2106 | ADC | ARM7 | Atmel | Bootloader | CAN | CrossStudio | CrossWorks | DDS | ECos | Ethernet | ETM | FIFO | FLASH | FPGA | GCC | GDB | GNU | GNUARM | GPIO | I2C | IAP | IAR | JTAG | Kickstart | LCD | Linux | LPC | LPC-E2294 | LPC2000 | LPC2100 | LPC2104 | Lpc2106 | Lpc210x | LPC2114 | LPC2119 | LPC2124 | LPC2129 | Lpc2138 | LPC213x | LPC21xx | LPC2210 | LPC2212 | LPC2214 | LPC2292 | LPC2294 | LPC2xxx | LPC3128 | MCB2100 | Olimex | Philips | PWM | Rowley | RTC | RTOS | SPI | SSP | UART | UART0 | UART1 | ULINK | USB | Watchdog | Wiggler

Hi Friends,

I just stated on a new development using IAR 5.11 compiler and LPC2138
micro controller. And used the code provided by IAR
ARM/examples/NXP/LPC213x code to get started.=20

Could anyone please advise me on the following issues,

1. I was wondering whether can I the use the same files provided
under "ARM/examples/NXP/LPC213x/config" directory Flash.icf,
Flash.mac, RAM.ifc & AM.mac for my application OR better to modify it.

2. In that particular example "ARM/examples/NXP/LPC213x/" it uses a
generic startup file provided under \ARM\src\lib\arm\cstartup.s =96 My
question is whether can I use the same cstartup.s file OR Is it
advisable to get a suitable cstartup.s file for LPC2138. If that is
the case is there any place to download it.

Thanks In Advance
Venu
------------------------------------



(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )

Hi Friends,

I just stated on a new development using IAR 5.11 compiler and LPC2138
micro controller. And used the code provided by IAR
ARM/examples/NXP/LPC213x code to get started.

Could anyone please advise me on the following issues,

1. I was wondering whether can I the use the same files provided
under "ARM/examples/NXP/LPC213x/config" directory Flash.icf,
Flash.mac, RAM.ifc & AM.mac for my application OR better to modify it.

2. In that particular example "ARM/examples/NXP/LPC213x/" it uses a
generic startup file provided under \ARM\src\lib\arm\cstartup.s =96 My
question is whether can I use the same cstartup.s file OR Is it
advisable to get a suitable cstartup.s file for LPC2138. If that is
the case is there any place to download it.
In case if I want to write my own startup.s for LPC2138 using IAR ,
where Can I get the informations.

Thanks In Advance
Ve

------------------------------------



(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )

Hi mate,

in my project I use exactly the files from examples (startup code and
.ifc + .mac)

They work very fine.=20

--- In l...@yahoogroups.com, "venu_95" wrote:
>
> Hi Friends,
>=20
> I just stated on a new development using IAR 5.11 compiler and LPC2138
> micro controller. And used the code provided by IAR
> ARM/examples/NXP/LPC213x code to get started.=20
>=20
> Could anyone please advise me on the following issues,
>=20
> 1. I was wondering whether can I the use the same files provided
> under "ARM/examples/NXP/LPC213x/config" directory Flash.icf,
> Flash.mac, RAM.ifc & AM.mac for my application OR better to modify it.
>=20
> 2. In that particular example "ARM/examples/NXP/LPC213x/" it uses a
> generic startup file provided under \ARM\src\lib\arm\cstartup.s =96 My
> question is whether can I use the same cstartup.s file OR Is it
> advisable to get a suitable cstartup.s file for LPC2138. If that is
> the case is there any place to download it.
>=20
> Thanks In Advance
> Venu
>

------------------------------------



(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )