Sign in
Search avrclub
Subscribe to avrclub
avrclub by Keywords
AT90S2313 | AT90S8515 | ATMega | ATmega128 | ECL | FETS | IAR | Keyboard | LCD | STK50 | TMOS | UART
Ads
Discussion Groups
See Also
Discussion Groups | AVRclub | [AVR club] AVR bootloader Mega128
Atmel AVR Microcontroller discussion group.
[AVR club] AVR bootloader Mega128 - subedianjan - Jul 19 9:04:17 2007
We bought the Boot loader application and source code from Priio.
1. I compiled the bootloader.c ( changing baud rate to 2400 and xtl
to 8MHz)
and write_pages.s combined making a project in iccavr 7.13. I burnt
the
project in the microcontroller avr Atmeta128.
2. I ran the boot loader application in PC winxp, tried to download
an
application code.
3. I Pressed Jump to "Boot loader then Download button"
4. It shows the Status as : " Requesting Ack from target boot
loader. Try
#2. and it keeps trying and trying does not time out or responds
with any
error.
5. I am sure my Uart connection ( RS232) is working as I was able to
run
another small project to communicate with micro.
6. Hence, I am not able to download the application to the flash.
Am I following the right procedure?
Could you please let me know what might possibly, I am doing wrong?
When I look at the Memory map in the AVR simulator the data is
writen in upper section in the Memory area ( in the application area)
cheers
(You need to be a member of avrclub -- send a blank email to avrclub-subscribe@yahoogroups.com )
1. I compiled the bootloader.c ( changing baud rate to 2400 and xtl
to 8MHz)
and write_pages.s combined making a project in iccavr 7.13. I burnt
the
project in the microcontroller avr Atmeta128.
2. I ran the boot loader application in PC winxp, tried to download
an
application code.
3. I Pressed Jump to "Boot loader then Download button"
4. It shows the Status as : " Requesting Ack from target boot
loader. Try
#2. and it keeps trying and trying does not time out or responds
with any
error.
5. I am sure my Uart connection ( RS232) is working as I was able to
run
another small project to communicate with micro.
6. Hence, I am not able to download the application to the flash.
Am I following the right procedure?
Could you please let me know what might possibly, I am doing wrong?
When I look at the Memory map in the AVR simulator the data is
writen in upper section in the Memory area ( in the application area)
cheers
(You need to be a member of avrclub -- send a blank email to avrclub-subscribe@yahoogroups.com )
[AVR club] Re: AVR bootloader Mega128 - Stefan Wimmer - Jul 21 9:16:06 2007
--- In a...@yahoogroups.com, "subedianjan" wrote:
>
> We bought the Boot loader application and source code from Priio.
>
> 1. I compiled the bootloader.c ( changing baud rate to 2400 and xtl
> to 8MHz)
> and write_pages.s combined making a project in iccavr 7.13. I burnt
> the
> project in the microcontroller avr Atmeta128.
>
> 2. I ran the boot loader application in PC winxp, tried to download
> an
> application code.
>
> 3. I Pressed Jump to "Boot loader then Download button"....
>From their web pages:
Support:
If you need additional support on the above product, and you can't
find the information you need in the documentation, then please
contact support at the address below:
http://www.priio.com/
salesinfo AT priio.com
Did you try this?
______________________________
controlSUITE™ software. Comprehensive. Intuitive. Optimized.
Real-world software for real-time control. Details Here!
(You need to be a member of avrclub -- send a blank email to avrclub-subscribe@yahoogroups.com )
>
> We bought the Boot loader application and source code from Priio.
>
> 1. I compiled the bootloader.c ( changing baud rate to 2400 and xtl
> to 8MHz)
> and write_pages.s combined making a project in iccavr 7.13. I burnt
> the
> project in the microcontroller avr Atmeta128.
>
> 2. I ran the boot loader application in PC winxp, tried to download
> an
> application code.
>
> 3. I Pressed Jump to "Boot loader then Download button"....
>From their web pages:
Support:
If you need additional support on the above product, and you can't
find the information you need in the documentation, then please
contact support at the address below:
http://www.priio.com/
salesinfo AT priio.com
Did you try this?
______________________________
controlSUITE™ software. Comprehensive. Intuitive. Optimized.
Real-world software for real-time control. Details Here!
(You need to be a member of avrclub -- send a blank email to avrclub-subscribe@yahoogroups.com )