2106 | ADC | ARM7 | Atmel | Bootloader | CAN | CrossStudio | CrossWorks | DDS | ECos | Ethernet | ETM | FIFO | FLASH | FPGA | GCC | GDB | GNU | GNUARM | GPIO | I2C | IAP | IAR | JTAG | Kickstart | LCD | Linux | LPC | LPC-E2294 | LPC2000 | LPC2100 | LPC2104 | Lpc2106 | Lpc210x | LPC2114 | LPC2119 | LPC2124 | LPC2129 | Lpc2138 | LPC213x | LPC21xx | LPC2210 | LPC2212 | LPC2214 | LPC2292 | LPC2294 | LPC2xxx | LPC3128 | MCB2100 | Olimex | Philips | PWM | Rowley | RTC | RTOS | SPI | SSP | UART | UART0 | UART1 | ULINK | USB | Watchdog | Wiggler

Hello everyone,

I have recently been considering the LPC23XX family for one of my
future projects. However, it would be essential to me that this family
could support the wiggler jtag debug interface (due to its low cost,
mainly).
Thus, I would like to know if anyone has has had any success with this
setup, and could confirm that the wiggler works with the new LPC23XX
family. I suspect it is possible, however Macraigor's website doesn't
list it as being supported by the wiggler.

Thanks in advance.
______________________________
Stellaris® MCU Family: New Parts, New Package, New Price.


(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )