for LPC2148
>
> I have lpc2148 from spj embedded systems.i try to use a JTAG parallel port
> for debugging.i made a ckt which in the below link,ckt is fine.what JTAG
> software i need to use for this ckt and lpc2148.i am using GNU arm gcc
> compiler on windows operating system.
> in my lpc2148 board,JTAG pins are 10.
>
> http://www.frozeneskimo.com/electronics/wp-content/uploads/Schematics/jtagwigglersch.png.
If it's a Wiggler clone it will work with Rowley CrossWorks, and any other
software that supports the Wiggler.
Leon
------------------------------------
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
From: "raju_nem"
To:
Sent: Friday, November 06, 2009 10:38 AM
Subject: [lpc2000] JTAG for LPC2148
>
> I have lpc2148 from spj embedded systems.i try to use a JTAG parallel port
> for debugging.i made a ckt which in the below link,ckt is fine.what JTAG
> software i need to use for this ckt and lpc2148.i am using GNU arm gcc
> compiler on windows operating system.
> in my lpc2148 board,JTAG pins are 10.
>
> http://www.frozeneskimo.com/electronics/wp-content/uploads/Schematics/jtagwigglersch.png.
If it's a Wiggler clone it will work with Rowley CrossWorks, and any other
software that supports the Wiggler.
Leon
------------------------------------
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
Re: JTAG for LPC2148 - raju_nem - Nov 7 9:02:50 2009
Any body using this (link below)simple JTAG homemade schematic with successfully?i need a
software which support this below schematic.if any body have software,plz share in the
file section.Thanks indavance.
http://www.frozeneskimo.com/electronics/arm-tutorials/jtag-wiggler-clone/
--- In l...@yahoogroups.com, "leon Heller" wrote:
>
> ----- Original Message -----
> From: "raju_nem"
> To:
> Sent: Friday, November 06, 2009 10:38 AM
> Subject: [lpc2000] JTAG for LPC2148
> >
> >
> >
> > I have lpc2148 from spj embedded systems.i try to use a JTAG parallel port
> > for debugging.i made a ckt which in the below link,ckt is fine.what JTAG
> > software i need to use for this ckt and lpc2148.i am using GNU arm gcc
> > compiler on windows operating system.
> > in my lpc2148 board,JTAG pins are 10.
> >
> > http://www.frozeneskimo.com/electronics/wp-content/uploads/Schematics/jtagwigglersch.png.
>
> If it's a Wiggler clone it will work with Rowley CrossWorks, and any other
> software that supports the Wiggler.
>
> Leon
>
------------------------------------
______________________________
Stellaris® MCU Family: New Parts, New Package, New Price.
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
http://www.frozeneskimo.com/electronics/arm-tutorials/jtag-wiggler-clone/
--- In l...@yahoogroups.com, "leon Heller"
>
> ----- Original Message -----
> From: "raju_nem"
> To:
> Sent: Friday, November 06, 2009 10:38 AM
> Subject: [lpc2000] JTAG for LPC2148
> >
> >
> >
> > I have lpc2148 from spj embedded systems.i try to use a JTAG parallel port
> > for debugging.i made a ckt which in the below link,ckt is fine.what JTAG
> > software i need to use for this ckt and lpc2148.i am using GNU arm gcc
> > compiler on windows operating system.
> > in my lpc2148 board,JTAG pins are 10.
> >
> > http://www.frozeneskimo.com/electronics/wp-content/uploads/Schematics/jtagwigglersch.png.
>
> If it's a Wiggler clone it will work with Rowley CrossWorks, and any other
> software that supports the Wiggler.
>
> Leon
>
------------------------------------
______________________________
Stellaris® MCU Family: New Parts, New Package, New Price.
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )