*****NEVYZIADANA POSTA***** Re: programming 68hc12bc32 | 68HC12

Spam detection software, running on the system "fw2.vse.sk", has identified this incoming email as possible spam. The original message has been attached to this so you can view it (if it isn't spam) or block similar future email. If you have any questions, see the administrator of that system for details. Content preview: Thanks alot for your reply, In my last post, I said I need to use "Motorola SDI" to replace the use of SCI port. This means I am now using a debugger program that communicates with the HC12 board through SCI port. But then I need to use the SCI port for other purpose, that's why I need to find another way to program and debugger the HC12 NOT through SCI port. And then I try with the Motorola SDI through BDM. It seems to be that P&E Micro is the only one that supports Motorola SDI. But my P&E debugger program is spoilt...trying to find others. VT [...] Content analysis details: (8.6 points, 5.0 required) pts rule name description ---- ---------------------- -------------------------------------------------- 4.3 RCVD_IN_OPM RBL: Received via a relay in opm.blitzed.org [155.69.5.222 listed in opm.blitzed.org] 4.3 RCVD_IN_OPM_HTTP RBL: OPM: sender is open HTTP CONNECT proxy [155.69.5.222 listed in opm.blitzed.org] Tato posta je pravdepodobne nevyziadana. Povodna sprava bola umiestnena do prilohy, aby ste mohli podobnu postu v buducnosti bezpecne rozpoznat. Ak chcete, aby tato posta bola automaticky mazana, nastavte si pravidla na postovom servri (navod najdete na http://vsedw.inet.vse.sk/dokumenty/rozne/help/antispam/antispam.htm ) UPOZORNENIE: nezverejnujte svoju e-mail adresu na internete Nahlad obsahu: Thanks alot for your reply, In my last post, I said I need to use "Motorola SDI" to replace the use of SCI port. This means I am now using a debugger program that communicates with the HC12 board through SCI port. But then I need to use the SCI port for other purpose, that's why I need to find another way to program and debugger the HC12 NOT through SCI port. And then I try with the Motorola SDI through BDM. It seems to be that P&E Micro is the only one that supports Motorola SDI. But my P&E debugger program is spoilt...trying to find others. VT [...] Detaily vysledkov analyzy: (8.6 points, 5.0 required) 4.3 RCVD_IN_OPM RBL: Received via a relay in opm.blitzed.org [155.69.5.222 listed in opm.blitzed.org] 4.3 RCVD_IN_OPM_HTTP RBL: OPM: sender is open HTTP CONNECT proxy [155.69.5.222 listed in opm.blitzed.org] [Non-text portions of this message have been removed]

(You need to be a member of 68hc12 -- send a blank email to 68hc12-subscribe@yahoogroups.com )

VT, Commercial HC12 / HCS12 BDMs are available from Nohau, iSystems, Lauterbach, Noral, P&E, and Abatron. There are likely more that I am not aware of. Hope this helps, Doron Nohau Corporation HC12 In-Circuit Emulators www.nohau.com/emul12pc.html At 05:02 30/01/2004 +0000, you wrote: >Thanks alot for your reply, >In my last post, I said I need to use "Motorola SDI" to replace the >use of SCI port. This means I am now using a debugger program that >communicates with the HC12 board through SCI port. >But then I need to use the SCI port for other purpose, that's why I >need to find another way to program and debugger the HC12 NOT through >SCI port. >And then I try with the Motorola SDI through BDM. It seems to be that >P&E Micro is the only one that supports Motorola SDI. But my P&E >debugger program is spoilt...trying to find others. >VT >--- In , "James M. Knox" <jknox@t...> wrote: > > At 06:08 AM 1/8/2004 +0000, you wrote: > > >Hi James, > > >Could u tell me how to use BDM port for programming, debug the > > >68HC12BC32? > > > > >I read that we can actually use Motorola SDI through BDM > > >to replace the use of SCI port right? > > > > I guess I am not sure what you mean. Replace it to do what? >Certainly to > > replace the serial port for a serial debugger. There is very >little the > > average serial mode debugger program could do that can't be done >better > > (and faster) over the BDM. > > > > Hope this helps... > > jmk > > > > > > ----------------------------------------------- > > James M. Knox > > TriSoft ph 512-385-0316 > > 1109-A Shady Lane fax 512-366-4331 > > Austin, Tx 78721 jknox@t... > > ----------------------------------------------- [Non-text portions of this message have been removed]

(You need to be a member of 68hc12 -- send a blank email to 68hc12-subscribe@yahoogroups.com )

Sign in

Search 68hc12

Subscribe to 68hc12

68hc12 by Keywords

Ads

Discussion Groups

Discussion Groups | 68HC12 | NEVYZIADANA POSTA Re: programming 68hc12bc32

***NEVYZIADANA POSTA* Re: programming 68hc12bc32 - a2vutuan** - Jan 30 0:02:00 2004

Re: Re: programming 68hc12bc32 - Doron Fael - Jan 30 2:02:00 2004