2106 | ADC | ARM7 | Atmel | Bootloader | CAN | CrossStudio | CrossWorks | DDS | ECos | Ethernet | ETM | FIFO | FLASH | FPGA | GCC | GDB | GNU | GNUARM | GPIO | I2C | IAP | IAR | JTAG | Kickstart | LCD | Linux | LPC | LPC-E2294 | LPC2000 | LPC2100 | LPC2104 | Lpc2106 | Lpc210x | LPC2114 | LPC2119 | LPC2124 | LPC2129 | Lpc2138 | LPC213x | LPC21xx | LPC2210 | LPC2212 | LPC2214 | LPC2292 | LPC2294 | LPC2xxx | LPC3128 | MCB2100 | Olimex | Philips | PWM | Rowley | RTC | RTOS | SPI | SSP | UART | UART0 | UART1 | ULINK | USB | Watchdog | Wiggler

Hi:
I have a convoluted system. I am using Keil for
creating/compiling/debugging programs for the LPC2194. I am using the
Segger IAR j-link (purchased for use with IAR before I discovered Keil)
which works fine for debugging in RAM. I have started using the Segger
J-flash with a temp license to flash the device. that seems to work
fine. It erases, programs flash, etc. I generate the hex file from
within Keil. The problem is that I cannot debug with Keil uvision. The
disassembly window does not show the same data that what is programmed
by J-flash.

The thing is that the program runs from flash just fine, but I can't
debug. Any ideas???

Thanks for your responses.
------------------------------------



(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )