Sign in

username:

password:



Not a member?

Search lpc2000



Search tips

Subscribe to lpc2000



lpc2000 by Keywords

2106 | ADC | ARM7 | Atmel | Bootloader | CAN | CrossStudio | CrossWorks | DDS | ECos | Ethernet | ETM | FIFO | FLASH | FPGA | GCC | GDB | GNU | GNUARM | GPIO | I2C | IAP | IAR | JTAG | Kickstart | LCD | Linux | LPC | LPC-E2294 | LPC2000 | LPC2100 | LPC2104 | Lpc2106 | Lpc210x | LPC2114 | LPC2119 | LPC2124 | LPC2129 | Lpc2138 | LPC213x | LPC21xx | LPC2210 | LPC2212 | LPC2214 | LPC2292 | LPC2294 | LPC2xxx | LPC3128 | MCB2100 | Olimex | Philips | PWM | Rowley | RTC | RTOS | SPI | SSP | UART | UART0 | UART1 | ULINK | USB | Watchdog | Wiggler


Ads

Discussion Groups

See Also

DSPFPGAElectronics

Discussion Groups | LPC2000 | Question on IAP write to flash, minimum count

Discussion group dedicated to the Philips LPC2000 family of ARM MCUs

Question on IAP write to flash, minimum count - stevec - Oct 1 19:52:43 2009


NXP user manual for 2106 says the IAP copy RAM to Flash command accepts a count of 256 to 4096 bytes. My code works properly for 512 bytes but a count of 256 yields an invalid count error. Is this
- error in user manual?
- caused by a too-old bootloader?
- hardware limitation?

Thanks in advance
steve

------------------------------------



(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )