Sign in
Search lpc2000
Subscribe to lpc2000
lpc2000 by Keywords
2106 | ADC | ARM7 | Atmel | Bootloader | CAN | CrossStudio | CrossWorks | DDS | ECos | Ethernet | ETM | FIFO | FLASH | FPGA | GCC | GDB | GNU | GNUARM | GPIO | I2C | IAP | IAR | JTAG | Kickstart | LCD | Linux | LPC | LPC-E2294 | LPC2000 | LPC2100 | LPC2104 | Lpc2106 | Lpc210x | LPC2114 | LPC2119 | LPC2124 | LPC2129 | Lpc2138 | LPC213x | LPC21xx | LPC2210 | LPC2212 | LPC2214 | LPC2292 | LPC2294 | LPC2xxx | LPC3128 | MCB2100 | Olimex | Philips | PWM | Rowley | RTC | RTOS | SPI | SSP | UART | UART0 | UART1 | ULINK | USB | Watchdog | Wiggler
Sponsor
Ads
Discussion Groups
See Also
Discussion Groups | LPC2000 | ULink cann't connect with embedded LPC2468 OEM board
Discussion group dedicated to the Philips LPC2000 family of ARM MCUs
ULink cann't connect with embedded LPC2468 OEM board - wilnfl - Mar 21 5:25:03 2007
I have a embedded artists OEM board. I connect it with keil IDE through
ULINK adapter, when I click the load button in keil, a message box
disply on screen: "Cloud not stop ARM device! please check the JTAG
cable". I am really sure that the ULink is ok, because I can use it
debug the keil 2140 board. I check the jump on board. the Enable JTAG
is closed, so it is correct. I don't know what is the reason. do i need
change the ULINK to ULINK2?
anyone has any ideals? Thanks in advance.
______________________________
controlSUITE™ software. Comprehensive. Intuitive. Optimized.
Real-world software for real-time control. Details Here!
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
ULINK adapter, when I click the load button in keil, a message box
disply on screen: "Cloud not stop ARM device! please check the JTAG
cable". I am really sure that the ULink is ok, because I can use it
debug the keil 2140 board. I check the jump on board. the Enable JTAG
is closed, so it is correct. I don't know what is the reason. do i need
change the ULINK to ULINK2?
anyone has any ideals? Thanks in advance.
______________________________
controlSUITE™ software. Comprehensive. Intuitive. Optimized.
Real-world software for real-time control. Details Here!
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
Re: ULink cann't connect with embedded LPC2468 OEM board - Leon - Mar 21 5:43:34 2007
----- Original Message -----
From: "wilnfl"
To:
Sent: Wednesday, March 21, 2007 9:22 AM
Subject: [lpc2000] ULink cann't connect with embedded LPC2468 OEM board
>I have a embedded artists OEM board. I connect it with keil IDE through
> ULINK adapter, when I click the load button in keil, a message box
> disply on screen: "Cloud not stop ARM device! please check the JTAG
> cable". I am really sure that the ULink is ok, because I can use it
> debug the keil 2140 board. I check the jump on board. the Enable JTAG
> is closed, so it is correct. I don't know what is the reason. do i need
> change the ULINK to ULINK2?
>
> anyone has any ideals? Thanks in advance.
You could try contacting EA, their customer support is pretty good.
Leon
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
From: "wilnfl"
To:
Sent: Wednesday, March 21, 2007 9:22 AM
Subject: [lpc2000] ULink cann't connect with embedded LPC2468 OEM board
>I have a embedded artists OEM board. I connect it with keil IDE through
> ULINK adapter, when I click the load button in keil, a message box
> disply on screen: "Cloud not stop ARM device! please check the JTAG
> cable". I am really sure that the ULink is ok, because I can use it
> debug the keil 2140 board. I check the jump on board. the Enable JTAG
> is closed, so it is correct. I don't know what is the reason. do i need
> change the ULINK to ULINK2?
>
> anyone has any ideals? Thanks in advance.
You could try contacting EA, their customer support is pretty good.
Leon
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
Re: ULink cann't connect with embedded LPC2468 OEM board - wilnfl - Mar 23 0:17:17 2007
Thank you from your reply. I will try to get answer from keil and EA.
--- In l...@yahoogroups.com, "Leon" wrote:
>
> ----- Original Message -----
> From: "wilnfl"
> To:
> Sent: Wednesday, March 21, 2007 9:22 AM
> Subject: [lpc2000] ULink cann't connect with embedded LPC2468 OEM
board
> >I have a embedded artists OEM board. I connect it with keil IDE
through
> > ULINK adapter, when I click the load button in keil, a message
box
> > disply on screen: "Cloud not stop ARM device! please check the
JTAG
> > cable". I am really sure that the ULink is ok, because I can use
it
> > debug the keil 2140 board. I check the jump on board. the Enable
JTAG
> > is closed, so it is correct. I don't know what is the reason. do
i need
> > change the ULINK to ULINK2?
> >
> > anyone has any ideals? Thanks in advance.
>
> You could try contacting EA, their customer support is pretty good.
>
> Leon
>
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
--- In l...@yahoogroups.com, "Leon"
>
> ----- Original Message -----
> From: "wilnfl"
> To:
> Sent: Wednesday, March 21, 2007 9:22 AM
> Subject: [lpc2000] ULink cann't connect with embedded LPC2468 OEM
board
> >I have a embedded artists OEM board. I connect it with keil IDE
through
> > ULINK adapter, when I click the load button in keil, a message
box
> > disply on screen: "Cloud not stop ARM device! please check the
JTAG
> > cable". I am really sure that the ULink is ok, because I can use
it
> > debug the keil 2140 board. I check the jump on board. the Enable
JTAG
> > is closed, so it is correct. I don't know what is the reason. do
i need
> > change the ULINK to ULINK2?
> >
> > anyone has any ideals? Thanks in advance.
>
> You could try contacting EA, their customer support is pretty good.
>
> Leon
>
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )