Sign in
Search AT91SAM
Subscribe to AT91SAM
Ads
Discussion Groups
See Also
Discussion Groups | AT91SAM ARM | IAR5.x fails to program sam7s
For users of the Atmel AT91SAM7 and AT91SAM9 ARM CPU chips. Atmel has taken a new direction by combining on chip flash and ram with the ARM CPU on a single die. This provides low cost devices for small systems using the ARM CPU. This group is to exchange information to help users get started and learn how to use the devices.
IAR5.x fails to program sam7s - Foltos - May 6 10:21:39 2009
Hi,
I am evaluation IAR 5.2 and IAR 5.3 products. Both seems to fails to
program the on chip FLASH of sam7s256 and sam7s64 chips. Version 5.2
hangs after a progress bar window pops up saying "Programming flash".
Version 5.3 reports an error in the debug log (similar to "Flash
programming failed.").
The same boards work fine with IAR 4.41.
Does anybody has a solution to this problem?
Foltos
------------------------------------
(You need to be a member of AT91SAM -- send a blank email to AT91SAM-subscribe@yahoogroups.com )
I am evaluation IAR 5.2 and IAR 5.3 products. Both seems to fails to
program the on chip FLASH of sam7s256 and sam7s64 chips. Version 5.2
hangs after a progress bar window pops up saying "Programming flash".
Version 5.3 reports an error in the debug log (similar to "Flash
programming failed.").
The same boards work fine with IAR 4.41.
Does anybody has a solution to this problem?
Foltos
------------------------------------
(You need to be a member of AT91SAM -- send a blank email to AT91SAM-subscribe@yahoogroups.com )
Re: IAR5.x fails to program sam7s - FireFox - May 8 6:59:44 2009
Arey you using J-Link? If yes, in version 5 you must remove selection on "download" under
link settings. Iar use the j-link utility and not the inside loader.
Best regards.
________________________________
Da: Foltos
A: A...@yahoogroups.com
Inviato: Mercoledì 6 maggio 2009, 16:21:30
Oggetto: [AT91SAM] IAR5.x fails to program sam7s
Hi,
I am evaluation IAR 5.2 and IAR 5.3 products. Both seems to fails to
program the on chip FLASH of sam7s256 and sam7s64 chips. Version 5.2
hangs after a progress bar window pops up saying "Programming flash".
Version 5.3 reports an error in the debug log (similar to "Flash
programming failed.").
The same boards work fine with IAR 4.41.
Does anybody has a solution to this problem?
Foltos
______________________________
controlSUITE™ software. Comprehensive. Intuitive. Optimized.
Real-world software for real-time control. Details Here!
(You need to be a member of AT91SAM -- send a blank email to AT91SAM-subscribe@yahoogroups.com )
Best regards.
________________________________
Da: Foltos
A: A...@yahoogroups.com
Inviato: Mercoledì 6 maggio 2009, 16:21:30
Oggetto: [AT91SAM] IAR5.x fails to program sam7s
Hi,
I am evaluation IAR 5.2 and IAR 5.3 products. Both seems to fails to
program the on chip FLASH of sam7s256 and sam7s64 chips. Version 5.2
hangs after a progress bar window pops up saying "Programming flash".
Version 5.3 reports an error in the debug log (similar to "Flash
programming failed.").
The same boards work fine with IAR 4.41.
Does anybody has a solution to this problem?
Foltos
______________________________
controlSUITE™ software. Comprehensive. Intuitive. Optimized.
Real-world software for real-time control. Details Here!
(You need to be a member of AT91SAM -- send a blank email to AT91SAM-subscribe@yahoogroups.com )
Re: IAR5.x fails to program sam7s - Foltos - May 8 7:23:13 2009
http-equiv="Content-Type">
Hi,
just to spare some trouble for others I post the solution to my
problem.
IAR changed the Atmel flash loader with version 5.x. Even 5.2 and 5.3
has a different version. The default flash loader parameters are not
correct. Check the example applications coming with IAR to see what
extra parameters are needed.
After parameters are correctly set, downloading works just fine.
Foltos
Foltos wrote:
Hi,
I am evaluation IAR 5.2 and IAR 5.3 products. Both seems to fails to
program the on chip FLASH of sam7s256 and sam7s64 chips. Version 5.2
hangs after a progress bar window pops up saying "Programming flash".
Version 5.3 reports an error in the debug log (similar to "Flash
programming failed.").
The same boards work fine with IAR 4.41.
Does anybody has a solution to this problem?
Foltos
__._,_.___
__,_._,___
______________________________
controlSUITE™ software. Comprehensive. Intuitive. Optimized.
Real-world software for real-time control. Details Here!
(You need to be a member of AT91SAM -- send a blank email to AT91SAM-subscribe@yahoogroups.com )