Sign in
Search lpc2000
Subscribe to lpc2000
lpc2000 by Keywords
2106 | ADC | ARM7 | Atmel | Bootloader | CAN | CrossStudio | CrossWorks | DDS | ECos | Ethernet | ETM | FIFO | FLASH | FPGA | GCC | GDB | GNU | GNUARM | GPIO | I2C | IAP | IAR | JTAG | Kickstart | LCD | Linux | LPC | LPC-E2294 | LPC2000 | LPC2100 | LPC2104 | Lpc2106 | Lpc210x | LPC2114 | LPC2119 | LPC2124 | LPC2129 | Lpc2138 | LPC213x | LPC21xx | LPC2210 | LPC2212 | LPC2214 | LPC2292 | LPC2294 | LPC2xxx | LPC3128 | MCB2100 | Olimex | Philips | PWM | Rowley | RTC | RTOS | SPI | SSP | UART | UART0 | UART1 | ULINK | USB | Watchdog | Wiggler
Ads
Discussion Groups
See Also
Discussion Groups | LPC2000 | IAR and Wiggler JTAG emulator
Discussion group dedicated to the Philips LPC2000 family of ARM MCUs
IAR and Wiggler JTAG emulator - pberna2003 - Apr 6 9:14:37 2006
Dear all
I'm training to use IAR V4.31A for ARM with wiggler. After
downloading and installing the MAC_MOT.SYS driver (I got it from
Macraigor at http://www.macraigor.com/downloads/ocd_dbgr.exe)
I installed the driver. Then I have started the IAR C-SPY. Now it
recognized the new driver but it sends the error message OCDemon
Error, Internal error 43, and the debugging process doesn't start
For your info, if I try to use the same Wiggler emulator with the
Rowley IDE, all work properly.
1) Any idea about the reason of this error using IAR ?
2) Do anyone know if IAR really support Wiggler ?
Best Regards
Paolo
______________________________
Stellaris® MCU Family: New Parts, New Package, New Price.
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
I'm training to use IAR V4.31A for ARM with wiggler. After
downloading and installing the MAC_MOT.SYS driver (I got it from
Macraigor at http://www.macraigor.com/downloads/ocd_dbgr.exe)
I installed the driver. Then I have started the IAR C-SPY. Now it
recognized the new driver but it sends the error message OCDemon
Error, Internal error 43, and the debugging process doesn't start
For your info, if I try to use the same Wiggler emulator with the
Rowley IDE, all work properly.
1) Any idea about the reason of this error using IAR ?
2) Do anyone know if IAR really support Wiggler ?
Best Regards
Paolo
______________________________
Stellaris® MCU Family: New Parts, New Package, New Price.
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
LPC214x - minimal USB schematic - Marko Pavlin - Apr 6 9:51:38 2006
Hello!
What is minimal external circuit for LPC214x to have proper USB connection?
Thanks!
Marko
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
What is minimal external circuit for LPC214x to have proper USB connection?
Thanks!
Marko
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
Re: IAR and Wiggler JTAG emulator - haare_in_der_dusche - Apr 6 10:05:51 2006
> I'm training to use IAR V4.31A for ARM with wiggler. After
> downloading and installing the MAC_MOT.SYS driver (I got it from
> Macraigor at http://www.macraigor.com/downloads/ocd_dbgr.exe)
>
> I installed the driver. Then I have started the IAR C-SPY. Now it
> recognized the new driver but it sends the error message OCDemon
> Error, Internal error 43, and the debugging process doesn't start
This might be caused by a missing connection inside your "wiggler"
clone. Connect pins 8 and 15, then error 43 should go away.
But that's not everything.
Ocdemon seems to be a heap of crap when used on a serious windows
system. It's close to dysfunctional and throws error message after error
message. And it's way slow. Real slow.
Maybe it works better on a pseudo windows system (95/98/me that is).
> For your info, if I try to use the same Wiggler emulator with the
> Rowley IDE, all work properly.
That is at least ONE reason to stay with Rowley,
> 1) Any idea about the reason of this error using IAR ?
That's not an IAR related problem, but a problem related to Macraigor's
ineptness at creating working software.
> 2) Do anyone know if IAR really support Wiggler ?
see above.
___________________________________________________________
Telefonate ohne weitere Kosten vom PC zum PC: http://messenger.yahoo.de
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
> downloading and installing the MAC_MOT.SYS driver (I got it from
> Macraigor at http://www.macraigor.com/downloads/ocd_dbgr.exe)
>
> I installed the driver. Then I have started the IAR C-SPY. Now it
> recognized the new driver but it sends the error message OCDemon
> Error, Internal error 43, and the debugging process doesn't start
This might be caused by a missing connection inside your "wiggler"
clone. Connect pins 8 and 15, then error 43 should go away.
But that's not everything.
Ocdemon seems to be a heap of crap when used on a serious windows
system. It's close to dysfunctional and throws error message after error
message. And it's way slow. Real slow.
Maybe it works better on a pseudo windows system (95/98/me that is).
> For your info, if I try to use the same Wiggler emulator with the
> Rowley IDE, all work properly.
That is at least ONE reason to stay with Rowley,
> 1) Any idea about the reason of this error using IAR ?
That's not an IAR related problem, but a problem related to Macraigor's
ineptness at creating working software.
> 2) Do anyone know if IAR really support Wiggler ?
see above.
___________________________________________________________
Telefonate ohne weitere Kosten vom PC zum PC: http://messenger.yahoo.de
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
Re: LPC214x - minimal USB schematic - "ian.scanlon" - Apr 6 10:23:41 2006
--- In l...@yahoogroups.com, Marko Pavlin wrote:
>
> Hello!
>
> What is minimal external circuit for LPC214x to have proper USB
connection?
>
> Thanks!
> Marko
>
See the Olimex design as a refrence.
http://www.olimex.com/dev/pdf/LPC-P2148.pdf
You need 2x 33Ohm in series, 2x18pf to gnd and a 1.5K pullup. No
more, no less.
Ian
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
>
> Hello!
>
> What is minimal external circuit for LPC214x to have proper USB
connection?
>
> Thanks!
> Marko
>
See the Olimex design as a refrence.
http://www.olimex.com/dev/pdf/LPC-P2148.pdf
You need 2x 33Ohm in series, 2x18pf to gnd and a 1.5K pullup. No
more, no less.
Ian
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
Re: IAR and Wiggler JTAG emulator - Leon Heller - Apr 6 10:48:34 2006
----- Original Message -----
From: "pberna2003"
To:
Sent: Thursday, April 06, 2006 2:10 PM
Subject: [lpc2000] IAR and Wiggler JTAG emulator
> Dear all
>
> I'm training to use IAR V4.31A for ARM with wiggler. After
> downloading and installing the MAC_MOT.SYS driver (I got it from
> Macraigor at http://www.macraigor.com/downloads/ocd_dbgr.exe)
>
> I installed the driver. Then I have started the IAR C-SPY. Now it
> recognized the new driver but it sends the error message OCDemon
> Error, Internal error 43, and the debugging process doesn't start
>
> For your info, if I try to use the same Wiggler emulator with the
> Rowley IDE, all work properly.
>
> 1) Any idea about the reason of this error using IAR ?
> 2) Do anyone know if IAR really support Wiggler ?
Are you using a genuine Wiggler or a clone?
Leon
--
Leon Heller, G1HSM
l...@bulldoghome.com
http://www.geocities.com/leon_heller
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
From: "pberna2003"
To:
Sent: Thursday, April 06, 2006 2:10 PM
Subject: [lpc2000] IAR and Wiggler JTAG emulator
> Dear all
>
> I'm training to use IAR V4.31A for ARM with wiggler. After
> downloading and installing the MAC_MOT.SYS driver (I got it from
> Macraigor at http://www.macraigor.com/downloads/ocd_dbgr.exe)
>
> I installed the driver. Then I have started the IAR C-SPY. Now it
> recognized the new driver but it sends the error message OCDemon
> Error, Internal error 43, and the debugging process doesn't start
>
> For your info, if I try to use the same Wiggler emulator with the
> Rowley IDE, all work properly.
>
> 1) Any idea about the reason of this error using IAR ?
> 2) Do anyone know if IAR really support Wiggler ?
Are you using a genuine Wiggler or a clone?
Leon
--
Leon Heller, G1HSM
l...@bulldoghome.com
http://www.geocities.com/leon_heller
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
Re: IAR and Wiggler JTAG emulator - pberna2003 - Apr 10 5:49:42 2006
--- In l...@yahoogroups.com, "Leon Heller"
wrote:
>
> ----- Original Message -----
> From: "pberna2003"
> To:
> Sent: Thursday, April 06, 2006 2:10 PM
> Subject: [lpc2000] IAR and Wiggler JTAG emulator
> > Dear all
> >
> > I'm training to use IAR V4.31A for ARM with wiggler. After
> > downloading and installing the MAC_MOT.SYS driver (I got it from
> > Macraigor at http://www.macraigor.com/downloads/ocd_dbgr.exe)
> >
> > I installed the driver. Then I have started the IAR C-SPY. Now
it
> > recognized the new driver but it sends the error message OCDemon
> > Error, Internal error 43, and the debugging process doesn't start
> >
> > For your info, if I try to use the same Wiggler emulator with
the
> > Rowley IDE, all work properly.
> >
> > 1) Any idea about the reason of this error using IAR ?
> > 2) Do anyone know if IAR really support Wiggler ?
>
> Are you using a genuine Wiggler or a clone?
>
> Leon
> --
> Leon Heller, G1HSM
> leon.heller@...
> http://www.geocities.com/leon_heller
>
Dear Leon
I'm using the Hitex Hitop-link ARM. It is regognized as wiggler
emulator by Rowley Crosswork and by HI-JTAG V0.2 too without any
problem. I try also to connect pin 8 to pin 15 of the parallel port
without any success. It seams the OCD commander doesn't recognize
the dongle.
Thank you in advance for any additional idea
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
wrote:
>
> ----- Original Message -----
> From: "pberna2003"
> To:
> Sent: Thursday, April 06, 2006 2:10 PM
> Subject: [lpc2000] IAR and Wiggler JTAG emulator
> > Dear all
> >
> > I'm training to use IAR V4.31A for ARM with wiggler. After
> > downloading and installing the MAC_MOT.SYS driver (I got it from
> > Macraigor at http://www.macraigor.com/downloads/ocd_dbgr.exe)
> >
> > I installed the driver. Then I have started the IAR C-SPY. Now
it
> > recognized the new driver but it sends the error message OCDemon
> > Error, Internal error 43, and the debugging process doesn't start
> >
> > For your info, if I try to use the same Wiggler emulator with
the
> > Rowley IDE, all work properly.
> >
> > 1) Any idea about the reason of this error using IAR ?
> > 2) Do anyone know if IAR really support Wiggler ?
>
> Are you using a genuine Wiggler or a clone?
>
> Leon
> --
> Leon Heller, G1HSM
> leon.heller@...
> http://www.geocities.com/leon_heller
>
Dear Leon
I'm using the Hitex Hitop-link ARM. It is regognized as wiggler
emulator by Rowley Crosswork and by HI-JTAG V0.2 too without any
problem. I try also to connect pin 8 to pin 15 of the parallel port
without any success. It seams the OCD commander doesn't recognize
the dongle.
Thank you in advance for any additional idea
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
Re: Re: IAR and Wiggler JTAG emulator - Leon Heller - Apr 10 6:14:40 2006
----- Original Message -----
From: "pberna2003"
To:
Sent: Monday, April 10, 2006 10:48 AM
Subject: [lpc2000] Re: IAR and Wiggler JTAG emulator
> --- In l...@yahoogroups.com, "Leon Heller"
> wrote:
>>
>> ----- Original Message -----
>> From: "pberna2003"
>> To:
>> Sent: Thursday, April 06, 2006 2:10 PM
>> Subject: [lpc2000] IAR and Wiggler JTAG emulator
>> > Dear all
>> >
>> > I'm training to use IAR V4.31A for ARM with wiggler. After
>> > downloading and installing the MAC_MOT.SYS driver (I got it from
>> > Macraigor at http://www.macraigor.com/downloads/ocd_dbgr.exe)
>> >
>> > I installed the driver. Then I have started the IAR C-SPY. Now
> it
>> > recognized the new driver but it sends the error message OCDemon
>> > Error, Internal error 43, and the debugging process doesn't start
>> >
>> > For your info, if I try to use the same Wiggler emulator with
> the
>> > Rowley IDE, all work properly.
>> >
>> > 1) Any idea about the reason of this error using IAR ?
>> > 2) Do anyone know if IAR really support Wiggler ?
>>
>> Are you using a genuine Wiggler or a clone?
>>
>> Leon
>> --
>> Leon Heller, G1HSM
>> leon.heller@...
>> http://www.geocities.com/leon_heller
>>
> Dear Leon
>
> I'm using the Hitex Hitop-link ARM. It is regognized as wiggler
> emulator by Rowley Crosswork and by HI-JTAG V0.2 too without any
> problem. I try also to connect pin 8 to pin 15 of the parallel port
> without any success. It seams the OCD commander doesn't recognize
> the dongle.
>
> Thank you in advance for any additional idea
Sorry, I can't think of anything. My home-made JTAG works OK with OCD
Commander and CrossWorks. Contact IAR and see what they say.
Leon
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
From: "pberna2003"
To:
Sent: Monday, April 10, 2006 10:48 AM
Subject: [lpc2000] Re: IAR and Wiggler JTAG emulator
> --- In l...@yahoogroups.com, "Leon Heller"
> wrote:
>>
>> ----- Original Message -----
>> From: "pberna2003"
>> To:
>> Sent: Thursday, April 06, 2006 2:10 PM
>> Subject: [lpc2000] IAR and Wiggler JTAG emulator
>> > Dear all
>> >
>> > I'm training to use IAR V4.31A for ARM with wiggler. After
>> > downloading and installing the MAC_MOT.SYS driver (I got it from
>> > Macraigor at http://www.macraigor.com/downloads/ocd_dbgr.exe)
>> >
>> > I installed the driver. Then I have started the IAR C-SPY. Now
> it
>> > recognized the new driver but it sends the error message OCDemon
>> > Error, Internal error 43, and the debugging process doesn't start
>> >
>> > For your info, if I try to use the same Wiggler emulator with
> the
>> > Rowley IDE, all work properly.
>> >
>> > 1) Any idea about the reason of this error using IAR ?
>> > 2) Do anyone know if IAR really support Wiggler ?
>>
>> Are you using a genuine Wiggler or a clone?
>>
>> Leon
>> --
>> Leon Heller, G1HSM
>> leon.heller@...
>> http://www.geocities.com/leon_heller
>>
> Dear Leon
>
> I'm using the Hitex Hitop-link ARM. It is regognized as wiggler
> emulator by Rowley Crosswork and by HI-JTAG V0.2 too without any
> problem. I try also to connect pin 8 to pin 15 of the parallel port
> without any success. It seams the OCD commander doesn't recognize
> the dongle.
>
> Thank you in advance for any additional idea
Sorry, I can't think of anything. My home-made JTAG works OK with OCD
Commander and CrossWorks. Contact IAR and see what they say.
Leon
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
RE: Re: IAR and Wiggler JTAG emulator - Karim Virani - Apr 10 16:15:42 2006
I'd suggest you download H-Jtag - rock solid with IAR's RDI selection:
http://twentyone.blogchina.com/
If you're using the Olimex wiggler and have trouble, there's an earlier post on how to configure it.
Karim
-----Original Message-----
From: l...@yahoogroups.com [mailto:l...@yahoogroups.com]On Behalf
Of pberna2003
Sent: Monday, April 10, 2006 4:49 AM
To: l...@yahoogroups.com
Subject: [lpc2000] Re: IAR and Wiggler JTAG emulator
--- In l...@yahoogroups.com, "Leon Heller"
wrote:
>
> ----- Original Message -----
> From: "pberna2003"
> To:
> Sent: Thursday, April 06, 2006 2:10 PM
> Subject: [lpc2000] IAR and Wiggler JTAG emulator
> > Dear all
> >
> > I'm training to use IAR V4.31A for ARM with wiggler. After
> > downloading and installing the MAC_MOT.SYS driver (I got it from
> > Macraigor at http://www.macraigor.com/downloads/ocd_dbgr.exe)
> >
> > I installed the driver. Then I have started the IAR C-SPY. Now
it
> > recognized the new driver but it sends the error message OCDemon
> > Error, Internal error 43, and the debugging process doesn't start
> >
> > For your info, if I try to use the same Wiggler emulator with
the
> > Rowley IDE, all work properly.
> >
> > 1) Any idea about the reason of this error using IAR ?
> > 2) Do anyone know if IAR really support Wiggler ?
>
> Are you using a genuine Wiggler or a clone?
>
> Leon
> --
> Leon Heller, G1HSM
> leon.heller@...
> http://www.geocities.com/leon_heller
>
Dear Leon
I'm using the Hitex Hitop-link ARM. It is regognized as wiggler
emulator by Rowley Crosswork and by HI-JTAG V0.2 too without any
problem. I try also to connect pin 8 to pin 15 of the parallel port
without any success. It seams the OCD commander doesn't recognize
the dongle.
Thank you in advance for any additional idea
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )
http://twentyone.blogchina.com/
If you're using the Olimex wiggler and have trouble, there's an earlier post on how to configure it.
Karim
-----Original Message-----
From: l...@yahoogroups.com [mailto:l...@yahoogroups.com]On Behalf
Of pberna2003
Sent: Monday, April 10, 2006 4:49 AM
To: l...@yahoogroups.com
Subject: [lpc2000] Re: IAR and Wiggler JTAG emulator
--- In l...@yahoogroups.com, "Leon Heller"
wrote:
>
> ----- Original Message -----
> From: "pberna2003"
> To:
> Sent: Thursday, April 06, 2006 2:10 PM
> Subject: [lpc2000] IAR and Wiggler JTAG emulator
> > Dear all
> >
> > I'm training to use IAR V4.31A for ARM with wiggler. After
> > downloading and installing the MAC_MOT.SYS driver (I got it from
> > Macraigor at http://www.macraigor.com/downloads/ocd_dbgr.exe)
> >
> > I installed the driver. Then I have started the IAR C-SPY. Now
it
> > recognized the new driver but it sends the error message OCDemon
> > Error, Internal error 43, and the debugging process doesn't start
> >
> > For your info, if I try to use the same Wiggler emulator with
the
> > Rowley IDE, all work properly.
> >
> > 1) Any idea about the reason of this error using IAR ?
> > 2) Do anyone know if IAR really support Wiggler ?
>
> Are you using a genuine Wiggler or a clone?
>
> Leon
> --
> Leon Heller, G1HSM
> leon.heller@...
> http://www.geocities.com/leon_heller
>
Dear Leon
I'm using the Hitex Hitop-link ARM. It is regognized as wiggler
emulator by Rowley Crosswork and by HI-JTAG V0.2 too without any
problem. I try also to connect pin 8 to pin 15 of the parallel port
without any success. It seams the OCD commander doesn't recognize
the dongle.
Thank you in advance for any additional idea
(You need to be a member of lpc2000 -- send a blank email to lpc2000-subscribe@yahoogroups.com )