Accelerometer | ADC | ADXL | Adxl20 | AVR | BasicStamp | BX-35 | BX28 | BX35 | COM3 | Compiler | Downloader | EEPROM | Electromagnet | GetADC | GP2D1 | GPS | I2C | IDE | Keypad | LCD | LCD+ | MIDI | Motors | Multitasking | Netmedia | Networking | PCB | PID | PlaySound | PWM | Relays | RTC | Servo | ShiftOut | SitePlayer | SPI | Stack | Timer | USB

Re: Digest Number 2081

Chuck, Does one need to be in FL to do this job. I have been working on a Inclinometer/Compass for a project for a product I am developing. It is PIC based and a prototype ...

Faster PulseIn   [2 Articles]

Hi Is there anyway to speed up readings with PulseIn? I'm using an ADXL202 from AnalogueDevices. T2 is set to 1kHz so in theory I should get a reading every 1mS, is ...

ADXL202EB question   [4 Articles]

Hello, Has anyone finally used the ADXL202EB in any of his projects?Tom have you yet give it a shot? ...

Re: inclinometers using basicX24   [3 Articles]

naimead, I've played with AD's ADXL202 two-axis and freescale (formally Motorola)'s three-axis accelerometers and I'm about to test Parallax's Memsic 2125 vers...

ADC & Calculations   [2 Articles]

Hi there I have been trying for the last weeks to get different accelerometers and gyro's to work together with my BX24. Finally I have got the board from...

Re: BX24 & ADXL202EB analog reading   [2 Articles]

Hi kjellosan, Glad to hear that you got the 202EB to BX-24 working in PWM mode. The datasheet states "An analog voltage can be obtained either by buffering th...

BX24 & ADXL202EB   [9 Articles]

Hi There I am trying to learn how to do some ADC conversions, but nothing of what I try seems to work. Today I got an ADXL202EB (Analog Devices Accelero...

Rotomotion Gyro and accelerometer 2 DOF   [5 Articles]

Hi there I am trying to read the signals from the Z board of the rotomotion part. It is an accelerometer and a gyro. I connect this board's pins directly ...

looking for PCBExpress component   [2 Articles]

I am looking for a PCBExpress component drawing for an 8 terminal Ceramic Leadless Chip Carrier (LCC) for use with an ADXL202. According to Analog Devices this is...

Re: Digest Number 1762   [2 Articles]

hi, i hope this helps. changing the duty cycle changes the length of time a pulse is pos. or neg. , but NOT the speed of the frequency or in your case the number ...

adxl202 - improving reading rate   [3 Articles]

I am experimenting with an ADXL202. I have been testing it with the two example programs DisplayAngle and DisplayAcceleration. My problem is that I only ge...

adxl202   [7 Articles]

I have just bought an ADXL202 accelerometer. I bought it because I saw that there is an example application for the BX-24 for this accelerometer. But in the appli...

Sensor from SiliconSensing   [3 Articles]

Hi I am looking for some help with gyros/accelerometers. my project is logging the flights of my flying wings (radio controlled), and stabilize the plane if t...

Re: BasicX Commands

From: Trevor Pinkney <> > Raymond Irving wrote: >> >> [...] >>Also... How about supporting custom classs objects? >> >>' class module >>Class MyClass ...

Re: Speed? (was Continued problems with pseudo networking)

Ken wrote: > Doug, you'll be happy to know that your code does work. > I guess it IS all in the timing! Cool ... I guess the burning question is why doesn't...

Re: Non standard GPS

Haek wrote: > I guess the problem I can't fiure out is in the Sirf data > sentence, there's 2 15 bit pieces. How do I generate those? It looks like the Sirf...

Re: Fw: pitch, roll sensing   [2 Articles]

I am going to use (2)Tokin CG-16D gyros and (1)Analog ADXL202 accelerometer. Mark --- "Wolfe Digital Systems, Inc." <> wrote: > > Hey, > > What are you gu...

Re: need some ideas   [5 Articles]

From: "Wolfe Digital Systems, Inc." <> > I am building an autonomouse aircraft for a school project; > I need pitch and roll sensors. Any suggestions? (would >...

Re: analog adxl202e   [3 Articles]

The ADXL202 is an interesting little device. I agree with almost all your statements but: 1. using op-amps one can scale and bias a DC voltage level signal ...

Analog reading of adxl202   [9 Articles]

Hi, I have gone through archives and most of the use of the adxl202 is reading the pwm output of the adxl202. Is there some one reading the analog outputs an...

Precision power supply   [5 Articles]

I read an interesting post on one of these maillists concerning the accuracy of the ADXL202 measurements being effected by the stability of the voltage supplied to ...

i/o pins   [2 Articles]

Hi der. I would just like to tell you that we have already made our robot walk. And i would like to thanka all of you who helped me with my problems, esp with t...

ADXL202 needed

does anybody in the seattle area have an adxl202 that they would like to part with OR that I can borow for about 2 weeks. I need to data log some vibrations c...

Problem about ADXL202   [2 Articles]

Hello....I have a problem here........ Is anybody here know how to transfer signal get from ADXL202 into the digital signal then send it to the PC by using serial ...

Re: BX-01 & PWM Input

the best bet for this is an optical sensor. white mark on a pully or shaft. light on this and an optical pickup like I used to detect white lines in the fire robot ...

Honeywell two-axis magnetic sensor   [2 Articles]

I know that some of you have successfully interfaced the ADXL202 sensor to a BX24. I have done this and found that I am having problems getting consistant readings ...

adxl202 readings   [4 Articles]

Howdy- I have a adxl202eb wired to my BX acording to the app note. I am running a 120K resistor and 2 .1uf caps as mentioned in previous posts. when it is si...

ADXL202JE Mounting   [3 Articles]

Hi, I picked up two ADXL202JE Accelerometers to hopefully detect "tilt" in all three axis. Per the application note, how to program and which "pins" to use a...

ADXL Accelerometer Question

I have an ADXL202 accelerometer attached to my BX24. I have things working fairly well. The ADXL is being used as a tiltmeter. When I place it level (x-axis perpind...

Re: Digest Number 581

Victor, Although I've thought of solving the V2X tilt problem the way you describe, I haven't tried it but I do have some familiarity with PNI products. I'm s...

V2X Module question

I have included an e-mail that I sent to PNI concerning their V2X compass system. I have the V2X running with a BX24 and would like to solve the gimbal situation in...

Adxl202 - Values for resistors/caps??   [2 Articles]

Hi Folks. I want to use the bx-24 and the adxl202, but am a little puzzled as to what to put in the excel spreadsheet to calc the right values for the resist...

Re: GPS communications   [2 Articles]

Tony, How about using an accelerometer, like the ADXL202, for motion and position sensing? Cheers, Mike ----- Original Message ----- From: "Tony...

Re: BX-24 wireless   [2 Articles]

On Mon, 14 Aug 2000 05:56:55 -0700 (PDT), Ray Pope <> wrote: > BX-24 > wireless 900Mhz transiever That sounds cool, but it would have to be small. > ...

Re: Re: Here is a arctangent function   [2 Articles]

Frank and Tony, Thanks for your response. I have looked at the MathUtilities file. I am not trying to find the angle between two unit vectors which is what ...

ADXL IC availibility   [5 Articles]

I have been working with the ADXL202 acelerometer for a while and finally seemed to have tamed it to my satisfaction. I have been using the ADXL202EB for my experim...

ADXL202 to BX24   [2 Articles]

I have interfaced a ADXL202EB to my BX24 and while I have been getting data from it, I seem to have a problem.. I HAVE installed the RSet resistor (120kOhms)and the...