Sign in
Search lpc2000
Subscribe to lpc2000
lpc2000 by Keywords
2106 | ADC | ARM7 | Atmel | Bootloader | CAN | CrossStudio | CrossWorks | DDS | ECos | Ethernet | ETM | FIFO | FLASH | FPGA | GCC | GDB | GNU | GNUARM | GPIO | I2C | IAP | IAR | JTAG | Kickstart | LCD | Linux | LPC | LPC-E2294 | LPC2000 | LPC2100 | LPC2104 | Lpc2106 | Lpc210x | LPC2114 | LPC2119 | LPC2124 | LPC2129 | Lpc2138 | LPC213x | LPC21xx | LPC2210 | LPC2212 | LPC2214 | LPC2292 | LPC2294 | LPC2xxx | LPC3128 | MCB2100 | Olimex | Philips | PWM | Rowley | RTC | RTOS | SPI | SSP | UART | UART0 | UART1 | ULINK | USB | Watchdog | Wiggler
Ads
Discussion Groups
Discussion Groups | LPC2000 | Auto Flow Control @ Uart1 in LPC2368
Discussion group dedicated to the Philips LPC2000 family of ARM MCUs
Auto Flow Control @ Uart1 in LPC2368 - tayyaba_ch - Jun 4 3:10:12 2008
Hi
I am using LPC 2368 ad using auto flow control to communicate with
another LPC2368 @ Uart1,i am using 8 byte RX trigger level @ both
ends.i checked with oscilloscope ,data is not transferred when rts1 is
high.but still i am not getting whole data ...data is missing and
corrupt some time.
Anybody who ever worked with uart1 , auto flow control enabled.
Regards
------------------------------------
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
I am using LPC 2368 ad using auto flow control to communicate with
another LPC2368 @ Uart1,i am using 8 byte RX trigger level @ both
ends.i checked with oscilloscope ,data is not transferred when rts1 is
high.but still i am not getting whole data ...data is missing and
corrupt some time.
Anybody who ever worked with uart1 , auto flow control enabled.
Regards
------------------------------------
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
Re: Auto Flow Control @ Uart1 in LPC2368 - tayyaba_ch - Jun 20 7:48:01 2008
--- In l...@yahoogroups.com, "tayyaba_ch" wrote:
>
> Hi
> I am using LPC 2368 ad using auto flow control to communicate with
> another LPC2368 @ Uart1,i am using 8 byte RX trigger level @ both
> ends.i checked with oscilloscope ,data is not transferred when rts1 is
> high.but still i am not getting whole data ...data is missing and
> corrupt some time.
>
> Anybody who ever worked with uart1 , auto flow control enabled.
>
> Regards
>
I am Done ....there was some problem with my UART Library....
------------------------------------
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
>
> Hi
> I am using LPC 2368 ad using auto flow control to communicate with
> another LPC2368 @ Uart1,i am using 8 byte RX trigger level @ both
> ends.i checked with oscilloscope ,data is not transferred when rts1 is
> high.but still i am not getting whole data ...data is missing and
> corrupt some time.
>
> Anybody who ever worked with uart1 , auto flow control enabled.
>
> Regards
>
I am Done ....there was some problem with my UART Library....
------------------------------------
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )