*****NEVYZIADANA POSTA***** Codewarrior and Motorola SDI, BDM port | 68HC12

Spam detection software, running on the system "fw2.vse.sk", has identified this incoming email as possible spam. The original message has been attached to this so you can view it (if it isn't spam) or block similar future email. If you have any questions, see the administrator of that system for details. Content preview: Hi, I'm using M68HC912B32EVB. I've been trying to use Motorola SDI as an interface between my EVB and Codewarrior. But the Codewarrior Dubugger can't detect my EVB. It keeps on saying that "Target not ready or not connected on COM2" when I do "Set Target". My connection is like this: [COM2 of PC] -> SDI -> [BDM port of EVB]. I also installed a jumper on the pin 3,4 of J51 of the SDI as instructed in the manual, this is to use standard supply for the SDI. And mine is Codewarrior Studio Special Edition only. I've seen that lots of people can use BDM port, hopefully you can have me out of this. Thanks alot. VT [...] Content analysis details: (8.6 points, 5.0 required) pts rule name description ---- ---------------------- -------------------------------------------------- 4.3 RCVD_IN_OPM RBL: Received via a relay in opm.blitzed.org [155.69.5.222 listed in opm.blitzed.org] 4.3 RCVD_IN_OPM_HTTP RBL: OPM: sender is open HTTP CONNECT proxy [155.69.5.222 listed in opm.blitzed.org] Tato posta je pravdepodobne nevyziadana. Povodna sprava bola umiestnena do prilohy, aby ste mohli podobnu postu v buducnosti bezpecne rozpoznat. Ak chcete, aby tato posta bola automaticky mazana, nastavte si pravidla na postovom servri (navod najdete na http://vsedw.inet.vse.sk/dokumenty/rozne/help/antispam/antispam.htm ) UPOZORNENIE: nezverejnujte svoju e-mail adresu na internete Nahlad obsahu: Hi, I'm using M68HC912B32EVB. I've been trying to use Motorola SDI as an interface between my EVB and Codewarrior. But the Codewarrior Dubugger can't detect my EVB. It keeps on saying that "Target not ready or not connected on COM2" when I do "Set Target". My connection is like this: [COM2 of PC] -> SDI -> [BDM port of EVB]. I also installed a jumper on the pin 3,4 of J51 of the SDI as instructed in the manual, this is to use standard supply for the SDI. And mine is Codewarrior Studio Special Edition only. I've seen that lots of people can use BDM port, hopefully you can have me out of this. Thanks alot. VT [...] Detaily vysledkov analyzy: (8.6 points, 5.0 required) 4.3 RCVD_IN_OPM RBL: Received via a relay in opm.blitzed.org [155.69.5.222 listed in opm.blitzed.org] 4.3 RCVD_IN_OPM_HTTP RBL: OPM: sender is open HTTP CONNECT proxy [155.69.5.222 listed in opm.blitzed.org] [Non-text portions of this message have been removed]

(You need to be a member of 68hc12 -- send a blank email to 68hc12-subscribe@yahoogroups.com )

Sign in

Search 68hc12

Subscribe to 68hc12

68hc12 by Keywords

Ads

Discussion Groups

Discussion Groups | 68HC12 | NEVYZIADANA POSTA Codewarrior and Motorola SDI, BDM port

***NEVYZIADANA POSTA* Codewarrior and Motorola SDI, BDM port - a2vutuan** - Feb 11 11:49:00 2004