Sign in
Search lpc2000
Subscribe to lpc2000
lpc2000 by Keywords
2106 | ADC | ARM7 | Atmel | Bootloader | CAN | CrossStudio | CrossWorks | DDS | ECos | Ethernet | ETM | FIFO | FLASH | FPGA | GCC | GDB | GNU | GNUARM | GPIO | I2C | IAP | IAR | JTAG | Kickstart | LCD | Linux | LPC | LPC-E2294 | LPC2000 | LPC2100 | LPC2104 | Lpc2106 | Lpc210x | LPC2114 | LPC2119 | LPC2124 | LPC2129 | Lpc2138 | LPC213x | LPC21xx | LPC2210 | LPC2212 | LPC2214 | LPC2292 | LPC2294 | LPC2xxx | LPC3128 | MCB2100 | Olimex | Philips | PWM | Rowley | RTC | RTOS | SPI | SSP | UART | UART0 | UART1 | ULINK | USB | Watchdog | Wiggler
Ads
Discussion Groups
See Also
Discussion Groups | LPC2000 | LPC213X - Watchdog and IAR JLink
Discussion group dedicated to the Philips LPC2000 family of ARM MCUs
LPC213X - Watchdog and IAR JLink - braintechsrl - Nov 14 7:45:48 2006
Hello world.
I'm at the end of a project and I've started using the watchdog
(disabled during debug).
When I need to make some changes to the program I found extemely hard
to gain access to the board through the JLink. (With the watchdog
disabled I've no problem)
It seems that after resetting the board it cannot download the flash
loader because the watchdog stops the work.
Is it necessry to setup a very long watchdog reload value in the macro
file to prevent the watchdog to expire?
Thanks
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
I'm at the end of a project and I've started using the watchdog
(disabled during debug).
When I need to make some changes to the program I found extemely hard
to gain access to the board through the JLink. (With the watchdog
disabled I've no problem)
It seems that after resetting the board it cannot download the flash
loader because the watchdog stops the work.
Is it necessry to setup a very long watchdog reload value in the macro
file to prevent the watchdog to expire?
Thanks
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )