2106 | ADC | ARM7 | Atmel | Bootloader | CAN | CrossStudio | CrossWorks | DDS | ECos | Ethernet | ETM | FIFO | FLASH | FPGA | GCC | GDB | GNU | GNUARM | GPIO | I2C | IAP | IAR | JTAG | Kickstart | LCD | Linux | LPC | LPC-E2294 | LPC2000 | LPC2100 | LPC2104 | Lpc2106 | Lpc210x | LPC2114 | LPC2119 | LPC2124 | LPC2129 | Lpc2138 | LPC213x | LPC21xx | LPC2210 | LPC2212 | LPC2214 | LPC2292 | LPC2294 | LPC2xxx | LPC3128 | MCB2100 | Olimex | Philips | PWM | Rowley | RTC | RTOS | SPI | SSP | UART | UART0 | UART1 | ULINK | USB | Watchdog | Wiggler

Hi, I just started using an ARM7 and the gnu tools. I also got some programms running/debugged in ram but I have problems with flash debugging. If I connect to the device having a elf file for flash loaded I get Errors like that: "(Internal Error: pc 0x0 in read in psysmtab, but not in symtab)" and downloading this file to flash caused an OCDLibremote Error "Memory Write at 0 len c5 Error : Target Bus Error", I think this is because gdb is trieing to write to flash driectly not using the IAP-Funktions. I also tryed loading the programm into flash using the Philips Flash utility, programm is running well from flash but. Can someone tell me how to debugg using gdb/insight with programm in flash?

(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )