Sign in
Search AT91SAM
Subscribe to AT91SAM
Sponsor
Ads
Discussion Groups
See Also
Discussion Groups | AT91SAM ARM | Help please...
For users of the Atmel AT91SAM7 and AT91SAM9 ARM CPU chips. Atmel has taken a new direction by combining on chip flash and ram with the ARM CPU on a single die. This provides low cost devices for small systems using the ARM CPU. This group is to exchange information to help users get started and learn how to use the devices.
Help please... - prav...@gmail.com - Aug 27 13:40:51 2009
I'm a newbie in the field of embedded systems, For my project, I have to build an Image
processing application using Embedded systems.... I have with me a at91sam9263 board ... I
have also downloaded the yagarto gnu gcc arm cross compiler and the yagarto tools... Is
there any way to integrate opencv & yagarto with eclipse....??? And, is there any
at91sam9263 simulator....???
------------------------------------
(You need to be a member of AT91SAM -- send a blank email to AT91SAM-subscribe@yahoogroups.com )
------------------------------------
(You need to be a member of AT91SAM -- send a blank email to AT91SAM-subscribe@yahoogroups.com )
Re: Help please... - Arif Mansoori - Aug 27 14:34:31 2009
Pravin,
Try the Keil IDE for ARM microcontrollers, its a nice development environment where you can choose to either simulate or debug your program on the board. Eclipse is very limited when it comes to simulation.
By the way are you located in India, if yes where? How did you manage to get a board, I am looking for one too.
Arif
________________________________
From: "p...@gmail.com"
To: A...@yahoogroups.com
Sent: Thursday, August 27, 2009 11:40:23 AM
Subject: [AT91SAM] Help please...
I'm a newbie in the field of embedded systems, For my project, I have to build an Image processing application using Embedded systems.... I have with me a at91sam9263 board ... I have also downloaded the yagarto gnu gcc arm cross compiler and the yagarto tools... Is there any way to integrate opencv & yagarto with eclipse....? ?? And, is there any at91sam9263 simulator... .???
(You need to be a member of AT91SAM -- send a blank email to AT91SAM-subscribe@yahoogroups.com )
Try the Keil IDE for ARM microcontrollers, its a nice development environment where you can choose to either simulate or debug your program on the board. Eclipse is very limited when it comes to simulation.
By the way are you located in India, if yes where? How did you manage to get a board, I am looking for one too.
Arif
________________________________
From: "p...@gmail.com"
To: A...@yahoogroups.com
Sent: Thursday, August 27, 2009 11:40:23 AM
Subject: [AT91SAM] Help please...
I'm a newbie in the field of embedded systems, For my project, I have to build an Image processing application using Embedded systems.... I have with me a at91sam9263 board ... I have also downloaded the yagarto gnu gcc arm cross compiler and the yagarto tools... Is there any way to integrate opencv & yagarto with eclipse....? ?? And, is there any at91sam9263 simulator... .???
(You need to be a member of AT91SAM -- send a blank email to AT91SAM-subscribe@yahoogroups.com )
Re: Help please... - Praveen K - Aug 29 1:21:52 2009
Hi Arif,
Thanks for your reply, I'll check out keil and will get back to
you..... Btw, I got my at91sam9263 board from a company called Innovate
solutions in bangalore (http://www.innovatesolutions.net/) ...
Regards,
---------------------------------------------
Praveen Krishnakumar
Department of Mathematics and Computer Science,
Sri Sathya Sai University,
Prashanthinilayam,
INDIA.
On Thu, Aug 27, 2009 at 11:40 PM, Arif Mansooriwrote:
> Pravin,
>
> Try the Keil IDE for ARM microcontrollers, its a nice development
> environment where you can choose to either simulate or debug your program on
> the board. Eclipse is very limited when it comes to simulation.
>
> By the way are you located in India, if yes where? How did you manage to
> get a board, I am looking for one too.
>
> Arif
>
> ------------------------------
> *From:* "p...@gmail.com"
> *To:* A...@yahoogroups.com
> *Sent:* Thursday, August 27, 2009 11:40:23 AM
> *Subject:* [AT91SAM] Help please...
>
> I'm a newbie in the field of embedded systems, For my project, I have to
> build an Image processing application using Embedded systems.... I have with
> me a at91sam9263 board ... I have also downloaded the yagarto gnu gcc arm
> cross compiler and the yagarto tools... Is there any way to integrate opencv
> & yagarto with eclipse....? ?? And, is there any at91sam9263 simulator...
> .???
>
> start: 0000-00-00 end: 0000-00-00
(You need to be a member of AT91SAM -- send a blank email to AT91SAM-subscribe@yahoogroups.com )
Thanks for your reply, I'll check out keil and will get back to
you..... Btw, I got my at91sam9263 board from a company called Innovate
solutions in bangalore (http://www.innovatesolutions.net/) ...
Regards,
---------------------------------------------
Praveen Krishnakumar
Department of Mathematics and Computer Science,
Sri Sathya Sai University,
Prashanthinilayam,
INDIA.
On Thu, Aug 27, 2009 at 11:40 PM, Arif Mansoori
> Pravin,
>
> Try the Keil IDE for ARM microcontrollers, its a nice development
> environment where you can choose to either simulate or debug your program on
> the board. Eclipse is very limited when it comes to simulation.
>
> By the way are you located in India, if yes where? How did you manage to
> get a board, I am looking for one too.
>
> Arif
>
> ------------------------------
> *From:* "p...@gmail.com"
> *To:* A...@yahoogroups.com
> *Sent:* Thursday, August 27, 2009 11:40:23 AM
> *Subject:* [AT91SAM] Help please...
>
> I'm a newbie in the field of embedded systems, For my project, I have to
> build an Image processing application using Embedded systems.... I have with
> me a at91sam9263 board ... I have also downloaded the yagarto gnu gcc arm
> cross compiler and the yagarto tools... Is there any way to integrate opencv
> & yagarto with eclipse....? ?? And, is there any at91sam9263 simulator...
> .???
>
> start: 0000-00-00 end: 0000-00-00
(You need to be a member of AT91SAM -- send a blank email to AT91SAM-subscribe@yahoogroups.com )
Re: Help please... - Praveen K - Aug 29 5:36:33 2009
Hey Arif,
Can you give me some links from where I can download the
full version of Keil IDE for ARM microcontrollers ..... I'm not able to get
one....
Regards,
---------------------------------------------
Praveen Krishnakumar
Department of Mathematics and Computer Science,
Sri Sathya Sai University,
Prashanthinilayam,
INDIA.
On Sat, Aug 29, 2009 at 10:51 AM, Praveen K wrote:
> Hi Arif,
> Thanks for your reply, I'll check out keil and will get back to
> you..... Btw, I got my at91sam9263 board from a company called Innovate
> solutions in bangalore (http://www.innovatesolutions.net/) ...
>
> Regards,
> ---------------------------------------------
> Praveen Krishnakumar
> Department of Mathematics and Computer Science,
> Sri Sathya Sai University,
> Prashanthinilayam,
> INDIA.
>
> On Thu, Aug 27, 2009 at 11:40 PM, Arif Mansooriwrote:
>
>> Pravin,
>>
>> Try the Keil IDE for ARM microcontrollers, its a nice development
>> environment where you can choose to either simulate or debug your program on
>> the board. Eclipse is very limited when it comes to simulation.
>>
>> By the way are you located in India, if yes where? How did you manage to
>> get a board, I am looking for one too.
>>
>> Arif
>>
>> ------------------------------
>> *From:* "p...@gmail.com"
>> *To:* A...@yahoogroups.com
>> *Sent:* Thursday, August 27, 2009 11:40:23 AM
>> *Subject:* [AT91SAM] Help please...
>>
>> I'm a newbie in the field of embedded systems, For my project, I have to
>> build an Image processing application using Embedded systems.... I have with
>> me a at91sam9263 board ... I have also downloaded the yagarto gnu gcc arm
>> cross compiler and the yagarto tools... Is there any way to integrate opencv
>> & yagarto with eclipse....? ?? And, is there any at91sam9263 simulator...
>> .???
>>
>> start: 0000-00-00 end: 0000-00-00
(You need to be a member of AT91SAM -- send a blank email to AT91SAM-subscribe@yahoogroups.com )
Can you give me some links from where I can download the
full version of Keil IDE for ARM microcontrollers ..... I'm not able to get
one....
Regards,
---------------------------------------------
Praveen Krishnakumar
Department of Mathematics and Computer Science,
Sri Sathya Sai University,
Prashanthinilayam,
INDIA.
On Sat, Aug 29, 2009 at 10:51 AM, Praveen K
> Hi Arif,
> Thanks for your reply, I'll check out keil and will get back to
> you..... Btw, I got my at91sam9263 board from a company called Innovate
> solutions in bangalore (http://www.innovatesolutions.net/) ...
>
> Regards,
> ---------------------------------------------
> Praveen Krishnakumar
> Department of Mathematics and Computer Science,
> Sri Sathya Sai University,
> Prashanthinilayam,
> INDIA.
>
> On Thu, Aug 27, 2009 at 11:40 PM, Arif Mansoori
>
>> Pravin,
>>
>> Try the Keil IDE for ARM microcontrollers, its a nice development
>> environment where you can choose to either simulate or debug your program on
>> the board. Eclipse is very limited when it comes to simulation.
>>
>> By the way are you located in India, if yes where? How did you manage to
>> get a board, I am looking for one too.
>>
>> Arif
>>
>> ------------------------------
>> *From:* "p...@gmail.com"
>> *To:* A...@yahoogroups.com
>> *Sent:* Thursday, August 27, 2009 11:40:23 AM
>> *Subject:* [AT91SAM] Help please...
>>
>> I'm a newbie in the field of embedded systems, For my project, I have to
>> build an Image processing application using Embedded systems.... I have with
>> me a at91sam9263 board ... I have also downloaded the yagarto gnu gcc arm
>> cross compiler and the yagarto tools... Is there any way to integrate opencv
>> & yagarto with eclipse....? ?? And, is there any at91sam9263 simulator...
>> .???
>>
>> start: 0000-00-00 end: 0000-00-00
(You need to be a member of AT91SAM -- send a blank email to AT91SAM-subscribe@yahoogroups.com )
RE: Help please... - FreeRTOS Info - Aug 29 5:39:21 2009
>=20
> Hey Arif,
> Can you give me some links from where I can download
> the full version of Keil IDE for ARM microcontrollers ..... I'm not
> able to get one....
https://www.keil.com/product/prices.asp :o)
Regards,
Richard.
+ http://www.FreeRTOS.org
Designed for Microcontrollers. More than 7000 downloads per month.
+ http://www.SafeRTOS.com
Certified by T=DCV as meeting the requirements for safety related systems.
------------------------------------
(You need to be a member of AT91SAM -- send a blank email to AT91SAM-subscribe@yahoogroups.com )
Re: Help please... - Arif Mansoori - Aug 29 6:03:40 2009
Here it is https://www.keil.com/demo/eval/arm.htm
________________________________
From: Praveen K
To: A...@yahoogroups.com
Sent: Saturday, August 29, 2009 11:33:43 AM
Subject: Re: [AT91SAM] Help please...
Hey Arif,
Can you give me some links from where I can download the full version of Keil IDE for ARM microcontrollers ..... I'm not able to get one....
Regards,
------------ --------- --------- --------- ------
Praveen Krishnakumar
Department of Mathematics and Computer Science,
Sri Sathya Sai University,
Prashanthinilayam,
INDIA.
On Sat, Aug 29, 2009 at 10:51 AM, Praveen K wrote:
>
>Hi Arif,
> Thanks for your reply, I'll check out keil and will get back to you..... Btw, I got my at91sam9263 board from a company called Innovate solutions in bangalore (http://www.innovate solutions. net/) ...
>
>Regards,
>------------ --------- --------- --------- ------
>Praveen Krishnakumar
>Department of Mathematics and Computer Science,
>Sri Sathya Sai University,
>Prashanthinilayam,
>INDIA.
>On Thu, Aug 27, 2009 at 11:40 PM, Arif Mansoori wrote:
>
> >>
>>Pravin,
>>
>>Try the Keil IDE for ARM microcontrollers, its a nice development environment where you can choose to either simulate or debug your program on the board. Eclipse is very limited when it comes to simulation.
>>
>>By the way are you located in India, if yes where? How did you manage to get a board, I am looking for one too.
>>
>>Arif
________________________________
From: "pravinkenator@ gmail.com"
>>To: AT91SAM@yahoogroups .com
>>Sent: Thursday, August 27, 2009 11:40:23 AM
>>Subject: [AT91SAM] Help please...
>> >>
>>I'm a newbie in the field of embedded systems, For my project, I have to build an Image processing application using Embedded systems.... I have with me a at91sam9263 board ... I have also downloaded the yagarto gnu gcc arm cross compiler and the yagarto tools... Is there any way to integrate opencv & yagarto with eclipse....? ?? And, is there any at91sam9263 simulator... .???
>>
>>>>
>>start: 0000-00-00
>>end: 0000-00-00
>>
>
(You need to be a member of AT91SAM -- send a blank email to AT91SAM-subscribe@yahoogroups.com )
________________________________
From: Praveen K
To: A...@yahoogroups.com
Sent: Saturday, August 29, 2009 11:33:43 AM
Subject: Re: [AT91SAM] Help please...
Hey Arif,
Can you give me some links from where I can download the full version of Keil IDE for ARM microcontrollers ..... I'm not able to get one....
Regards,
------------ --------- --------- --------- ------
Praveen Krishnakumar
Department of Mathematics and Computer Science,
Sri Sathya Sai University,
Prashanthinilayam,
INDIA.
On Sat, Aug 29, 2009 at 10:51 AM, Praveen K
>
>Hi Arif,
> Thanks for your reply, I'll check out keil and will get back to you..... Btw, I got my at91sam9263 board from a company called Innovate solutions in bangalore (http://www.innovate solutions. net/) ...
>
>Regards,
>------------ --------- --------- --------- ------
>Praveen Krishnakumar
>Department of Mathematics and Computer Science,
>Sri Sathya Sai University,
>Prashanthinilayam,
>INDIA.
>On Thu, Aug 27, 2009 at 11:40 PM, Arif Mansoori
>
> >>
>>Pravin,
>>
>>Try the Keil IDE for ARM microcontrollers, its a nice development environment where you can choose to either simulate or debug your program on the board. Eclipse is very limited when it comes to simulation.
>>
>>By the way are you located in India, if yes where? How did you manage to get a board, I am looking for one too.
>>
>>Arif
________________________________
From: "pravinkenator@ gmail.com"
>>To: AT91SAM@yahoogroups .com
>>Sent: Thursday, August 27, 2009 11:40:23 AM
>>Subject: [AT91SAM] Help please...
>> >>
>>I'm a newbie in the field of embedded systems, For my project, I have to build an Image processing application using Embedded systems.... I have with me a at91sam9263 board ... I have also downloaded the yagarto gnu gcc arm cross compiler and the yagarto tools... Is there any way to integrate opencv & yagarto with eclipse....? ?? And, is there any at91sam9263 simulator... .???
>>
>>>>
>>start: 0000-00-00
>>end: 0000-00-00
>>
>
(You need to be a member of AT91SAM -- send a blank email to AT91SAM-subscribe@yahoogroups.com )
Re: Help please... - Arif Mansoori - Aug 29 6:04:58 2009
Here it is https://www.keil.com/demo/eval/arm.htm
________________________________
From: FreeRTOS Info
To: A...@yahoogroups.com
Sent: Saturday, August 29, 2009 11:39:15 AM
Subject: RE: [AT91SAM] Help please...
>
> Hey Arif,
> Can you give me some links from where I can download
> the full version of Keil IDE for ARM microcontrollers ..... I'm not
> able to get one....
https://www. keil.com/ product/prices. asp :o)
Regards,
Richard.
+ http://www.FreeRTOS.org
Designed for Microcontrollers. More than 7000 downloads per month.
+ http://www.SafeRTOS.com
Certified by TÜV as meeting the requirements for safety related systems.
______________________________
controlSUITE™ software. Comprehensive. Intuitive. Optimized.
Real-world software for real-time control. Details Here!
(You need to be a member of AT91SAM -- send a blank email to AT91SAM-subscribe@yahoogroups.com )
________________________________
From: FreeRTOS Info
To: A...@yahoogroups.com
Sent: Saturday, August 29, 2009 11:39:15 AM
Subject: RE: [AT91SAM] Help please...
>
> Hey Arif,
> Can you give me some links from where I can download
> the full version of Keil IDE for ARM microcontrollers ..... I'm not
> able to get one....
https://www. keil.com/ product/prices. asp :o)
Regards,
Richard.
+ http://www.FreeRTOS.org
Designed for Microcontrollers. More than 7000 downloads per month.
+ http://www.SafeRTOS.com
Certified by TÜV as meeting the requirements for safety related systems.
______________________________
controlSUITE™ software. Comprehensive. Intuitive. Optimized.
Real-world software for real-time control. Details Here!
(You need to be a member of AT91SAM -- send a blank email to AT91SAM-subscribe@yahoogroups.com )
Re: Help please... - rama subrahmanyam - Aug 29 12:10:39 2009
Hi Praveen!
Where did u got the AT91SAM9263 board in India. Iam looking for AT91SAM926x board. Pls give me the details of the vendor.
With regards,
Bh.Subrahmanyam.
--- On Sat, 29/8/09, Praveen K wrote:
From: Praveen K
Subject: Re: [AT91SAM] Help please...
To: A...@yahoogroups.com
Date: Saturday, 29 August, 2009, 3:03 PM
Hey Arif,
Can you give me some links from where I can download the full version of Keil IDE for ARM microcontrollers ..... I'm not able to get one....
Regards,
------------ --------- --------- --------- ------
Praveen Krishnakumar
Department of Mathematics and Computer Science,
Sri Sathya Sai University,
Prashanthinilayam,
INDIA.
On Sat, Aug 29, 2009 at 10:51 AM, Praveen K wrote:
Hi Arif,
Thanks for your reply, I'll check out keil and will get back to you..... Btw, I got my at91sam9263 board from a company called Innovate solutions in bangalore (http://www.innovate solutions. net/) ...
Regards,
------------ --------- --------- --------- ------
Praveen Krishnakumar
Department of Mathematics and Computer Science,
Sri Sathya Sai University,
Prashanthinilayam,
INDIA.
On Thu, Aug 27, 2009 at 11:40 PM, Arif Mansoori wrote:
Pravin,
Try the Keil IDE for ARM microcontrollers, its a nice development environment where you can choose to either simulate or debug your program on the board. Eclipse is very limited when it comes to simulation.
By the way are you located in India, if yes where? How did you manage to get a board, I am looking for one too.
Arif
From: "pravinkenator@ gmail.com"
To:
AT91SAM@yahoogroups .com
Sent: Thursday, August 27, 2009 11:40:23 AM
Subject: [AT91SAM] Help please...
I'm a newbie in the field of embedded systems, For my project, I have to build an Image processing application using Embedded systems.... I have with me a at91sam9263 board ... I have also downloaded the yagarto gnu gcc arm cross compiler and the yagarto tools... Is there any way to integrate opencv & yagarto with eclipse....? ?? And, is there any at91sam9263 simulator... .???
start: 0000-00-00
end: 0000-00-00
Love Cricket? Check out live scores, photos, video highlights and more. Click here http://cricket.yahoo.com
(You need to be a member of AT91SAM -- send a blank email to AT91SAM-subscribe@yahoogroups.com )
Where did u got the AT91SAM9263 board in India. Iam looking for AT91SAM926x board. Pls give me the details of the vendor.
With regards,
Bh.Subrahmanyam.
--- On Sat, 29/8/09, Praveen K
From: Praveen K
Subject: Re: [AT91SAM] Help please...
To: A...@yahoogroups.com
Date: Saturday, 29 August, 2009, 3:03 PM
Hey Arif,
Can you give me some links from where I can download the full version of Keil IDE for ARM microcontrollers ..... I'm not able to get one....
Regards,
------------ --------- --------- --------- ------
Praveen Krishnakumar
Department of Mathematics and Computer Science,
Sri Sathya Sai University,
Prashanthinilayam,
INDIA.
On Sat, Aug 29, 2009 at 10:51 AM, Praveen K
Hi Arif,
Thanks for your reply, I'll check out keil and will get back to you..... Btw, I got my at91sam9263 board from a company called Innovate solutions in bangalore (http://www.innovate solutions. net/) ...
Regards,
------------ --------- --------- --------- ------
Praveen Krishnakumar
Department of Mathematics and Computer Science,
Sri Sathya Sai University,
Prashanthinilayam,
INDIA.
On Thu, Aug 27, 2009 at 11:40 PM, Arif Mansoori
Pravin,
Try the Keil IDE for ARM microcontrollers, its a nice development environment where you can choose to either simulate or debug your program on the board. Eclipse is very limited when it comes to simulation.
By the way are you located in India, if yes where? How did you manage to get a board, I am looking for one too.
Arif
From: "pravinkenator@ gmail.com"
To:
AT91SAM@yahoogroups .com
Sent: Thursday, August 27, 2009 11:40:23 AM
Subject: [AT91SAM] Help please...
I'm a newbie in the field of embedded systems, For my project, I have to build an Image processing application using Embedded systems.... I have with me a at91sam9263 board ... I have also downloaded the yagarto gnu gcc arm cross compiler and the yagarto tools... Is there any way to integrate opencv & yagarto with eclipse....? ?? And, is there any at91sam9263 simulator... .???
start: 0000-00-00
end: 0000-00-00
Love Cricket? Check out live scores, photos, video highlights and more. Click here http://cricket.yahoo.com
(You need to be a member of AT91SAM -- send a blank email to AT91SAM-subscribe@yahoogroups.com )
Programming Problem! - Ali Ghadirzadeh - Aug 30 15:48:04 2009
Dear All;
I'm having trouble throuhg programming my chip. My chip is AT91SAM9260, Olimex Board.I cannot access the NandFlash using ISP 1.13. So whenever I want to program the chip, first I have to write into the SRAM then the Nandflash, but unfortunately my program is cleared when restarted!
your help is much appreciated
Regards;
A. Gh.
(You need to be a member of AT91SAM -- send a blank email to AT91SAM-subscribe@yahoogroups.com )
I'm having trouble throuhg programming my chip. My chip is AT91SAM9260, Olimex Board.I cannot access the NandFlash using ISP 1.13. So whenever I want to program the chip, first I have to write into the SRAM then the Nandflash, but unfortunately my program is cleared when restarted!
your help is much appreciated
Regards;
A. Gh.
(You need to be a member of AT91SAM -- send a blank email to AT91SAM-subscribe@yahoogroups.com )
Re: Programming Problem! - Microbit_Ubuntu - Aug 30 17:11:44 2009
Hi,
On Sun, 2009-08-30 at 05:22 -0700, Ali Ghadirzadeh wrote:
> Dear All;
>
> I'm having trouble throuhg programming my chip. My chip is
> AT91SAM9260, Olimex Board.I cannot access the NandFlash using ISP
> 1.13. So whenever I want to program the chip, first I have to write
> into the SRAM then the Nandflash, but unfortunately my program is
> cleared when restarted!
>
> your help is much appreciated
>
> Regards;
> A. Gh.
> Your email settings: Individual Email|Traditional
> Change settings via the Web (Yahoo! ID required)
> Change settings via email: Switch delivery to Daily Digest | Switch to
> Fully Featured
> Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
>
Just to make sure, is jumper NANDF_E closed ?
Also, if you use ISP SW itself, you first have to run the "enable"
script for DataFlash or NandFlash.
You can do this from TCL - but in your case, make sure you first click
the button "enable Nand Flash" in Atmel ISP SW.
Does the board still boot Linux properly as when you initially got it
from Olimex ? If it does/did then the CS is selected for Nand Flash
because that's where the rootfs is...
HTH
--
Best regards,
Kris
------------------------------------
(You need to be a member of AT91SAM -- send a blank email to AT91SAM-subscribe@yahoogroups.com )
On Sun, 2009-08-30 at 05:22 -0700, Ali Ghadirzadeh wrote:
> Dear All;
>
> I'm having trouble throuhg programming my chip. My chip is
> AT91SAM9260, Olimex Board.I cannot access the NandFlash using ISP
> 1.13. So whenever I want to program the chip, first I have to write
> into the SRAM then the Nandflash, but unfortunately my program is
> cleared when restarted!
>
> your help is much appreciated
>
> Regards;
> A. Gh.
> Your email settings: Individual Email|Traditional
> Change settings via the Web (Yahoo! ID required)
> Change settings via email: Switch delivery to Daily Digest | Switch to
> Fully Featured
> Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
>
Just to make sure, is jumper NANDF_E closed ?
Also, if you use ISP SW itself, you first have to run the "enable"
script for DataFlash or NandFlash.
You can do this from TCL - but in your case, make sure you first click
the button "enable Nand Flash" in Atmel ISP SW.
Does the board still boot Linux properly as when you initially got it
from Olimex ? If it does/did then the CS is selected for Nand Flash
because that's where the rootfs is...
HTH
--
Best regards,
Kris
------------------------------------
(You need to be a member of AT91SAM -- send a blank email to AT91SAM-subscribe@yahoogroups.com )