68HC1 | 812A4 | 9S12DP256 | Bootloader | CodeWarrior | D60A | Debugger | DP256 | ECT | EEPROM | EVB | Flash | HC1 | HCS12 | I2C | IAR | ICC1 | Interrupts | LCD | M68KIT912DP256 | MC9S12DP256 | MC9S12DP256B | Metrowerks | Motor | MSCAN | Multilink | PLL | Quadrature | SDI | SPI | Transceiver | XFC

Hello,

I am looking for anyone who is willing to sell one or more of the old
Motorola SDI BDM pods. I believe the PN is M68SDIL12. If you have one
of these or know of someone who has one they would be willing to part
with, I would really appreciate getting in contact with them.

Thanks.



(You need to be a member of 68hc12 -- send a blank email to 68hc12-subscribe@yahoogroups.com )

Have you looked on EBay?

Emmett Redd Ph.D. mailto:E...@missouristate.edu
Professor (417)836-5221
Department of Physics, Astronomy, and Materials Science
Missouri State University Fax (417)836-6226
901 SOUTH NATIONAL Dept (417)836-5131
SPRINGFIELD, MO 65897 USA

A bad day doing research is better than a good day doing something else.

________________________________

From: 6...@yahoogroups.com [mailto:6...@yahoogroups.com] On
Behalf Of exiprez
Sent: Monday, August 20, 2007 3:43 PM
To: 6...@yahoogroups.com
Subject: [68HC12] Want to Buy 68HC12 Motorola SDI Debug Pod

Hello,

I am looking for anyone who is willing to sell one or more of
the old
Motorola SDI BDM pods. I believe the PN is M68SDIL12. If you
have one
of these or know of someone who has one they would be willing to
part
with, I would really appreciate getting in contact with them.

Thanks.

[Non-text portions of this message have been removed]


(You need to be a member of 68hc12 -- send a blank email to 68hc12-subscribe@yahoogroups.com )

Yes - I searched e-bay, Amazon and many other component and tools
search engines. Freescale lists the device as no longer
manufactured. I have a call into them to see if they have some
available (perhaps laying in an engineers desk drawer or something) -
just in case. I would even be willing to produce one if they would
part with the drawings.

I have considered other devices as an option. There are many fine
choices out there. My inexperience with them is making me reluctant
to seek that path. If anyone knows of one of these alternative
products that will work with the Metrowerks HIWAVE debugger and
exactly emulate the Motorola SDI pod I would consider this as a
backup plan.

Thanks

--- In 6...@yahoogroups.com, "Redd, Emmett R"
wrote:
>
> Have you looked on EBay?
>
> Emmett Redd Ph.D. mailto:EmmettRedd@...
> Professor (417)836-5221
> Department of Physics, Astronomy, and Materials Science
> Missouri State University Fax (417)836-6226
> 901 SOUTH NATIONAL Dept (417)836-5131
> SPRINGFIELD, MO 65897 USA
>
> A bad day doing research is better than a good day doing something
else.
>
> ________________________________
>
> From: 6...@yahoogroups.com [mailto:6...@yahoogroups.com]
On
> Behalf Of exiprez
> Sent: Monday, August 20, 2007 3:43 PM
> To: 6...@yahoogroups.com
> Subject: [68HC12] Want to Buy 68HC12 Motorola SDI Debug Pod
>
>
>
> Hello,
>
> I am looking for anyone who is willing to sell one or more of
> the old
> Motorola SDI BDM pods. I believe the PN is M68SDIL12. If you
> have one
> of these or know of someone who has one they would be willing
to
> part
> with, I would really appreciate getting in contact with them.
>
> Thanks.
>
>
>
>
>
> [Non-text portions of this message have been removed]
>



(You need to be a member of 68hc12 -- send a blank email to 68hc12-subscribe@yahoogroups.com )

exiprez wrote:

> I am looking for anyone who is willing to sell one or more of the old
> Motorola SDI BDM pods. I believe the PN is M68SDIL12. If you have one
> of these or know of someone who has one they would be willing to part
> with, I would really appreciate getting in contact with them.

Tell me when you want to come around to pick it up.

Oliver
--
Oliver Betz, Muenchen


(You need to be a member of 68hc12 -- send a blank email to 68hc12-subscribe@yahoogroups.com )

Hullo, I'm probably no help but I do have a couple of the P&E bdm pods
but they are for (1x PPC & 1x HC16),, these pods all have the same
general PCB, the difference is in the GAL which can be purchased from
P&E for the princely sum of $30usd.- so could be used and swapped for
the proper GAL. I would sell 1 for cheap, whatever you think is right.
regards, jd
--- In 6...@yahoogroups.com, "exiprez" wrote:
>
> Hello,
>
> I am looking for anyone who is willing to sell one or more of the old
> Motorola SDI BDM pods. I believe the PN is M68SDIL12. If you have
one
> of these or know of someone who has one they would be willing to part
> with, I would really appreciate getting in contact with them.
>
> Thanks.
>



(You need to be a member of 68hc12 -- send a blank email to 68hc12-subscribe@yahoogroups.com )

Hello,

I have written a wrapper DLL for my HC12POD.This can run as a SDIL12 with
Hiwave, but with faster
serial communication. Some info on:

http://www.krummsdorf.de/hc12icd/hardwa_e.html
http://www.krummsdorf.de/hc12icd/downlo_e.html

Some parts remains.

Pls e-mail me to my personal address.

Regards,
Juergen

-------------------------------
Dipl.Ing. J.Krummsdorf
-------------------------------
email: info (at) krummsdorf.de
--------------------------------

On Mon, 20 Aug 2007 22:43:20 +0200, exiprez wrote:

> Hello,
>
> I am looking for anyone who is willing to sell one or more of the old
> Motorola SDI BDM pods. I believe the PN is M68SDIL12. If you have one
> of these or know of someone who has one they would be willing to part
> with, I would really appreciate getting in contact with them.
>
> Thanks.



(You need to be a member of 68hc12 -- send a blank email to 68hc12-subscribe@yahoogroups.com )

Thank you. Can I arrange to have it mailed to me? I live in the US.

--- In 6...@yahoogroups.com, "Oliver Betz" wrote:
>
> exiprez wrote:
>
> > I am looking for anyone who is willing to sell one or more of the
old
> > Motorola SDI BDM pods. I believe the PN is M68SDIL12. If you
have one
> > of these or know of someone who has one they would be willing to
part
> > with, I would really appreciate getting in contact with them.
>
> Tell me when you want to come around to pick it up.
>
> Oliver
> --
> Oliver Betz, Muenchen
>



(You need to be a member of 68hc12 -- send a blank email to 68hc12-subscribe@yahoogroups.com )

Thank you for taking the time to respond.

I am looking specifically for the old Motorola SDI pod and unless I
am mistaken the P&E pods are not driver compatible. The device has
to use the Motorola SDIL driver and work with the HiWave debugger.

--- In 6...@yahoogroups.com, "timbomcnuckle" wrote:
>
> Hullo, I'm probably no help but I do have a couple of the P&E bdm
pods
> but they are for (1x PPC & 1x HC16),, these pods all have the same
> general PCB, the difference is in the GAL which can be purchased
from
> P&E for the princely sum of $30usd.- so could be used and swapped
for
> the proper GAL. I would sell 1 for cheap, whatever you think is
right.
> regards, jd
> --- In 6...@yahoogroups.com, "exiprez" wrote:
> >
> > Hello,
> >
> > I am looking for anyone who is willing to sell one or more of the
old
> > Motorola SDI BDM pods. I believe the PN is M68SDIL12. If you
have
> one
> > of these or know of someone who has one they would be willing to
part
> > with, I would really appreciate getting in contact with them.
> >
> > Thanks.
>


(You need to be a member of 68hc12 -- send a blank email to 68hc12-subscribe@yahoogroups.com )

>I am looking for anyone who is willing to sell one or more of the old
>Motorola SDI BDM pods. I believe the PN is M68SDIL12. If you have one
>of these or know of someone who has one they would be willing to part
>with, I would really appreciate getting in contact with them.

I have one that I can send you. It's been sitting in a box for 8 or
9 years, so I can't guarantee that it works, but send me your address
off-list and I'll mail it to you.

(At one time I had plans to have NoICE support it, but it never happened)
Best regards, John Hartman
NoICE Debugging Tools
http://www.noicedebugger.com
[Non-text portions of this message have been removed]


(You need to be a member of 68hc12 -- send a blank email to 68hc12-subscribe@yahoogroups.com )

"exiprez" wrote,

>Thank you. Can I arrange to have it mailed to me? I live in the US.

likely it's simpler for John.

Oliver
--
Oliver Betz, Muenchen (oliverbetz.de)



(You need to be a member of 68hc12 -- send a blank email to 68hc12-subscribe@yahoogroups.com )