Accelerometer | ADC | ADXL | Adxl20 | AVR | BasicStamp | BX-35 | BX28 | BX35 | COM3 | Compiler | Downloader | EEPROM | Electromagnet | GetADC | GP2D1 | GPS | I2C | IDE | Keypad | LCD | LCD+ | MIDI | Motors | Multitasking | Netmedia | Networking | PCB | PID | PlaySound | PWM | Relays | RTC | Servo | ShiftOut | SitePlayer | SPI | Stack | Timer | USB

binary out to pins   [3 Articles]

I know in the basic stamp I could output a number out to 8 outputs and these outputs are connected to LEDs and it would give it out in binary. Can I do this with the basicX and ...

Processor math speed   [2 Articles]

I'm am mixing some PWM signals and storing them as global variables (about 50 variables) to be used in different modules. I can store them as integers, but would like to do som...

DArn silly Basix X code issue   [2 Articles]

Hi I have an issue i want to call this call this sub routine once how ever no matter how i do it with this if then statment it allways calls it twice... has any one else ...

Re: Kalman Filter Code   [2 Articles]

I see this code is for PWM generating sensors, have you tried this code with ADC type? Cheers Ben ...

Strain Gauge   [4 Articles]

Dear Group: Greetings, I am a dental doctor & i am conducting a research on how much a pressure an artificial tooth can hold. I searched professional dental supplies and its no...

LED as simple light detector   [3 Articles]

Folks, here's a cool trick to detect light. Connect an LED - any LED should work, but I chose a phosphor "white" - between an analog input processor pin and ground. Connect th...

driving a 24v relay/transistor   [11 Articles]

I have to control a few 24v light bulbs using pins on the BX24. I'm wondering if there is a transistor I can use to power the bulbs directly . The bulbs draw 208ma. ...

Upgrade serial out command to com1

Hi, Attached is the upgraded serial output command subroutine. I?revised it to check the? ready bit before sending the output character. Now, It doesn't need the delay and wil...

Another odd GPS/queue problem   [3 Articles]

I'm confused (again) and would love some help. I am still trying to get my GPS application to give solid data. I've ripped the app down to the most basic components (simply p...

Vex: R/C signal generator   [4 Articles]

For some time, I've been intending to assemble a joystick and processor to generate a standard R/C ~1.5mS/50Hz PWM stream. I did not need the RF link of a transmitter-receiver p...