Sign in
Search lpc2000
Subscribe to lpc2000
lpc2000 by Keywords
2106 | ADC | ARM7 | Atmel | Bootloader | CAN | CrossStudio | CrossWorks | DDS | ECos | Ethernet | ETM | FIFO | FLASH | FPGA | GCC | GDB | GNU | GNUARM | GPIO | I2C | IAP | IAR | JTAG | Kickstart | LCD | Linux | LPC | LPC-E2294 | LPC2000 | LPC2100 | LPC2104 | Lpc2106 | Lpc210x | LPC2114 | LPC2119 | LPC2124 | LPC2129 | Lpc2138 | LPC213x | LPC21xx | LPC2210 | LPC2212 | LPC2214 | LPC2292 | LPC2294 | LPC2xxx | LPC3128 | MCB2100 | Olimex | Philips | PWM | Rowley | RTC | RTOS | SPI | SSP | UART | UART0 | UART1 | ULINK | USB | Watchdog | Wiggler
Ads
Discussion Groups
See Also
Discussion Groups | LPC2000 | PINMODE effective for GPIO only?
Discussion group dedicated to the Philips LPC2000 family of ARM MCUs
PINMODE effective for GPIO only? - reich_wolfgang - Oct 9 13:20:47 2009
LPC24xx:
For GPIO port pins, does the PINMODE pull up/down setting also have effect when the pin is configured not for GPIO, but for other functions?
The manual says "The PINMODE registers control the on-chip pull-up/pull-down resistor feature for all GPIO ports."
I'm not sure if this means GPIO-accessible ports in general or only ports actually configured for GPIO function.
------------------------------------
______________________________
controlSUITE™ software. Comprehensive. Intuitive. Optimized.
Real-world software for real-time control. Details Here!
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
For GPIO port pins, does the PINMODE pull up/down setting also have effect when the pin is configured not for GPIO, but for other functions?
The manual says "The PINMODE registers control the on-chip pull-up/pull-down resistor feature for all GPIO ports."
I'm not sure if this means GPIO-accessible ports in general or only ports actually configured for GPIO function.
------------------------------------
______________________________
controlSUITE™ software. Comprehensive. Intuitive. Optimized.
Real-world software for real-time control. Details Here!
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
Re: PINMODE effective for GPIO only? - rolf_meeser - Oct 10 14:35:38 2009
Hi Wolfgang,
--- In l...@yahoogroups.com, "reich_wolfgang" wrote:
>
> LPC24xx:
> For GPIO port pins, does the PINMODE pull up/down setting also have effect when the pin is configured not for GPIO, but for other functions?
> The manual says "The PINMODE registers control the on-chip pull-up/pull-down resistor feature for all GPIO ports."
> I'm not sure if this means GPIO-accessible ports in general or only ports actually configured for GPIO function.
>
The PINMODE setting is independent of the PINSEL setting. The pull-ups/-downs can be used for instance when the pin is used as UART RX line.
Rolf
------------------------------------
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
--- In l...@yahoogroups.com, "reich_wolfgang"
>
> LPC24xx:
> For GPIO port pins, does the PINMODE pull up/down setting also have effect when the pin is configured not for GPIO, but for other functions?
> The manual says "The PINMODE registers control the on-chip pull-up/pull-down resistor feature for all GPIO ports."
> I'm not sure if this means GPIO-accessible ports in general or only ports actually configured for GPIO function.
>
The PINMODE setting is independent of the PINSEL setting. The pull-ups/-downs can be used for instance when the pin is used as UART RX line.
Rolf
------------------------------------
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )